SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2016 / Cilt: 26 - Sayı: 3

MURATA VORTEKS EĞİRME MAKİNESİ PARAMETRELERİNİN SEÇİMİ İÇİN MOORA TABANLI TAGUCHI OPTIMIZASYONU

MOORA-BASED TAGUCHI OPTIMIZATION FOR SELECTION OF MURATA VORTEX SPINNER MACHINE PARAMETERS

Esra AKGÜL
Hüseyin Gazi TÜRKSOY
Emel KIZILKAYA AYDOĞAN
Diyar AKAY
Pages
249–255
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The performances of these parameters are evaluated based on seven quality characteristics of MVS spun yarn using this method

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Murata Vortex Spinner (MVS) is accepted as one of the most promising new generation air jet spinning technology.
📊
Key Findings & Data:Selection of optimum MVS machine parameter which affects properties of the final yarn is difficult and complex task in textile industry.
💡
Conclusion & Impact:The performances of these parameters are evaluated based on seven quality characteristics of MVS spun yarn using this method
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Murata Vortex Spinner (MVS) is accepted as one of the most promising new generation air jet spinning technology. Selection of optimum MVS machine parameter which affects properties of the final yarn is difficult and complex task in textile industry. This study proposes the Multi-Objective Optimization on the Basis of Ratio Analysis (MOORA) - based Taguchi approach to select optimum nozzle pressure and delivery speed among available alternatives for cotton MVS yarn. The performances of these parameters are evaluated based on seven quality characteristics of MVS spun yarn using this method

Özet

Murata Vortex Eğirme (MVS) en umut verici yeni nesil hava jetli eğirme teknolojilerinden biri olarak kabul edilmektedir. Nihai iplik özelliklerini etkileyen optimum MVS makine parametresi seçimi tekstil sektöründe zor ve karmaşık bir görevdir. Bu çalışmada, MVS pamuk ipliği için, mümkün olan alternatifler arasından optimum düze basıncı ve üretim hızını seçmek için Multi-Objective Optimization on the Basis of Ratio Analysis (MOORA) tabanlı Taguchi yaklaşımı önerilmiştir. Bu parametrelerin performansları, bu method kullanılarak eğrilmiş MVS ipliklerinin yedi kalite karakteristiğine dayandırılarak değerlendirilmiştir

🔖

Cite This Article

AKGÜL, E., TÜRKSOY, H. G., AYDOĞAN, E. K., AKAY, D. (2022). MURATA VORTEKS EĞİRME MAKİNESİ PARAMETRELERİNİN SEÇİMİ İÇİN MOORA TABANLI TAGUCHI OPTIMIZASYONU. Tekstil ve Konfeksiyon, Cilt: 26 - Sayı: 3, 249–255. https://ajindex.com/articles/596732

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Murata vortex spinner. Retrieved May 2, 2015 from
  2. Lawrence, C., 2010, ‘Advantage is Yarn Spinning Technology’, Woodhead Publishing Limited, September, (pp:464)
  3. Erdumlu, N., Ozipek, B., Oztuna, A.S., Cetinkaya, S., 2009, ‘’Investigation of Vortex Spun Yarn Properties in Comparison with Conventional Ring and Openend Rotor Spun Yarns’’, Textile Research Journal, 79, (585-595)
  4. Erdumlu, N., Ozipek, B., 2010, ‘Effect Of The Draft Ratio On The Properties Of Vortex Spun Yarn’, Fibres&Textiles In Eastern Europa, 3(80), 38-42
  5. Murata Vortex Spinner (MVS) No.851 Instructional manuel. Osaka Japan: Muratec, Murata Machinery Ltd
  6. Ortlek, H.G., Ulku, S., 2005, ‘Effect of some variables on properties of 100% cotton vortex spun yarn’, Textile Research Journal, 75(6), (458–461)
  7. Ortlek, H.G., Ulku, Ş., 2007, ‘Effect of spandex and yarn counts on the properties of elastic core-spun yarns produced on murata vortex spinner’, Textile Research Journal, 77, (432-436)
  8. Tyagi, G.K., Sharma, D., 2004, ‘Performance and low-stress characteristics of polyester-cotton MVS yarns’, Indian J Fibre Textile Res, 29, (301–307)
  9. Basal, G., Oxenham, W., 2006, ‘Effects of some process parameters on the structure and properties of vortex spun yarn’, Textile Research Journal, 76(6), (492–499)
  10. Erdumlu N., Ozipek, B., Oxenham, W., 2012, ‘The Structure And Properties Of Carded Cotton Vortex Yarns’, Textile Research Journal, 82(7), (708–718)
  11. Erdumlu, N, Ozipek, B., Oxenham W., 2012, ‘Vortex spinning technology’, Textile Progress, 44(3-4), (141-174)
  12. Yang, W. H., Tarng, Y. S., 1998, “Design Optimization of Cutting Parameters for Turning Operations Based on the Taguchi Method.” Journal of Materials Processing Technology, 84, (122–129)
  13. Park, C.K., Ha, J., 2005, ‘A Process For Optimizing Sewing Conditions To Minimize Seam Pucker Using The Taguchi Method’, Textile Research Journal, 75(3), (245-252)
  14. Kuo, C.F.J., Su, T.l., T., C.P., 2007, ‘Optimization Of The Needle Punching Process For The Nonwoven Fabrics With Multiple Quality Characteristics By Grey-Based Taguchi Method’, Fiber And Polymers, 6(8), (654-664)
  15. Kumar, S., Satsangi, P. S., Prajapati, D.R., 2011, “Optimization of Green Sand Casting Process Parameters of a Foundry by Using Taguchi’s Method.” The International Journal of Advanced Manufacturing Technology, 55, (23–34)
  16. Tansel, I. N., Gülmez, S., Demetgul, M., Aykut, S., 2011, “Taguchi Method–Gonns Integrat