SavedAdd your journal

Journals / Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2018 / Cilt: 22 - Sayı: 2

Engineering Characteristics of Geopolymer Mortars Manufactured with Ground Granulated Blast Furnace Slag

Öğütülmüş Yüksek Fırın Cürufu ile Üretilen Geopolimer Harçların Mühendislik Özellikleri

Bekir ÇOMAK
Pages
470–476
Publication Date
2022-10-17
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of the study, it wasdetermined that geopolymers prepared with GGBFS can also be used in the areaswhere blast furnace slag cement would be used.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Geopolymers are obtained by various methods in different alkalineenvironments by changing compositions and crystal structures of pozzolans, whichhave Al and Si oxide compounds in their structures and carry little or no hydrauliccharacteristics.
📊
Key Findings & Data:In this study, mechanical and physical characteristics ofgeopolymer mortars manufactured with ground granulated blast furnace slag(GGBFS) and activated with sodium silicate (water glass) were determined andalso their SEM-EDS analyses were performed.
💡
Conclusion & Impact:As a result of the study, it wasdetermined that geopolymers prepared with GGBFS can also be used in the areaswhere blast furnace slag cement would be used.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Geopolymers are obtained by various methods in different alkalineenvironments by changing compositions and crystal structures of pozzolans, whichhave Al and Si oxide compounds in their structures and carry little or no hydrauliccharacteristics. In this study, mechanical and physical characteristics ofgeopolymer mortars manufactured with ground granulated blast furnace slag(GGBFS) and activated with sodium silicate (water glass) were determined andalso their SEM-EDS analyses were performed. As a result of the study, it wasdetermined that geopolymers prepared with GGBFS can also be used in the areaswhere blast furnace slag cement would be used.

Özet

Geopolimerler, yapısında Al ve Si oksit bileşiği bulunduran, hidrolik özelliği olmayan veya çok az olan puzolanların, farklı alkali ortamlarda kompozisyonları ve kristal yapılarının çeşitli yöntemlerle değiştirilmesi sonucu elde edilirler. Bu çalışmada, Sodyum silikat (Cam Suyu) ile aktive edilmiş, öğütülmüş yüksek fırın cürufu (YFC) ile üretilen geopolimer harçların mekanik, fiziksel özelliklerinin belirlenmesinin yanı sıra SEM-EDS analizleri yapılmıştır. Çalışmanın sonucunda; yüksek fırın cüruflu çimentonun kullanılacağı alanlarda YFC ile hazırlanan geopolimerlerin de kullanılabileceği belirlenmiştir.

🔖

Cite This Article

ÇOMAK, B. (2022). Engineering Characteristics of Geopolymer Mortars Manufactured with Ground Granulated Blast Furnace Slag. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 22 - Sayı: 2, 470–476. https://ajindex.com/articles/593935

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Aleem, M. I. A., Arumairaj, P. D. 2012. Geopolymer Concrete-A Revıew. International Journal of Engineering Sciences & Emerging Technologies. 1(2), 118-22.
  2. Köleli, Y. 2015. TR63 Bölgesi Çimento Sektör Raporu. Doğu Akdeniz Kalkınma Ajansı: Doğu Akdeniz Kalkınma Ajansı. Tokyay, M., Erdoğdu, K. 2009. Cüruflar ve Cüruflu Çimentolar. TÇMB / AR-GE / Y 972. Ankara:
  3. TÇMB. Baradan, B., Yazıcı, H., Aydın, S. 2012. Beton. İzmir: Dokuz Eylül Üniversitesi Mühendislik Fakültesi Yayınları.
  4. Dorum, A., Koçak, Y., Yılmaz, B., Uçar, A. 2009. The Effects of Blast Furnace Slag on the Cement Surface Properties and Hydration. Journal of the Institute of Science and Technology of Dumlupinar University. 19, 47-58.
  5. El-Didamony, H., Amer, A. A., El-Sokkary, T. M., Abd-El-Aziz, H. 2013. Effect of substitution of granulated slag by air-cooled slag on the properties of alkali activated slag. Ceramics International. 39(1), 171-81.
  6. Praveen, J. A., Senthilkumar, P., Sridhar, J., Nickson, S. 2015. A Comparative Study of Alkali Activated Slag and Fly Ash-Based Geopolymer Concrete. International Journal of Innovative Research in Science, Engineering and Technology. 2001, 10151-10156.
  7. Universit, B., Benbouali, H. 2009. Some Parameters Affecting the Heat of Hydration of Blast-Furnace Slag. SBEIDCO – 1st International Conference on Sustainable Built Environment Infrastructures in Developing Countries ENSET. (Durability of materials and structures), 8-16.
  8. Davidovits, J. 1991. Geopolymers: Inorganic Polymeric New Materials. Journal of Thermal Analysis. 37, 1633-1656.
  9. Xu, H., Van Deventer, J. S. J. 2000. The geopolymerisation of alumino-silicate minerals. International Journal of Mineral Processing. 59(3), 247-266.
  10. Görhan, G., Kürklü, G. 2014. Alkali Tuz İçeriğinin Geopolimer Cephe Kaplama Malzemesi Özelliklerine Etkisi. 7 Ulusal Çatı & Cephe Sempozyumu. İstanbul, 51-58.
  11. Altan, E., Erdogan, S. T. 2012. Alkali activation of a slag at ambient and elevated temperatures. Cement Concrete Comp., 34(2), 131-139.
  12. Chi, M. 2012. Effects of dosage of alkali-activated solution and curing conditions on the properties and durability of alkali-activated slag concrete. Construction and Building Materials. 35, 240- 245. Dutta, D., Ghosh, S. 2014. Durability Study of Geopolymer Paste Blended with Blast Furnace Slag. IOSR Journal of Mechanical and Civil Engineering, 11(2), 73-79.
  13. Madheswaran, C. K., Gnanasundar, G, Gopalakrishnan, N. 2013. Effect of molarity in geopolymer concrete. International Journal of Civil and