Journals / Teknik Dergi / 2022 / Cilt: 33 - Sayı: 4

The High Temperature Performance Evaluation of Polymer/Nanocomposite Modified Asphalt Cement

Pages
12143–12162
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Optimum concentration was found to be 5% ASA/Si composite, as further addition of polymer nanocomposite resulted in lower enhancement in the rheological properties of modified AC due to the occurrence of agglomeration between the composite and the base binder.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The current study focuses on the effect of Acrylate-styrene-acrylonitrile (ASA)/Nanosilica (Si) modified binders on the complex modulus (G*) and rutting resistance parameters (G*/ sinδ) of Asphalt Cement (AC).
📊
Key Findings & Data:Four different blends including the base binder and the polymer nanocomposites which were formed by blending 5% ASA to base binder with the addition of nanosilica at 3, 5 and 7% by the weight were the subject of investigations.
💡
Conclusion & Impact:Optimum concentration was found to be 5% ASA/Si composite, as further addition of polymer nanocomposite resulted in lower enhancement in the rheological properties of modified AC due to the occurrence of agglomeration between the composite and the base binder.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Rheological characterization · polymer/nanocomposite · acrylate-styrene-acrylonitrile

Abstract

The current study focuses on the effect of Acrylate-styrene-acrylonitrile (ASA)/Nanosilica (Si) modified binders on the complex modulus (G*) and rutting resistance parameters (G*/ sinδ) of Asphalt Cement (AC). Four different blends including the base binder and the polymer nanocomposites which were formed by blending 5% ASA to base binder with the addition of nanosilica at 3, 5 and 7% by the weight were the subject of investigations. Conventional and Dynamic Shear Rheometer (DSR) testing procedures were conducted as well as morphology analysis using Fourier Transform Infrared Spectroscopy (FT-IR). The rheological characteristics of AC were analysed by master curves, isochronal plots and rutting resistance parameter plots. Test results revealed that G* and G*/ sinδ of all modified samples were significantly enhanced compared to the base binder. Multiple Stress Creep Recovery Test (MSCRT) conducted at 100 Pa and 3200 Pa showed that, non-recoverable compliance was reduced and elastic recovery of modified binders were improved. Optimum concentration was found to be 5% ASA/Si composite, as further addition of polymer nanocomposite resulted in lower enhancement in the rheological properties of modified AC due to the occurrence of agglomeration between the composite and the base binder.

Özet

The current study focuses on the effect of Acrylate-styrene-acrylonitrile (ASA)/Nanosilica (Si) modified binders on the complex modulus (G*) and rutting resistance parameters (G*/ sinδ) of Asphalt Cement (AC). Four different blends including the base binder and the polymer nanocomposites which were formed by blending 5% ASA to base binder with the addition of nanosilica at 3, 5 and 7% by the weight were the subject of investigations. Conventional and Dynamic Shear Rheometer (DSR) testing procedures were conducted as well as morphology analysis using Fourier Transform Infrared Spectroscopy (FT-IR). The rheological characteristics of AC were analysed by master curves, isochronal plots and rutting resistance parameter plots. Test results revealed that G* and G*/ sinδ of all modified samples were significantly enhanced compared to the base binder. Multiple Stress Creep Recovery Test (MSCRT) conducted at 100 Pa and 3200 Pa showed that, non-recoverable compliance was reduced and elastic recovery of modified binders were improved. Optimum concentration was found to be 5% ASA/Si composite, as further addition of polymer nanocomposite resulted in lower enhancement in the rheological properties of modified AC due to the occurrence of agglomeration between the composite and the base binder.

🔖

Cite This Article

ALAS, M., GÖKÇEKUŞ, H., ISMAEL, A. S. A. (2022). The High Temperature Performance Evaluation of Polymer/Nanocomposite Modified Asphalt Cement. Teknik Dergi, Cilt: 33 - Sayı: 4, 12143–12162. https://ajindex.com/articles/596541

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Ahmed AW, Said SF, Lu X, Carlsson H. Pavement performance follow-up and evaluation of polymer-modified test sections. International Journal of Pavement Engineering. 2019;20(12):1474-87
  2. Al-Mansob RA, Ismail A, Yusoff NIM, Albrka SI, Azhari CH, Karim MR. Rheological characteristics of unaged and aged epoxidised natural rubber modified asphalt. Construction and Building Materials. 2016;102:190-9
  3. Mahali I, Sahoo UC. Rheological characterization of Nanocomposite modified asphalt binder. International Journal of Pavement Research and Technology. 2019;12(6):589-94
  4. Crucho J, Picado-Santos L, Neves J, Capitão S. A Review of Nanomaterials’ Effect on Mechanical Performance and Aging of Asphalt Mixtures. Applied Sciences. 2019;9(18):3657
  5. Ponniah J, Kennepohl G. Polymer-modified asphalt pavements in Ontario: Performance and cost-effectiveness. Transportation research record. 1996;1545(1):151-60
  6. Porto M, Caputo P, Loise V, Eskandarsefat S, Teltayev B, Oliviero Rossi C. Bitumen and bitumen modification: A review on latest advances. Applied Sciences. 2019;9(4):742
  7. Ameri M, Mansourian A, Sheikhmotevali AH. Investigating effects of ethylene vinyl acetate and gilsonite modifiers upon performance of base bitumen using Superpave tests methodology. Construction and Building Materials. 2012;36:1001-7
  8. Brovelli C, Hilliou L, Hemar Y, Pais J, Pereira P, Crispino M. Rheological characteristics of EVA modified bitumen and their correlations with bitumen concrete properties. Construction and Building Materials. 2013;48:1202-8
  9. Garcia-Morales M, Partal P, Navarro F, Gallegos C. Effect of waste polymer addition on the rheology of modified bitumen. Fuel. 2006;85(7-8):936-43
  10. Garcı́a-Morales M, Partal P, Navarro F, Martı́nez-Boza F, Gallegos C, González N, et al. Viscous properties and microstructure of recycled eva modified bitumen. Fuel. 2004;83(1):31-8
  11. Yuanita E, Hendrasetyawan B, Firdaus D, Chalid M, editors. Improvement of polypropylene (PP)-modified bitumen through lignin addition. IOP Conf Ser Mater Sci Eng; 2017
  12. Bala N, Napiah M, Kamaruddin I, Danlami N. Rheological properties investigation of bitumen modified with nanosilica and polyethylene polymer. International Journal of Advanced and Applied Sciences. 2017;4(10):165-74
  13. Brasileiro L, Moreno-Navarro F, Tauste-Martínez R, Matos J, Rubio-Gámez MdC. Reclaimed polymers as asphalt binder modifiers for more sustainable roads: A review. Sustainability. 2019;11(3):646. [