Journals / Bilimsel Madencilik Dergisi / 2007 / Cilt: 46 - Sayı: 2

Investigation of Diggability and Rippability Classification Systems and Proposition of a New Classification System

KAZILABİLİRLİK VE RİPERLENEBİLİRLİK SINIFLAMA SİSTEMLERİNİN İNCELENMESİ VE YENİ BİR SINIFLAMA SİSTEMİNİN ÖNERİLMESİ

Pages
13–26
Publication Date
2007-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the light of this investigation and evaluations, a new classification system was proposed.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Within the scope of this study, initially the parameters effect the digging design had been explained and a literature survey had been conducted on diggability and rippability classification systems.
📊
Key Findings & Data:The parameters used in these classification systems and their usage frequencies and weights had been investigated.
💡
Conclusion & Impact:In the light of this investigation and evaluations, a new classification system was proposed.
🔬Design:Survey & Empirical Study
📍Scope:Comprehensive Sample
⚙️Variables:Kaya Kütle ve Malzeme Özellikleri · Kazılabilirlik ve Riperlenebilirlik Sınıflama Sistemleri · Rock Mass and Material Properties

Abstract

Within the scope of this study, initially the parameters effect the digging design had been explained and a literature survey had been conducted on diggability and rippability classification systems. The parameters used in these classification systems and their usage frequencies and weights had been investigated. Then, these classification systems had been evaluated by considering the mass and material properties of different rock units. In the light of this investigation and evaluations, a new classification system was proposed.

Özet

Bu çalışma kapsamında, öncelikle kazı tasarımı üzerinde etkili olan parametreler açıklanmış ve kazılabilirlik/riperlenebilirlik sınıflama sistemleri ile ilgili literatür araştırması yapılmıştır. Bu sınıflama sistemlerinde kullanılan parametreler, parametrelerin kullanım sıklıkları ve ağırlıkları incelenmiştir. Daha sonra, mevcut sınıflama sistemleri değişik kaya birimlerine ait kütle ve malzeme özellikleri dikkate alınarak değerlendirilmiştir. Bu inceleme ve değerlendirmeler ışığında, yeni bir sınıflama sistemi önerilmiştir.

🔖

Cite This Article

CEYLANOĞLU, A., GÜL, Y., AKIN, A. (2007). Investigation of Diggability and Rippability Classification Systems and Proposition of a New Classification System. Bilimsel Madencilik Dergisi, Cilt: 46 - Sayı: 2, 13–26. https://ajindex.com/articles/58702

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...