Journals / Research on Engineering Structures and Materials / 2021 / Cilt: 7 - Sayı: 4

Macro-/micro-mechanical interlocking modification on the performance of hybrid friction stir spot welded aluminum/acrylonitrile butadiene styrene joints

Pages
617–633
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The pre-fabricated threaded-hole friction stir spot welding process is thus recommended for the enhanced micro/macro-interlocking in hybrid Al/polymer joints.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Macro-/micro-mechanical interlocking enhancement of hybrid aluminum/acrylonitrile butadiene styrene (Al/ABS) joint is investigated via the use of joint modification approaches such as pre-fabricated threaded- and unthreaded-hole friction stir spot welding processes.
📊
Key Findings & Data:The tensile-shear failure load of the threaded joint improved from 654 to 749 N as the tool rotational speed is increased from 710 to 1120 rpm.
💡
Conclusion & Impact:The pre-fabricated threaded-hole friction stir spot welding process is thus recommended for the enhanced micro/macro-interlocking in hybrid Al/polymer joints.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Macro-/micro-mechanical interlocking enhancement of hybrid aluminum/acrylonitrile butadiene styrene (Al/ABS) joint is investigated via the use of joint modification approaches such as pre-fabricated threaded- and unthreaded-hole friction stir spot welding processes. The structure, tensileshear failure load, and fracture behavior of the as-welded hybrid Al/ABS joints were investigated. Hybrid Al/ABS joint fabricated with threaded hole shows superior tensile-shear failure load due to the combined effects of compressive shearing-induced and threading-induced mechanical interlocks, and adhesion bonding mechanisms. The tensile-shear failure load of the threaded joint improved from 654 to 749 N as the tool rotational speed is increased from 710 to 1120 rpm. A rise in tool rotational speed improves the failure resistance of the hybrid Al/ABS joints (threaded and unthreaded) owing to the enhanced mechanical interlocking, bigger Al anchor/chip, and smaller interfacial gap between the re-solidified ABS and Al anchor. Threading and tool rotational speed have significant impacts on the fracture location and mode of the hybrid Al/ABS joint. The pre-fabricated threaded-hole friction stir spot welding process is thus recommended for the enhanced micro/macro-interlocking in hybrid Al/polymer joints.

🔖

Cite This Article

OJO, O. O. (2022). Macro-/micro-mechanical interlocking modification on the performance of hybrid friction stir spot welded aluminum/acrylonitrile butadiene styrene joints. Research on Engineering Structures and Materials, Cilt: 7 - Sayı: 4, 617–633. https://ajindex.com/articles/588841

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Patel AR, Kotadiya DJ, Kapopara JM, Dalwadi CG, Patel NP, Rana HG. Investigation of Mechanical Properties for Hybrid Joint of Aluminium to Polymer using Friction Stir Welding (FSW). Materials Today: Proceedings, 2018; 5: 4242–4249.
  2. Ojo OO, Taban E, Kaluc E. Friction stir spot welding of aluminum alloys: A recent review. Materials Testing, 2015; 57: 609 – 627.
  3. Dawei Z, Qi Z, Xiaoguang F, Shengdun Z. Review on Joining Process of Carbon Fiber- Reinforced Polymer and Metal: Methods and Joining Process. Rare Metal Materials and Engineering, 2018; 47(12): 3686-3696. https://doi.org/10.1016/s1875- 5372(19)30018-9 [4] Huang Y, Meng X, Xie Y, Wan L, Lv Z, Cao J, Feng J. Friction stir welding/processing of polymers and polymer matrix composites. Composites Part A: Applied Science and Manufacturing, 2018; 105: 235 – 257.
  4. Kumar R, Singh R, Ahuja IPS, Penna R, Feo L. Weldability of thermoplastic materials for friction stir welding- A state of art review and future applications. Composites Part B, 2018; 137: 1-15.
  5. Huang Y, Meng X, Wang Y, Xie Y, Zhou L. Joining of aluminum alloy and polymer via friction stir lap welding. Journal of Materials Processing Tech., 2018; 257: 148- 154.
  6. Wang H, Yang K, Liu L. The analysis of welding and riveting hybrid bonding joint of aluminum alloy and polyether-ether-ketone composites. Journal of Manufacturing Processes, 2018; 36: 301-308.
  7. Lambiase F, Genna S. Experimental analysis of Laser-assisted joining of Al-Mg aluminum alloy with Polyetheretherketone (PEEK). International Journal of Adhesion and Adhesives, 2018; 84: 265 – 274.
  8. Dalwadi CG, Patel AR, Kapopara JM, Kotadiya DJ, Patel ND, Rana HG. Examination of Mechanical Properties for Dissimilar Friction Stir Welded Joint of Al Alloy (AA-6061) to ABS (Acrylic). Materials Today: Proceedings, 2018; 5: 4761–4765.
  9. Rout A, Pandey P, Oliveira EF, da Silva Autreto PA, Gumaste A, Singh A, Galvao DS, Arora A, Tiwary CS. Atomically locked interfaces of metal (Aluminum) and polymer (Polypropylene) using mechanical friction. Polymer, 2019; 169: 148-153.