Journals / Politeknik Dergisi / 2021 / Cilt: 24 - Sayı: 2

Optimization and finite element modelling of tool wear in milling of Inconel 625 superalloy

Inconel 625 Alaşımının Frezelenmesinde Takım Aşınmasının Sonlu Elemanlar Yöntemiyle Modellenmesi ve Optimizasyonu

Pages
391–400
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showedthat the feed rate (with 41.5% contribution rate) is the most important parameter affecting Vb.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study focuses on optimization of cutting conditions and numerical analysis of flank wear in milling of Inconel 625 superalloyusing PVD AlTiN and CVD TiCN/Al2O3/TiN-coated carbide inserts.
📊
Key Findings & Data:The milling experiments have been performed in CNCvertical machining centre according to Taguchi L18 orthogonal array.
💡
Conclusion & Impact:The results showedthat the feed rate (with 41.5% contribution rate) is the most important parameter affecting Vb.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

This study focuses on optimization of cutting conditions and numerical analysis of flank wear in milling of Inconel 625 superalloyusing PVD AlTiN and CVD TiCN/Al2O3/TiN-coated carbide inserts. The milling experiments have been performed in CNCvertical machining centre according to Taguchi L18 orthogonal array. Finite element modelling of tool wear was performed usingDeform 3D software. Analysis of variance was utilized to define the influences of the milling conditions on Vb. The results showedthat the feed rate (with 41.5% contribution rate) is the most important parameter affecting Vb. The linear and quadratic regressionanalyses were used to estimate the results of the test. The regression analysis results showed that the estimated Vb values achievedby the quadratic regression model were more effective compared to the linear regression model. Statistical results revealed that theTaguchi method was successful to define optimum cutting parameters in the milling of Inconel 625.

Özet

Bu çalışma, PVD AlTiN ve CVD TiCN/Al2O3/TiN kaplı karbür uçlar kullanılarak Inconel 625 süper alaşımının frezelenmesinde kesme parametrelerinin optimizasyonuna ve yanak aşınmasının sayısal analizine odaklanmaktadır. Frezeleme deneyleri Taguchi L18 dikey dizinine göre CNC dikey işleme merkezinde gerçekleştirildi.Takım aşınmasının sonlu eleman yöntemiyle modellemesi Deform 3D yazılımı kullanılarak yapıldı. Takım aşınması üzerinde frezeleme şartlarının etkilerini tanımlamak için varyans analizi kullanılmıştır. Varyans analiz sonuçları, ilerleme miktarının (%41.5 katkı oranı ile) Vb'yi etkileyen en önemli parametre olduğunu göstermiştir. Test sonuçlarını tahmin etmek için lineer ve kuadratik regresyon analizleri kullanıldı. Regresyon analizi sonuçları, kuadratik regresyon modeli ile elde edilen tahmini Vb değerlerinin lineer regresyon modeline göre daha etkili olduğunu göstermektedir. İstatistiksel sonuçlar, Taguchi yönteminin Inconel 625 alaşımının frezelenmesinde optimum kesme parametrelerinin belirlenmesinde başarılı olduğunu göstermektedir.

🔖

Cite This Article

AKGÜN, M., DEMİR, H. (2022). Optimization and finite element modelling of tool wear in milling of Inconel 625 superalloy. Politeknik Dergisi, Cilt: 24 - Sayı: 2, 391–400. https://ajindex.com/articles/588397

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. İnternet: https://www.kennametal.com/content/dam/kennametal/k ennametal/common/Resources/CatalogsLiterature/Metal working/SuperAlloys_material_machining_guide_Aeros pace.pdf
  2. Wang Z., Guan K., Gao M., “The microstructure and mechanical properties of deposited-IN718 by selective laser melting”, Journal of Alloys and Compounds, 513:518–523, (2012). [3]. Jindal P., Santhanam A., Schleinkofer U., Shuster A., “Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning”, International Journal of Refractory Metals and Hard Materials, 17: 163–170, (1999)
  3. Sokovic M., Kopac J., Dobrzanski L. A., Mikula J., Golombek K., Pakula D., “Cutting Characteristics of PVD and CVD - Coated Ceramic Tool Inserts”, Tribology in Industry, 28:3–8, (2006)
  4. Kıvak T., “Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts”, Measurement, 50: 19–28, (2014)
  5. Horng J. T., Liu N. M., Chiang K. T., “Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3/TiC mixed ceramic tool based on the response surface methodology”, Journal of Materials Processing Technology, 208: 532–541, (2008)
  6. Chethan Y. D., Ravindra H. V., Krishnegowda Y. T., “Optimization of machining parameters in turning Nimonic-75 using machine vision and acoustic emission signals by Taguchi technique”, Measurement, 144: 144– 154, (2019)
  7. Akgün M., Demir H., Çiftçi İ., “Optimization of Surface Roughness in Turning Mg2Si Particle Reinforced Magnesium”, Journal of Polytechnic, 21(3): 645-650, (2018)
  8. Yan H., Hua J., Shivpuri R., “Flow stress of AISI H13 die steel in hard machining”, Materials & Design, 28: 272– 277, (2007)
  9. Kalyon A., Günay M., Özyürek D., “Application of grey relational analysis based on Taguchi method for optimizing machining parameters in hard turning of high chrome cast iron”, Advances in Manufacturing, 6: 419– 429, (2018)
  10. Ulas H. B., Ozkan M. T.,“Turning processes investigation of materials austenitic, martensitic and duplex stainless steels and prediction of cutting forces using artificial neural network (ANN) techniques”, Indian Journal of Engineering and Materials Sciences (IJEMS), 26: 93- 104, (2019)
  11. Özlü B., Akgün M., Demir H., “Analysis and Optimization of Effects on Surface Roughness of Cutting Parameters on Turning of AA6061 Alloy”, Gazi Mühendislik Bilimleri Dergisi, 5: 151–158, (2019)
  12. Demir H., Gündüz S., Er