Journals / Tekstil ve Konfeksiyon / 2016 / Cilt: 26 - Sayı: 2

KONFOR ÖZELLİKLERİ GELİŞTİRİLMİŞ ELASTİK BANDAJLAR

ELASTIC BANDAGES WITH IMPROVED COMFORT PROPERTIES

Pages
172–179
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Alambeta test results confirmed that application of PCM microcapsules improved the thermal comfort properties of bandages in some extend

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Elastic bandage samples were produced on a crochet knitting machine utilizing some special polyester, cotton and viscose yarns.
📊
Key Findings & Data:Capillarity action played a significant role in water absorbency.
💡
Conclusion & Impact:Alambeta test results confirmed that application of PCM microcapsules improved the thermal comfort properties of bandages in some extend
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Elastic bandage samples were produced on a crochet knitting machine utilizing some special polyester, cotton and viscose yarns. Air permeability, porosity, thermal conductivity, thermal absorbtivity, thermal resistance and water absorbency of these bandages were compared. Results revealed that air permeability depended on fabric density and porosity. Capillarity action played a significant role in water absorbency. Particularly, channeled fiber structure improved water absorbency in a great extent. Thermal conductivity was affected by fiber type and fabric density. Cotton and viscose fibers, and dense fabric structure caused high thermal conductivity. Thermal resistance showed an opposite trend. In addition, in order to improve thermal comfort characteristics of the bandages phase change material (PCM) loaded microcapsules were applied to one of bandage samples. Alambeta test results confirmed that application of PCM microcapsules improved the thermal comfort properties of bandages in some extend

Özet

Özel poliester, pamuk ve viskon iplikleri kullanılarak kroşe örgü makinesinde elastik bandaj numuneleri üretilmiştir. Bu bandajların hava geçirgenlik, gözeneklilik, ısıl iletkenlik, ısıl soğurganlık, ısıl direnç ve su emicilikleri kıyaslanmıştır. Sonuçlar hava geçirgenliğinin kumaş yoğunluğu ve gözenekliliğe bağlı olduğunu ortaya koymuştur. Kapilarite su emiciliğinde önemli bir rol oynamaktadır. Özellikle, kanallı lif yapısı su emiciliğini büyük ölçüde iyileştirmektedir. Isıl iletkenlik lif tipi ve kumaş yoğunluğundan etkilenmektedir. Pamuk ve viskon lifleri ve sıkı kumaş yapısı yüksek ısıl iletkenliğe sebep olmaktadır. Isıl direnç tam tersi bir eğilim göstermektedir. Ayrıca, bir bandaj numunesine termal konfor özelliklerini geliştirmek için faz değiştirici materyal yüklü mikrokapsüller aplike edilmiştir. Alambeta test sonuçları faz değiştirici materyal yüklü mikrokapsüllerin bandajların ısıl konfor özelliklerini bir miktar iyileştirdiğini doğrulamıştır.

🔖

Cite This Article

BASAL, G., DEVECI, S. S. (2022). KONFOR ÖZELLİKLERİ GELİŞTİRİLMİŞ ELASTİK BANDAJLAR. Tekstil ve Konfeksiyon, Cilt: 26 - Sayı: 2, 172–179. https://ajindex.com/articles/596727

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Mecit D., Ilgaz S., Duran D. et. al., 2007, “Technical textiles and applications (part 1)”, Tekstil Ve Konfeksiyon, 17 (2), p: 79-82. 2. http://medical-dictionary.thefreedictionary.com (Accessed on 06.07.2015
  2. Simmers L.M., 2008, Diversified Health Occupations, Cengage Delmar Learning, p: 520 4. Günay, S., 1999, 2. Derece Ayak Bileği Burkulması Geçiren Sporcularda Elastik Bandaj ve Air-cast Brace Kullanımının Motor Performans Üzerine Etkisi, Bilim Uzmanlığı Tezi, Hacettepe Üniversitesi Sağlık Bilimleri Enstitüsü, Ankara, s:64
  3. Rigby, A.J. and Anand, S.C., 2003, Medical textiles, Handbook of Technical Textiles, Horrocks, A.R. and Anand S.C. (Eds.), Woodhead Publishing Ltd., Cambridge-England, p: 407-424 6. Ilgaz, S., Duran, D., Mecit, D. et al, 2007, “Medikal tekstiller”, Tekstil & Teknik, 23(265), p:138-162
  4. Spencer, D.J., 2001, Knitting Technology – A Comprehensive Handbook and Practical Guide, Woodhead Publishing Ltd., Cambridge-England, p: 386 8. Mazza, Z. and Zonda, P., 2002, Reference Books of Textile Technologies – Knitting, ACIMIT Foundation, Italy, p:117 9. Andreen, J. H., Gibson, J. W., and Wetmore, O. L., 1953, “Fabric Evaluations Based on Physiological Measurements of Comfort”, Textile Res. J. 23, p:11–22
  5. Gagge, A. P. and Gonzalez, R. R., 1974, Physiological and Physical Factors Associated with Warm Discomfort and Sedentary Man, Environ. Res. 7, p:230
  6. Goldman, R. F., Evaluating the Effect of Clothing on the Wearer, 1981, Bioengineering, Thermal Physiology and Comfort, Cena, K. and Clark, J. A., Eds., Elsevier Scientific Publishing Co., Chap. 3, Amsterdam
  7. Adler, M. M., and Walsh, W. K., 1984, “Mechanisms of Transient Moisture Transport Between Fabrics”, Textile Res. J. 54, p:334–343
  8. Pontrelli, G.J., 1990, “Comfort by design”, Textile Asia, 21(1), p:52–61
  9. Mehta, R., Narrasinham, K.V., 1987, “Clothing comfort – A review of related properties”, Man-made Textile in India, 30, pp. 327-35
  10. Hatch, K. L., Woo, S. S., Barker, R. L., Radhakrishnaiah, P., Markee, N.L. and Maibach, H.I., 1990, “In Vivo Cutaneous and Perceived Comfort Response to Fabric Part I: Thermophysiological Comfort Determinations for Three Experimental Knit Fabrics”, Textile Res. J. 60, 405–412
  11. Barker, R.L., Radhakrishnaiah, P., Woo, S.S., Hatch, K.L., Markee, N.L., Maibach, H.I., 1990, “In vivo cutaneous and perceived comfort response to fabric, Part II: mechanical and surface related comfort property determinates for three experimental