Journals / Politeknik Dergisi / 2021 / Cilt: 24 - Sayı: 2

Effect of SiC particle size on the microstructural, mechanical and oxidation properties of In-situ synthesized $;HfB_2$ -SiC composites

SiC partikül boyutunun yerinde sentezleme yöntemi ile üretilen $;HfB_2$-SiC kompozitlerinin mikroyapısal, mekanik ve oksidasyon özellikleri üzerine etkisi

Pages
503–510
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

From oxidation test result, the composite with fine SiC particles exhibited more inhomogeneous oxide scales compared to that of coarse SiC containing composite.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In-situ synthesis and densification of hafnium diboride - silicon carbide ($;HfB_2$-SiC) ceramic composites were studied by the spark plasma sintering (SPS) method using $;HfB_2$, B, and SiC as starting powders.
📊
Key Findings & Data:Influence of SiC particle size (∼2 µm and ∼10 µm) on mechanical properties and oxidation resistance of in-situ composites were extensively investigated.
💡
Conclusion & Impact:From oxidation test result, the composite with fine SiC particles exhibited more inhomogeneous oxide scales compared to that of coarse SiC containing composite.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In-situ synthesis and densification of hafnium diboride - silicon carbide ($;HfB_2$-SiC) ceramic composites were studied by the spark plasma sintering (SPS) method using $;HfB_2$, B, and SiC as starting powders. Influence of SiC particle size (∼2 µm and ∼10 µm) on mechanical properties and oxidation resistance of in-situ composites were extensively investigated. According to the achieved results, the highest densification (∼95 % TD) was obtained with fine SiC particle reinforcement. The measured Vickers hardness and fracture toughness of the composites containing fine SiC were 14.3 GPa and 5.42 MPa.m1/2, respectively. The fracture mode changed from transgranular cleavage to a mixed-mode, and the crack deflection was believed to be the primary toughening mechanism. From oxidation test result, the composite with fine SiC particles exhibited more inhomogeneous oxide scales compared to that of coarse SiC containing composite.

Özet

Hafniyum diborür-silisyum karbür ($;HfB_2$-SiC) seramik kompozitlerinin sentezlemesi ve yoğunlaştırılması, başlangıç tozları olarak $;HfB_2$, B ve SiC kullanılarak spark plazma sinterleme (SPS) yöntemi ile incelenmiştir. SiC partikül boyutunun (∼2μm ve ∼10μm) üretilen kompozitlerin mekanik özellikleri ve oksidasyon direncine etkisi kapsamlı olarak araştırılmıştır. Elde edilen sonuçlara göre ince SiC partikül takviyesi ile en yüksek yoğunluk (∼% 95 TY) elde edilmiştir. İnce SiC içeren kompozitlerin ölçülen Vickers sertliği ve kırılma tokluğu sırasıyla 14.3 GPa ve 5.42 MPa.m1/2 olarak hesaplanmıştır. Kırılma türü tane içi halden tane sınırları şekline değişmiş olup, toklaştırma mekanizması olarak çatlak saptırmanın aktif olduğu gözlenmiştir. Oksidasyon testi sonucundan, ince SiC partiküllerine sahip kompozit yapının kaba SiC içeren kompozit yapıya kıyasla homojen olmayan oksit tabakası içerdiği gözlemiştir.

🔖

Cite This Article

GÜRCAN, K., DERİN, B., AYAS, E. (2022). Effect of SiC particle size on the microstructural, mechanical and oxidation properties of In-situ synthesized $;HfB_2$ -SiC composites. Politeknik Dergisi, Cilt: 24 - Sayı: 2, 503–510. https://ajindex.com/articles/588427

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Levine R.S., Opila E., Halbig M., D Kiser J., Singh M., Salem A., “Evaluation of Ultra-High Temperature Ceramics for Aero Propulsion Use”, Journal of the European Ceramic Society, 22: 2757-2767,(2002)
  2. Fahrenholtz W. G., Hilmas G. E., Talmy I. G., Zaykoski J. A., “Refractory Diborides of Zirconium and Hafnium”, Journal of the American Ceramic Society, 90:1347- 1364,(2007)
  3. Akin I., Goller G., “Spark Plasma Sintering of ZirconiaToughened Alumina Composites and Ultra-High Temperature Ceramics Reinforced with Carbon Nanotubes”, “Research and Innovation in Carbon Nanotube-Based Composites”, (2015)
  4. Ni D.W., Zhang G.J., Kan Y.M., Wang P.L., “Synthesis of Monodispersed Fine Hafnium Diboride Powders Using Carbo/Borothermal Reduction of Hafnium Dioxide”, Journal of the American Ceramic Society, 91:2709- 2712,(2008)
  5. Wang H., Lee S. H., Kim H. D., Oh H. C., “Synthesis of Ultrafine Hafnium Diboride Powders Using SolutionBased Processing and Spark Plasma Sintering”, International Journal of Applied Ceramic Technology, 11,(2014)
  6. Brochu M., Gauntt B., Zimmerly T., Ayala A., Loehman R., “Fabrication of UHTCs by Conversion of Dynamically Consolidated Zr+B and Hf+B Powder Mixtures”, Journal of the American Ceramic Society, 91:2815- 2822,(2008)
  7. Ni D.-W., Zhang G.-J., Kan Y.-M., Wang P.-L., “Hot Pressed HfB2 and HfB2–20vol%SiC Ceramics Based on HfB2 Powder Synthesized by Borothermal Reduction of HfO2”, International Journal of Applied Ceramic Technology, 7:830-836,(2010)
  8. Blum Y. D., Marschall J., Hui D., Adair B., Vestel M., “Hafnium Reactivity with Boron and Carbon Sources Under Non-Self-Propagating High-Temperature Synthesis Conditions”, Journal of the American Ceramic Society, 91:1481-1488,(2008)
  9. Zou J., Zhang G.-J., Kan Y.-M., Ohji T., “Pressureless sintering mechanisms and mechanical properties of hafnium diboride ceramics with pre-sintering heat treatment”, Scripta Materialia, 62:159-162,(2010)
  10. Parthasarathy T. A., Rapp R. A., Opeka M., Kerans R. J., “A model for the oxidation of ZrB2, HfB2 and TiB2”, Acta Materialia, 55:5999-6010,(2007)
  11. Monteverde F., Bellosi A., “The resistance to oxidation of an HfB2–SiC composite”, Journal of the European Ceramic Society, 25:1025-1031,(2005)
  12. Monteverde F., “Ultra-high temperature HfB2–SiC ceramics consolidated by hot-pressing and spark plasma sintering”, Journal of Alloys and Compounds, 428:197- 205,(2007)
  13. Fahrenholtz W. G., “Thermodynamic Analysis of ZrB2– SiC Oxidat