Journals / Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2018 / Cilt: 22 - Sayı: Özel

Analysis of Angle of Twist of Axially Layered Functionally Graded Circular Hollow Shafts

Eksenel Yönde Tabakalı Fonksiyonel Derecelendirilmiş Dairesel İçi Boş Şaftların Burulma Açısı Analizi

Pages
556–560
Publication Date
2022-10-17
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The mostmeaningful layers on response were obtained as first layer with 52.83 % effectratio, second layer with 29.41% effect ratio, and third layer with 17.76 % effectratio.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the angle of twist of axially layered functionally gradedcircular hollow shafts subjected to a twisting torque at the free end was analyzedunder clamped-free boundary conditions using finite element software ANSYS.
📊
Key Findings & Data:Layer locations on the shafts were performed using L9orthogonal array based on Taguchi Method.
💡
Conclusion & Impact:The mostmeaningful layers on response were obtained as first layer with 52.83 % effectratio, second layer with 29.41% effect ratio, and third layer with 17.76 % effectratio.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the angle of twist of axially layered functionally gradedcircular hollow shafts subjected to a twisting torque at the free end was analyzedunder clamped-free boundary conditions using finite element software ANSYS. Thehollow shafts were made using three layers including various mixtures of ceramicand metal materials. Layer locations on the shafts were performed using L9orthogonal array based on Taguchi Method. The layer combination with optimumlevels was obtained using analysis of the signal-to-noise (S/N) ratio. Significantlayers and their percent effects on the angles of twist were analyzed using analysisof variance (ANOVA). According to results obtained, the increase of the ceramicmaterial in layers leads to the decrease of the angle of twist of the beams. The mostmeaningful layers on response were obtained as first layer with 52.83 % effectratio, second layer with 29.41% effect ratio, and third layer with 17.76 % effectratio.

Özet

Bu çalışmada, serbest uçundan burulma torkuna maruz kalmış eksenel yönde tabakalı fonksiyonel derecelendirilmiş dairesel içi boş şaftların tutuluserbest sınır şartı altında sonlu elemanlar yazılımı ANSYS kullanarak burulma açısı analiz edilmiştir. Dairesel içi boş şaftlar seramik ve metal malzemelerin değişik karışımlarını içeren üç tabaka kullanarak yapıldı. Şaftlar üzerinde tabaka konumları Taguchi metoduna bağlı L9 ortogonal dizi kullanılarak gerçekleştirildi. Optimum seviyeli tabaka kombinasyonu sinyal-gürültü oran analizi kullanılarak elde edildi. Burulma açısı üzerinde önemli tabakalar ve onların yüzde etkileri varyans analizi (ANOVA) kullanılarak analiz edildi. Elde edilen sonuçlara göre, tabakalardaki seramik malzeme artışı kirişlerin burulma açısı azalmasını sağlamıştır. Yanıtlar üzerinde en anlamlı tabakalar % 52.83 etki oranı ile birinci tabaka, % 29.41 etki oranı ile ikinci tabaka ve % 17.76 etki oranı ile üçüncü tabaka olarak elde edilmiştir.

🔖

Cite This Article

EVRAN, S. (2022). Analysis of Angle of Twist of Axially Layered Functionally Graded Circular Hollow Shafts. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 22 - Sayı: Özel, 556–560. https://ajindex.com/articles/593943

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Shen, H.-S., 2009. Functionally graded materials: nonlinear analysis of plates and shells, CRC Press, Boca Raton; New York; London
  2. Birman, V., Byrd, L.W., 2007. Modeling and Analysis of Functionally Graded Materials and Structures, Applied Mechanics Reviews, 60(2007), 195-216
  3. Koizumi, M., 1997. FGM activities in Japan, Composites Part B: Engineering, 28(1997), 1-4
  4. Batra, R.C., 2006. Torsion of a Functionally Graded Cylinder, AIAA Journal, 44(2006), 1363- 1365
  5. Arghavan, S., Hematiyan, M.R., 2009. Torsion of functionally graded hollow tubes, European Journal of Mechanics - A/Solids, 28(2009), 551- 559
  6. Horgan, C.O., Chan, A.M., 1998. Torsin of Functionally Graded Isotropic Linearly Elastic Bars, Journal of Elasticity, 52(1998), 181-199
  7. Rahaeifard, M., 2015. Size-dependent torsion of functionally graded bars, Composites Part B: Engineering, 82(2015), 205-211
  8. Uymaz, B., Aydogdu, M., 2007. Three- Dimensional Vibration Analyses of Functionally Graded Plates under Various Boundary Conditions, Journal of Reinforced Plastics and Composites, 26(2007), 1847-1863
  9. Ferreira, A.J.M., 2009. MATLAB codes for finite element analysis solids and structures, [New York, NY]; Springer
  10. Ross, P.J., 1996. Taguchi Techniques for Quality Engineering; McGraw-Hill International Editions, 2nd Edition, New York, USA
  11. ANSYS Help, Version 13
  12. ANSYS Software (ANSYS Inc., Canonsburg, PA, USA) (www.ansys.com
  13. Minitab Software (Minitab Inc. State College, PA, USA) (www.minitab.com)