SavedAdd your journal

Journals / Politeknik Dergisi / 2020 / Cilt: 23 - Sayı: 2

Scalar Speed Control of Induction Motors with Difference Frequency

Fark Frekans ile İndüksiyon Motorun Skaler Hız Denetimi

Özcan OTKUN
Pages
267–276
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results obtained from the study simulated in Matlabsoftware show that the proposed method can be used in speed control.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Speed monitoring of electric motors has attracted the attention of many researchers from past to present.
📊
Key Findings & Data:This study was conducted to increasethe speed control performance of IM.
💡
Conclusion & Impact:The results obtained from the study simulated in Matlabsoftware show that the proposed method can be used in speed control.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Speed monitoring of electric motors has attracted the attention of many researchers from past to present. Induction Motor (IM),which is one of the electric motor types, falls behind the nominal speed in different loads. This study was conducted to increasethe speed control performance of IM. In the study, speed control of IMs was realized by Difference Frequency (DF). The ScalarControl (SC) method was used in IM speed control. In order to increase the performance of SC, the frequency information receivedfrom IM was compared with the reference frequency. The resulting DF was applied to the system input again. For the performanceanalysis of the study; SC, PI + SC and DF + SC methods were compared. The results obtained from the study simulated in Matlabsoftware show that the proposed method can be used in speed control.

Özet

Elektrik motorlarının hız denetimi geçmişten günümüze pek çok araştırmacının ilgisini çekmiştir. Elektrik motor çeşitlerinden biri olan Indüksiyon Motor (IM) ya da Asenkron Motor (ASM) farklı yüklerde nominal hızın gerisinde kalmaktadır. Bu çalışmada IM’nin hız denetim başarımını arttırmak amacıyla yapılmıştır. Yapılan çalışmada IM’lerin hız denetimi Fark Frekans (FF) ile gerçekleştirilmiştir. IM hız denetiminde Skaler Denetim (SD) yöntemi kullanılmıştır. SD’nin başarımını arttırmak için IM’den alınan frekans bilgisi referans frekans ile karşılaştırılmıştır. Elde edilen FF tekrar sistem girişine uygulanmıştır. Çalışmanın performans analizi için; SD, PI + SD ve FF + SD yöntemleri karşılaştırılmıştır. Analiz sonuçları tablo ve grafikler ile sunulmuştur. Matlab yazılımında benzetimi gerçekleştirilen çalışmadan elde edilen sonuçlar önerilen yöntemin hız denetiminde kullanılabileceğini göstermektedir.

🔖

Cite This Article

OTKUN, Ö. (2022). Scalar Speed Control of Induction Motors with Difference Frequency. Politeknik Dergisi, Cilt: 23 - Sayı: 2, 267–276. https://ajindex.com/articles/588467

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Bose B.K., “Modern Power Electronics and AC Drives”, Upper Saddle River, NJ: Prentice-Hall PTR, (2002)
  2. Kouro S., Bernal R., Miranda H., Silva C.A., and Rodriquez J., ″High-Performance Torque and Flux Control for Multilevel Inverter Fed Induction Motors”, IEEE Transaction on Power Electronics, 22(6): 2116– 2123, (2007)
  3. Wang C.C. and Fang C. H., ″Sensorless Scalar Controlled Induction Motor Drives with Modified Flux Observer”, IEEE Journals & Magazines, 22(8): 61 – 61, (2002)
  4. G. Fouad, ″AC Electric Motors Control Advanced Design Techniques and Applications”, Wiley, New Delhi, India, 2013
  5. Paula S. J., Jeromeb J., Kakania S., ‘Active Rectifier Based Harmonic Compensator for a Direct Torque Controlled Induction Motor Drive’, IETE Journal of Research, 61(6): 573-580, (2015)
  6. Tuncer S., ‘High-Performance Vector Control Strategy For Multilevel Inverter Fed Induction Motor’, Journal of the Faculty of Engineering and Architecture of Gazi University, 30(1), 119-130, (2015)
  7. Zou X., Zhu P., Kang Y. and Chen J., ‘Speed identification for vector control of induction motors with voltage decoupling control principle’, 38th IAS Annual Meeting, Conference Record of the Industry Applications Conference, 12-16 Oct., (2003)
  8. A. Djahbar, B. Mazari, and M. Latroch, ‘Control strategy of three-phase matrix converter fed induction motor drive system’, The IEE Pulsed Power symposium, 8-8 Sept., Basingstoke, UK: IEEE, (2005)
  9. Singh B., Garg V., Bhuvaneshwari G., ‘A 24-pulse ACDC converter employing a pulse doubling technique for vector-controlled induction motor drives’, IETE Journal of Research, 54(4): 314-322, (2008)
  10. Sen P.C., ‘Electric Motor Drives and Control Past Present, and Future’, IEEE Transactions on Industrial Electronics, 37(6): 562-575, (1990)
  11. Ebrahim A., ‘Adaptive nonlinear induction motor control.’ PhD Thesis, The University of Alabama, Alabama, (2007)
  12. Haitham A., Atif I., Jaroslaw G., ‘High Performance Control of AC Drives With Matlab/Simulink Models’, Noida, India: Wiley, (2012)
  13. Bay Ö., Görgünoğlu S. "Design and Implementation of 3- Phase Induction Motors Speed Controller by Using Low Cost 8-Bit Microcontroller". Journal of Polytechnic, 12(3): 143-150, (2009)
  14. Irmak E. and Vadi S., “Asenkron Motorlarda Frekans Değişimi ile Hız Kontrolü Deneyinin Bilgisayar Üzerinden Gerçekleştirilmesi”, Journal of The Faculty of Engineering and Architecture of Gazi University, 21(1): 57-62, (2011)
  15. Ilango G. S.