Journals / Teknik Dergi / 2007 / Cilt: 18 - Sayı: 3

Experimental investigation of strip footing reinforced sand slope

Donatılı kum ve şeve oturan şerit temelin deneysel olarak incelenmesi

Pages
4197–4217
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finally, it was concluded that the ultimate bearing capacity values of strip footing on sloping ground can, depending on the remforcement geogrid arrangement, be increased up to six times that of the unreinforced case.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the ultimate bearing capacity of shallow foundation on geogrid-reinforced sandy slope was investigated using a small scale laboratory tests.
📊
Key Findings & Data:Strip footing was used in the model tests.
💡
Conclusion & Impact:Finally, it was concluded that the ultimate bearing capacity values of strip footing on sloping ground can, depending on the remforcement geogrid arrangement, be increased up to six times that of the unreinforced case.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the ultimate bearing capacity of shallow foundation on geogrid-reinforced sandy slope was investigated using a small scale laboratory tests. Strip footing was used in the model tests. The parameters investigated include the location of the first layer of reinforcement, the number of reinforcement layer and the vertical spacing of remforcement layer. Some practical design parameters were suggested for the relevant foundation engineering applications. The results of the study were compared with the existing methods and a general agreement was observed. Finally, it was concluded that the ultimate bearing capacity values of strip footing on sloping ground can, depending on the remforcement geogrid arrangement, be increased up to six times that of the unreinforced case.

Özet

Bu çalışmada, geogrid ile güçlendirilmiş şevli zemin üzerine oturan, yüzeysel temelin taşıma kapasitesi, laboratuvar ortamında küçük ölçekli model deneyler yapılarak araştırılmıştır. Yüzeysel temel olarak şerit temel kullanılmıştır. Model deneylerde; ilk donatı derinliği, donatı tabaka sayısı ve temelin şev tepesinden uzaklığı gibi parametrelerin taşıma kapasitesine etkisi araştırılmıştır. Elde edilen deneysel sonuçlar değerlendirilerek, temel mühendisliği uygulamalarında kullanılmak üzere tasarım parametreleri önerilmiştir. Sonuçlar mevcut yöntemlerle karşılaştırılmış ve genel bir uyum gözlenmiştir. Sonuçta şevli zemine oturan bir şerit temelin nihai taşıma kapasitesinin, uygun donatı yerleşimine bağlı olarak, donatışız duruma göre, altı kata kadar arttırılabileceği görülmüştür.

🔖

Cite This Article

UNCUOĞLU, E., LAMAN, M., YILDIZ, L., KESKİN, M. S. (2022). Experimental investigation of strip footing reinforced sand slope. Teknik Dergi, Cilt: 18 - Sayı: 3, 4197–4217. https://ajindex.com/articles/596616

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Coduto, D. P., Foundation Design: Principles and Practices, 2nd Edition, New Jersey, Prentice Hall, 2000
  2. Meyerhof, G. G., The Ultimate Bearing Capacity of Foundations on Slopes, in Proc, IV Int. Conf. Soil Mech. Found. Eng., London England, 1, 384-386, 1957
  3. Das, B. M., Shallow Foundations: Bearing Capacity and Settlement, CRC Pres, 1999
  4. Hansen, J. B., A Revised and Extended Formula for Bearing Capacity, Bulletin 28, Danish Geotechnical Institute, Copenhagen, 5-11, 1970
  5. Vesic, A. S., Bearing Capacity of Shallow Foundations, in Foundation Engineering Handbook, Winterkorn, H. F. And Fang, H. Y., Eds., Van Nostrant Reinhold Co., 121,1975
  6. Graham, J., Andrews, M. And Shields, D. H., Stres Characteristics for Shallow Footings in Cohesionless Slopes, Canadian Geotech. J., 25 (2), 238-249, 1988
  7. Shields, D., Chandler, N. And Gamier, J., Bearing Capacity of Foundations in Slopes, J. Geotech. Eng., ASCE, 116 (3), 528-537, 1990
  8. Gemperline, M. C, Centrifuge Modelling of Shallow Foundations, in Proc, ASCE Spring Convention, 1988
  9. Vidal, H.,La Terre Arme. Annales de L'Intitut Technique du Batiment et des Travoux Publics, 888-938, 1968 (as referred by Das, 1999)
  10. Selvadurai, A. P. S., Gnanendran, C. T., An Experimental Study of a Footing Located on a Sloped Fill: Influence of a Soil Reinforcement Layer, Canadian Geotechnical Journal, 26 (3), 467-473, 1989
  11. Huang, C, Tatsuoka, F., Sato, Y., Failure Mechanisms of Reinforced Sand Slopes Loaded with a Footing, Soils and Foundations, 24 (2), 27-40, 1994
  12. Lee, K. M., Manjunath, V. R., Experimental and Numerical Studies of Geosynthetic-Reinforced Sand Slopes Loaded with a Footing, Can. J. Geotech./Rev. Can. Geotech., 37(4), 828-842, 2000
  13. Yoo, C, Laboratory Investigation of Bearing Capacity Behavior of Strip Footing on Geogrid-Reinforced Sand Slope, Geotextiles and Geomembranes, 19, 279-298, 2001
  14. Bathurst, R. J., Blatz, J. A., and Burger, M. H., Performance of Instrumented Large-Scale Unreinforced and Reinforced Embankments Loaded by a Strip Footing to Failure, Can. Geotech. J., 40, 1067-1083, 2003
  15. Briançon, L., Girard, H., Poulain, D., Slope Stability of Lining Systems-Experimental Modeling of Friction at Geosynthetic Interfaces, Geotextiles and Geomembranes, 20, 147-172,2002
  16. Yıldız, A., Donatılı Zeminler Üzerine Oturan Yüzeysel Temellerin Analizi, Doktora Tezi, Çukurova Üniversitesi, Fen Bilimleri Enstitüsü, Adana, 2002
  17. Yetimoğlu, T., Geogri