Journals / Tekstil ve Konfeksiyon / 2013 / Cilt: 23 - Sayı: 4

Effect of ambient parameters on morphology of electrospun polyetherimide (pei) fibers

Çevresel parametrelerin elektrospin yöntemiyle üretilmiş polieterimid liflerinin morfolojisi üzerindeki etkileri

Pages
313–318
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The experimental results show that average diameter of electrospun PEI fibers increases with increasing relative humidity at all ambient temperatures.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Electrospinning is a method that produces fibers with diameters ranging from a few micrometers down to under hundred nanometers.
📊
Key Findings & Data:In this study, the influence of temperature and relative humidity on the morphology of electrospun polyetherimide (PEI) fibers is investigated. 1-methyl-2-pyrrolidinone (NMP) is used as a solvent.
💡
Conclusion & Impact:The experimental results show that average diameter of electrospun PEI fibers increases with increasing relative humidity at all ambient temperatures.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Electrospinning is a method that produces fibers with diameters ranging from a few micrometers down to under hundred nanometers. In this study, the influence of temperature and relative humidity on the morphology of electrospun polyetherimide (PEI) fibers is investigated. 1-methyl-2-pyrrolidinone (NMP) is used as a solvent. Surface morphologies and diameters of electrospun PEI fibers are examined by Field-Emission Scanning Electron Microscopy (FESEM). The experimental results show that average diameter of electrospun PEI fibers increases with increasing relative humidity at all ambient temperatures. As the temperature increase, average diameter of electrospun PEI fibers decreases. Surface roughness of the fibers increases with increasing of RH. The whole of the electrospun PEI fibers obtained are circular shaped.

Özet

Elektrospin yöntemi, birkaç mikrometreden 100 nanometrenin altlarına kadar farklı çaplarda lif üretimi sağlayan bir metottur. Bu çalışmada ortam sıcaklığı ve bağıl nemin, elektrospin yöntemiyle üretilen polieterimid (PEI) liflerinin morfolojisi üzerindeki etkileri araştırılmıştır. Çözücü olarak 1-metil 2-pirolidon (NMP) kullanılmıştır. Elektrospin yöntemiyle üretilen PEI liflerinin yüzey morfolojileri ve çapları Alan Emisyonlu Taramalı Elektron Mikroskobu (FESEM) ile analiz edilmiştir. Elde edilen deneysel sonuçlara göre tüm sıcaklık değerleri için bağıl nemin artmasıyla ortalama PEI lif çapları artmaktadır. Ortam sıcaklığının artmasıyla ortalama PEI lif çaplarının azaldığı görülmüştür. Liflerin yüzey pürüzlülükleri, bağıl nemin artmasıyla artmıştır. Elde edilen tüm PEI liflerinin kesit şekillerinin dairesel olduğu gözlemlenmiştir.

🔖

Cite This Article

OĞULATA, R. T., İÇOĞLU, H. İ. (2022). Effect of ambient parameters on morphology of electrospun polyetherimide (pei) fibers. Tekstil ve Konfeksiyon, Cilt: 23 - Sayı: 4, 313–318. https://ajindex.com/articles/589048

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Baumgarten P.K., 1971, “Electrostatic Spinning of Acrylic Microfibers”, Journal of Colloid and Interface Science, 36(1), 71-79
  2. Doshi J. and Reneker D.H., 1995. “Electrospinning Process and Applications of Electrospun Fibers”, Journal of Electrostatics, 35(2-3), 151-160
  3. Uçar N., Ayaz O., Öksüz M., Önen A., Bahar E., Uçar M., Demir A., İlhan M., Wang Y., 2011, “Production of Elastomeric Polymer Fiber Web by Electrospinning Process”, Tekstil ve Konfeksiyon, 21(1), 10-15
  4. Formhals A., 1934, “Process and Apparatus for Preparing Artificial Threads”, US Patent, 1,975,504
  5. Taylor G., 1964, “Disintegration of Water Drops in an Electric Field”, Proceedings of the Royal Society of London A, 280(1382), 383-397
  6. Jin W.J., Jeon H.J., Kim J.H. and Youk J.H., 2007. “A Study on the Preparation of Poly(vinyl alcohol) Nanofibers Containing Silver Nanoparticles”, Synthetic Metals, 157, 454-459
  7. Wang X., Drew C., Lee S.H., Senecal K.J., Kumar J., Samuelson L.A., 2002, “Electrospun Nanofibrous Membranes for Highly Sensitive Optical Sensors”, Nano Letters, 2(11), 1273-1275
  8. Reneker D.H., Yarin A.L., Fong H. and Koombhongse S.J., 2000, “Bending Instability of Electrically Charged Liquid Jets of Polymer Solutions in Electrospinning”, Journal of Applied Physics, 87(9), 4531-4547
  9. Deitzel J.M., Kleinmeyer J., Harris D. and Beck Tan N.C., 2001, “The Effect of Processing Variables on the Morphology of Electrospun Nanofibers and Textiles”, Polymer, 42(1), 261-272
  10. Kirecci A., Özkoç Ü. and İçoğlu H.İ., 2012, “Determination of Optimal Production Parameters for Polyacrylonitrile Nanofibers”, Journal of Applied Polymer Science, 124(6), 4961-4968
  11. Amiraliyan N., Nouri M., Kish, M.H., 2009, “Effects of Some Electrospinning Parameters on Morphology of Natural Silk-Based Nanofibers”, Journal of Applied Polymer Science, 113(1), 226-234
  12. Huang F., Wei Q., Wang J., Cai Y., Huang Y., 2008, “Effect of temperature on Structure, Morphology and Crystallinity of PVDF Nanofibers via Electrospinning”, e-Polymers, 152
  13. De Schoenmaker B., Schueren L.V., Zugle R., Goethals A., Westbroek P., Kiekens P., Nyokong T., Clerck K.D., 2013, “Effect of the Relative Humidity on the Fibre Morphology of Polyamide 4.6 and Polyamide 6.9 Nanofibres”, Journal of Materials Science, 48(4), 1746-1754
  14. Yang Y., Jia Z., Li Q. and Guan Z., 2006, “Experimental Investigation of the Governing Parameters in the Electrospinning of Polyethylene Oxide Solution”, IEEE Transactions on Diel