Journals / Selcuk Dental Journal / 2020 / Cilt: 7 - Sayı: 1

Evaluation of laminate veneer preparation depth with 3D systems

Lamina veneer preparasyon derinliklerinin 3B sistemler ile değerlendirilmes

Pages
81–89
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Statisticalanalysis were performed with one-way ANOVA (p < 0.05).Results: PP results showed mean values in the Incisal of0.328+0.045 mm, Middle of 0.375+0.097 mm and Cervical of0.471+0.07 mm.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Background: Preparation depth of laminate veneers are essential inretention and structural integrity of restorations.
📊
Key Findings & Data:The aim of this studywas to evaluate the difference between a trained professionalprosthodontist (PP) and a postgraduate prosthodontics student (PPS)in the preparation depth of laminate veneers by scanning the toothwith a 3D scanner before and after the preparation.Methods: Twenty extracted human maxillary central incisors wereevaluated by a PP and PPS.
💡
Conclusion & Impact:Statisticalanalysis were performed with one-way ANOVA (p < 0.05).Results: PP results showed mean values in the Incisal of0.328+0.045 mm, Middle of 0.375+0.097 mm and Cervical of0.471+0.07 mm.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Background: Preparation depth of laminate veneers are essential inretention and structural integrity of restorations. The aim of this studywas to evaluate the difference between a trained professionalprosthodontist (PP) and a postgraduate prosthodontics student (PPS)in the preparation depth of laminate veneers by scanning the toothwith a 3D scanner before and after the preparation.Methods: Twenty extracted human maxillary central incisors wereevaluated by a PP and PPS. A 0.5 mm depth guide bur was used infor facial reduction and a 1 mm incisal reduction was performed witha deep chamfer. The teeth were scanned with a laser scanner at anaccuracy of 10 µm. The teeth were separated into 3 parts (incisal,middle and cervical) and then 5 points were randomly selected on theunprepared tooth and then lapped over when the preparation hadbeen completed. The data of the difference was calculated in 3Dscanning software Magics (Materialise NV, Belgium). Statisticalanalysis were performed with one-way ANOVA (p < 0.05).Results: PP results showed mean values in the Incisal of0.328+0.045 mm, Middle of 0.375+0.097 mm and Cervical of0.471+0.07 mm. PPS results showed mean values in the Incisal of0.323+0.056 mm, Middle results of 0.403+0.083 mm and Cervicalresults of 0.462+0.075 mm.Conclusion: These results suggest that a PP or a PPS can bothachieve the same precision in the preparation using a depth guidebur.

Özet

Amaç: Lamina veneer restorasyonlarında preparasyon derinliği, yapısal sağlamlığın ve tutuculuğun sağlanmasında temel faktörlerin başında gelir. Bu çalışmanın amacı, deneyimli bir prostodontist (PP) ve yüksek lisans protodonti öğrencisinin (PPS) lamina preparasyon derinliklerinin, preparasyon öncesinde ve sonrasında 3B tarayıcı ile farklılıklarının değerlendirilmesidir. Gereç ve yöntemler: PP ve PPS 20 adet çekilmiş insan maksiller santral kesiciyi değerlendirmiştir. Fasiyel preparasyon için 0,5 mm’lik derinlik rehberli frez kullanılmıştır. İnsizal preparasyon için ise 1 mm’lik champher frez kullanılmıştır. Dişler, 10 µm hassasiyetinde lazer tarayıcı ile taranmıştır. Dişler 3 kısıma (insizal, orta ve servikal) bölünmüş ve 5 noktadan incelenmiştir. Preparasyon yapılmamış ve yapılmış dişler üst üste çakıştırılarak Magics (Materialise NV, Belgium) 3B tarama yazılımında aralarındaki farklar incelenmiştir. İstatistiksel analiz tek yünlü ANOVA ile yapılmıştır (p < 0.05). Bulgular: PP sonuçları ortalama insizalde 0.328+0.045 mm, ortada 0.375+0.097 mm, servikalde ise 0.471+0.07 mm olurken, PPS sonuçları ortalama insizalde 0.323+0.056 mm, ortada 0.403+0.083 mm ve servikalde 0.462+0.075 mm olarak bulunmuştur. Sonuç: Bu sonuçlar, derinlik belirleyici frez kullanıldığında PP ve PPS benzer preparasyon hassasiyet gösterdiğini belirtmektedir.

🔖

Cite This Article

ASLAN, Y. U., ÖZTOPRAK, O., ÖZKAN, Y. K. (2022). Evaluation of laminate veneer preparation depth with 3D systems. Selcuk Dental Journal, Cilt: 7 - Sayı: 1, 81–89. https://ajindex.com/articles/591431

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Akoğlu B, Gemalmaz D. Fracture resistance of ceramic veneers with different preparation designs. J Prosthodont. 2011; 20(5): 380–4
  2. Aristidis GA, Dimitra B. Five-year clinical performance of porcelain laminate veneers. Quintessence Int. 2002; 33: 185–9
  3. Beier US, Kapferer I, Burtscher D, Dumfahrt H. Clinical performance of porcelain laminate veneers for up to 20 years. J Prosthodont. 2012; 25: 79–85
  4. Brunton PA, Aminian A, Wilson NH. Tooth preparation techniques for porcelain laminate veneers. Br Dent J. 2000; 189(5): 260–2
  5. Castelnuovo J, Tjan AHL, Phillips K, Nicholls JI, Kois JC. Fracture load and mode of failure of ceramic veneers with different preparations. J Prosthet Dent. 2000; 83: 171-80
  6. Cherukara GP, Seymour KG, Samarawickrama DYD, Zou L. A study into the variations in the labial reduction of teeth prepared to receive porcelain veneers- a comparison of three clinical techniques. Br Dent J. 2002; 192: 401-4
  7. Cherukara GP, Seymour KG, Zou L, Samarawickrama DYD. Geographic distribution of porcelain veneer preparation depth with various clinical techniques. J Prosthet. Dent. 2003; 89: 544-50
  8. Ferrari M, Patroni S, Balleri P. Measurement of enamel thickness in relation to reduction for etched laminate veneers. Int J Periodontics Restorative Dent. 1992; 12: 407–13
  9. Durán Ojeda G, Henríquez Gutiérrez I, Guzmán Marusic Á, Báez Rosales A, Tisi Lanchares JP. A Step-by-Step Conservative Approach for CADCAM Laminate Veneers. Case Rep Dent. 2017; 2017: 3801419. 10.Subaşı MG, Alp G, Johnston WM, Yilmaz B. Effect of thickness on optical properties of monolithic CAD-CAM ceramics. J Dent. 2018; 71: 38-42. 11.Coachman C, Gurel G, Calamita M, Morimoto S, Paolucci B, Sesma N. The influence of tooth color on preparation design for laminate veneers from a minimally invasive perspective: case report. Int J Periodontics Restorative Dent. 2014; 34(4): 453-9. 12.Tuğcu E, Vanlıoğlu B, Özkan YK, Aslan YU. Marginal adaptation and fracture resistance of lithium disilicate laminate veneers on teeth with different preparation depths. Int J Periodontics Restorative Dent. 2018; 38: 87–95. 13.Garber DA, Goldstein RE, Feinman RA. Porcelain Laminate Veneers. Quintessence Publ.; 1988, p: 11-13, 36-50. 14.Hahn P, Gustav M, Hellwig E. An in vitro assessment of the strength of porcelain veneers dependent on tooth preparation. J. Oral Rehabil. 2000; 27: 1024-9. 15.Hui KKK., Williams B, Davis EH, Holt RD. A comparative assessment of the strengths of porcelain v