Journals / Tarım Bilimleri Dergisi / 2010 / Cilt: 16 - Sayı: 2

Evaluation of Seed distribution in the horizontal plane and plant growing area for Row Seeding using Voronoi polygons

Sıraya ekimde yatay düzlemdeki tohum dağılımı ve bitki yasam alanının voronoi poligonlarıyla değerlendirilmesi

Pages
97–103
Publication Date
2022-10-17
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The shape of growing area of wheat seeds was much more different than the shape of ideal growing area when the forward speed of the seeder was increased from 0.7 to 1.5 m $s^ {-1,}$ because of increased displacement of seeds from the intended position.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The growing area of the each plant was calculated using Delaunay triangulation and Voronoi polygons to analyse the seed distribution uniformity after seeding.
📊
Key Findings & Data:Wheat, soybean and maize were sown for field trials.
💡
Conclusion & Impact:The shape of growing area of wheat seeds was much more different than the shape of ideal growing area when the forward speed of the seeder was increased from 0.7 to 1.5 m $s^ {-1,}$ because of increased displacement of seeds from the intended position.
🔬Design:Experimental Field Trial
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The growing area of the each plant was calculated using Delaunay triangulation and Voronoi polygons to analyse the seed distribution uniformity after seeding. Wheat, soybean and maize were sown for field trials. Seed distribution uniformity in the horizontal plane was analysed by seed spacing and growing area criteria. The results of the both criteria were compared. The results of the research showed that seed spacing and growing area evaluation criteria gave similar results for soybean and maize because of the larger row spacing of these seeds. Analysing the seed distribution in the horizontal plane using only seed spacing criterion was insufficient for wheat. Because row spacing of wheat was narrower and growing area of wheat plants was affected by the lateral scatters of the seeds as much as seed spacing. The shape of growing area of wheat seeds was much more different than the shape of ideal growing area when the forward speed of the seeder was increased from 0.7 to 1.5 m $s^ {-1,}$ because of increased displacement of seeds from the intended position.

Özet

Bu arastırmada, ekim sonrası tarladaki tohum dağılımını incelemek için her bitkiye düsen yasam alanı hesaplanmıstır. Bitkilerin yasam alanının belirlenmesinde Delaunay üçgenlemesi ve bunun esleniği olan Voronoi poligonları kullanılmıstır. Tarla denemeleri için buğday, soya ve mısır ekimi yapılmıs, ekim sonrası yatay düzlemdeki tohum dağılım düzgünlüğünü değerlendirmek için bitkilerin sıra üzeri uzaklık ve yasam alanı değerleri ölçülmüstür. Arastırma sonuçlarına göre, soya ve mısır ekiminde, yasam alanı kullanılarak yapılan değerlendirmeye paralel sonuçlar elde edilmistir. Buğday ekiminde ise sıra arası uzaklık daha dar olduğu için, sadece sıra üzeri uzaklık kullanılarak yapılan değerlendirmenin yetersiz olacağı saptanmıstır. Dar sıra arası uzaklıklarda, sıra üzeri uzaklık kadar, tohumların sıradan sapma miktarı da yasam alanını ve dolayısıyla yatay düzlemdeki tohum dağılımını etkilemistir. Buğday ekiminde ilerleme hızının 0.7 m $s^ {-1,}$’den 1.5 m $s^ {-1,}$‘e yükselmesi ise, tohumların çizi içerisindeki yer değistirmesini arttırdığı için, bitkilerin gerçek yasam alanının sekli ile ideal yasam alanı sekli arasındaki farklılık artmıstır.

🔖

Cite This Article

KARAYEL, D. (2022). Evaluation of Seed distribution in the horizontal plane and plant growing area for Row Seeding using Voronoi polygons. Tarım Bilimleri Dergisi, Cilt: 16 - Sayı: 2, 97–103. https://ajindex.com/articles/595115

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. Bildirici İ Ö & Selvi H Z (2005). Model genellestirmesinde geometri değisimlerinden alançizgi dönüsüm yöntemleri. 10. Türkiye Harita Bilimsel ve Teknik Kurultayı Mart 2005, Ankara Gaikwad B B & Sirohi N P S (2008). Design of a lowcost pneumatic seeder for nursery plug trays. Biosystems Engineering 99: 322-329
  2. Griepentrog H W (1998). Seed distribution over the area. AgEng, Oslo, Paper 98-A-059 ISO (1984). Sowing Equipment - Test Methods. Part I: Single Seed Drills (Precision Drills), 7256/1 Kachman S D & Smith J A (1995). Alternative measures of accuracy in plant spacing for planters using single seed metering. Transactions of the ASAE 38(2): 379-387 Karayel D & Özmerzi A (2001). Hava emisli bir tek dane ekici düzen ile kavun ve hıyar ekiminde sıra üzeri uzaklık ve ilerleme hızının ekim düzgünlüğüne etkisi. Akdeniz Üniversitesi Ziraat Fakültesi Dergisi 14(2): 63-67 Karayel D & Özmerzi A (2002). Effect of tillage methods on sowing uniformity of maize. Canadian Biosystems Engineering 44: 23-26
  3. Önal İ (1995). Ekim-Dikim-Gübreleme Makinaları. Ege Üniversitesi Ziraat Fakültesi Yayınları,
  4. Bornova, İzmir Panning J W, Kocher M F, Smith J A & Kachman S D (2000). Laboratory and field testing of seed spacing uniformity for sugarbeet planters. Applied Engineering in Agriculture 16(1): 7-13
  5. Topakci M, Celik H K, Canakci M, Rennie A E W, Akinci I & Karayel D (2010). Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine. Journal of Food, Agriculture & Environment 8(2): 531-536
  6. Yanalak M (1997). Sayısal Arazi Modellerinden Hacim Hesaplarında En Uygun Enterpolasyon Yönteminin Arastırılması. Doktora tezi, İstanbul Teknik Üniversitesi Fen Bilimleri Enstitüsü (Basılmamıs), İstanbul Yazgi A & Degirmencioglu A (2007). Optimisation of the seed spacing uniformity performance of a vacuum-type precision seeder using response surface methodology. Biosystems Engineering 97: 347-356