Journals / Teknik Dergi / 2005 / Cilt: 16 - Sayı: 3

4 node assumed strees hybrid membrane finite element

4 noktalı, gerilme seçimli bir hibrit mambran sonlu eleman

Pages
3643–3655
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results obtained from numerical examples demonstrate that the element produces accurate solutions which are in a good agreement with other state-of-the-art element solutions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Finite element method based on the assumed-stress hybrid method is a way of formulating a stiffness matrix by use of independent assumptions of an equilibrium stress field within the element and interelement compatible displacement modes on the element boundary.
📊
Key Findings & Data:In this study a 4-node quadrilateral assumed-stress hybrid membrane element is presented.
💡
Conclusion & Impact:The results obtained from numerical examples demonstrate that the element produces accurate solutions which are in a good agreement with other state-of-the-art element solutions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Finite element method based on the assumed-stress hybrid method is a way of formulating a stiffness matrix by use of independent assumptions of an equilibrium stress field within the element and interelement compatible displacement modes on the element boundary. In this study a 4-node quadrilateral assumed-stress hybrid membrane element is presented. The element has 12 d.o.f’s , two translational and one rotational d.o.f. for each joint. The results obtained from numerical examples demonstrate that the element produces accurate solutions which are in a good agreement with other state-of-the-art element solutions.

Özet

Gerilme seçimli hibrid sonlu eleman yöntemi, eleman içinde denge denklemlerini sağlayan gerilme alanı seçimi ile eleman sınırlarında uyumlu yer değiştirmelerin seçimi ilkesine dayanmaktadır. Çalışmada, düzlem elastisite problemlerinin çözümü için, 4 noktalı, genel biçimli, gerilme seçimli, hibrid bir mambran sonlu eleman geliştirilmiştir. Formulasyon Hellinger-Reissner ilkesi esas alınarak elde edilmiştir. Eleman, her düğüm noktasında iki öteleme ve bir dönme bileşeni olmak üzere toplam 12 serbestlik derecesi içermektedir. Geliştirilen eleman ile literatürdeki çalışmalarda bulunan çeşitli örnekler çözülmüş ve uyumlu sonuçlar elde edilmiştir.

🔖

Cite This Article

KUMBASAR, N., DARILMAZ, K. (2022). 4 node assumed strees hybrid membrane finite element. Teknik Dergi, Cilt: 16 - Sayı: 3, 3643–3655. https://ajindex.com/articles/596628

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. Pian, T. H. H., Derivation of Element Stiffness Matrices by Assumed Stress Distributions, AIAA Journal, 2 (7), 1333-1336, 1964. 2.Kumbasar, N., A Hybrid Finite Element Obtained Using Shallow Shell Relations, Bulletin of the Technical University of Istanbul, 45, 349-361, 1992. 3.Allman D. J., A Compatible Triangular Element Including Vertex Rotations for Plane Elasticity Analysis, Comp. Struct., 19, 1-8, 1984. 4.Cook R. D., On the Allman Triangle and a Related Quadrilateral Element, Comp. Struct, 22, 1065-1067, 1986. 5.Rengarajan G., Aminpour M. A., Norman F. K., Improved Assumed-Stress Hybrid Shell Element with Drilling Degrees of Freedom for Linear Stress, Buckling and Free Vibration Analyses, Int. Jour. Num. Meth., 38, 1917-1943, 1995. 6.Aminpour M. A., Direct Formulation of a Hybrid 4-node Shell Element with Drilling Degrees of Freedom, Int. J. Num. Meth. 35,997-1013, 1992. 7.Darılmaz K., Kabuk Sistemlerin Çözümü için Hibrid bir Sonlu Eleman, Doktora Tezi, İ.T.Ü Fen Bilimleri Enstitüsü, İstanbul, 2003. 8.Wilson E., Habibullah A., SAP2000
  2. Structural Analysis Program, Computers and Structures Inc., 2000. 9.Choi CK, Lee TY, Chung KY, Direct Modification for Non-conforming Elements with Drilling DOF, Int. J. Numer. Meth. Engng., 55, 1463-1476 2002. 10.Iura M, Atluri SN., Formulation of a Membrane Finite Element with Drilling Degrees of Freedom, Computational Mechanics, 9, 417-428, 1992. 11.Cook R. D., A Plane Hybrid Element with Rotational DOF and Adjustable Stiffness,Int. J. Num. Meth., 24,. 1499-1508, 1987. 12.MacNeal RH., Harder RL, A Proposed Standard Set of Problems to Test Finite Element Accuracy, Finite Elements in Analysis and Design, 1, 3-20, 1985. 13.Aköz AY, Omurtag MH, Doğruoğlu AN, The Mixed Finite Element Formulation for Three-Dimensional Bars, Int. J. Numer. Meth. Engng., 28 (2), 225-234, 1991.