Journals / Politeknik Dergisi / 2021 / Cilt: 24 - Sayı: 1

Development of chitosan and polycaprolactone based trilayer biocomposite films for food packaging applications

Gıda Ambalajlama Uygulamaları için Kitosan ve Polikaprolakton Esaslı Üç Katmanlı Biyo-Kompozit Filmlerin Geliştirilmesi

Pages
263–273
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Film samples, including N, presented lower WVP values,whereas higher WVP and water solubility values were obtained with G inclusion (p

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Chitosan (CH) films were obtained by casting method and sandwiched between 2 layers of polycaprolactone (PCL), which wereformed by compression molding, to form trilayers.
📊
Key Findings & Data:CH films were also incorporated with grape seed extract (G) (15%, w/w) and/ornanocellulose (N) (1-5%, w/w).
💡
Conclusion & Impact:Film samples, including N, presented lower WVP values,whereas higher WVP and water solubility values were obtained with G inclusion (p
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Chitosan (CH) films were obtained by casting method and sandwiched between 2 layers of polycaprolactone (PCL), which wereformed by compression molding, to form trilayers. CH films were also incorporated with grape seed extract (G) (15%, w/w) and/ornanocellulose (N) (1-5%, w/w). The tensile properties, transmittance, opacity, water vapor permeability (WVP), antimicrobialactivity, and release behavior of trilayers were determined. The elastic modulus (EM) of trilayer films were not significantlyaffected by the N content, while higher N concentrations resulted in higher tensile strength (TS) values. The incorporation of G ledto higher elongation values and resulted in lower EM and TS values. Film samples, including N, presented lower WVP values,whereas higher WVP and water solubility values were obtained with G inclusion (p

Özet

Kitosan (CH) filmler, dökme yöntemi ile elde edilmiş ve üç katmanlı filmler oluşturmak için pres ile oluşturulan iki polikaprolakton (PCL) film arasında tekrar preslenmiştir. CH filmlere ayrıca üzüm çekirdeği ekstaktı (G) (% 15, ağırlıkça) ve/veya nanoselüloz (N) (% 1-5, ağırlıkça) eklenmiştir. Üç katmanlı filmlerin mekanik özellikleri, transmittans, opaklık, su buharı geçirgenliği (WVP), antimikrobiyal aktivite ve salım davranışları belirlenmiştir. Üç katmanlı filmlerin elastik modülü (EM), N içeriğinden önemli ölçüde etkilenmezken, yüksek N konsantrasyonları, daha yüksek çekme dayanımı (TS) değerleriyle sonuçlanmıştır. G'nin filmlere ilave edilmesi daha yüksek elastikiyet değerlerinin elde edilmesini sağlamıştır ve daha düşük EM ve TS değerleriyle sonuçlanmıştır. N içeren film örnekleri daha düşük WVP değerleri gösterirken, G ilavesi ile birlikte daha yüksek WVP ve suda çözünürlük değerleri elde edilmiştir (p

🔖

Cite This Article

SÖĞÜT, E., SEYDİM, A. C. (2022). Development of chitosan and polycaprolactone based trilayer biocomposite films for food packaging applications. Politeknik Dergisi, Cilt: 24 - Sayı: 1, 263–273. https://ajindex.com/articles/588420

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Khan R. A., Salmieri S., Dussault D., Sharmin N., Lacroix M., Mechanical, Barrier, and Interfacial Properties of Biodegradable Composite Films Made of Methylcellulose and Poly(caprolactone)”, Journal of Applied Polymer Science, 123(3): 1690-1697, (2012)
  2. Bonilla J., Fortunati E., Atarés L., Chiralt A., Kenny J. M., “Physical, structural and antimicrobial properties of poly vinyl alcohol-chitosan biodegradable films”, Food Hydrocolloids, 35: 463–470, (2014)
  3. Kaur, S., Dhillon, G. S., “The versatile biopolymer chitosan: potential sources, evaluation of extraction methods and applications”, Journal of Critical Reviews in Microbiology, 40(2): 155-175, (2014)
  4. Rubilar J. F., Cruz R. M., Silva H. D., Vicente A. A., Khmelinskii I., Vieira M. C., “Physico-mechanical properties of chitosan films with carvacrol and grape seed extract”, Journal of Food Engineering, 115: 466–474, (2013)
  5. Hosseini M. H., Razavi S. H., Mousavi M. A., “Antimicrobial, physical and mechanical properties of chitosan-based films incorporated with thyme, clove and cinnamon essential oils”, Journal of Food Processing and Preservation, 33: 727–743, (2009)
  6. Rubentheren V., Ward T. A., Chee C. Y., Nair P., “Physical and chemical reinforcement of chitosan film using nanocrystalline cellulose and tannic acid”, Cellulose, 22: 2529–2541”, (2015)
  7. Ferreira A. S., Nunes C., Castro A., Ferreira P., Coimbra M. A., “Influence of grape pomace extract incorporation on chitosan films properties”, Carbohydrate Polymers, 113: 490–499, (2014)
  8. Moradi M., Tajik H., Razavi Rohani S. M., Oromiehie A. R., Malekinejad H., Aliakbarlu J., Hadian M., “Characterization of antioxidant chitosan film incorporated with Zataria multiflora Boiss essential oil and grape seed extract”, LWT—Food Science and Technology, 46: 477–484, (2012)
  9. Suppakul P., Miltz J., Sonneveld K., Bigger S. W., “Active Packaging Technologies with an Emphasis on Antimicrobial Packaging and its Applications”, Journal of Food Science, 68: 408-420, (2003)
  10. Boumail A., Salmieri S., Klimas E., Tawema P.O., Bouchard J., Lacroix M., “Characterization of Trilayer Antimicrobial Diffusion Films (ADFs) Based on Methylcellulose−Polycaprolactone Composites”, Journal of Agricultural and Food Chemistry, 61: 811−821, (2013)
  11. Azevedo V. M., Dias M. V., Borges S. V., Costa A. L. R., Silva E. K., Medeiros É. A. A., Soares N. de F. F., “Development of whey protein isolate bionanocomposites: Effect of montmorillonite and citri