Journals / Bilimsel Madencilik Dergisi / 2016 / Cilt: 55 - Sayı: 1

THE USE OF TERRESTRIAL LASER SCANNING (LiDAR) FOR THE ANALYSIS OF BLASTING RESULTS

PATLATMA SONUÇLARININ ANALİZİNDE YERSEL LAZER TARAYICILARIN (LiDAR) KULLANIMI

Pages
35–44
Publication Date
2016-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is concluded that LiDAR technology can be used effectively in the determination of the size distribution of the piles for evaluating the blasting results

📌 3 Key Takeaways

🎯
Objective & Hypothesis:An important efficiency criterion of the blasting operations in mine production is the degree of fragmentation.
📊
Key Findings & Data:Different methods have been used to determine the fragmentation up to the present, however some difficulties such as measurement error and long operation times were encountered.
💡
Conclusion & Impact:It is concluded that LiDAR technology can be used effectively in the determination of the size distribution of the piles for evaluating the blasting results
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:LiDAR · Yersel Lazer Tarama · Parça Boyutu

Abstract

An important efficiency criterion of the blasting operations in mine production is the degree of fragmentation. Different methods have been used to determine the fragmentation up to the present, however some difficulties such as measurement error and long operation times were encountered. In the study, size distribution analysis using terrestrial laser scanning technology (LiDAR) was firstly applied to laboratory scaled broken rock pile, and then, the method was applied to aggregate pile and blasted rock pile in a quarry. Particle size analysis process contains; obtaining point cloud data of the piles using terrestrial laser scanner, creating three-dimensional computer models of the piles through the various filters and related software, defining the fragments and determining the particle size distribution. It is concluded that LiDAR technology can be used effectively in the determination of the size distribution of the piles for evaluating the blasting results

Özet

Madencilik amaçlı patlatma uygulamalarında verimliliğin önemli bir ölçütü patlatma sonrası sağlanan parçalanmanın derecesidir. Patlatma sonrası parçalanmanın tespit edilmesi amacıyla günümüze kadar farklı yöntemler kullanılmış ve bu yöntemlerde, ölçüm hataları, uzun işlem süreleri gibi çeşitli sorunlarla karşılaşılmıştır. Bu çalışmada, LiDAR teknolojisi kullanılarak, öncelikle laboratuvar ölçekli yığın üzerinde, daha sonra bir taş ocağında, kırılmış agrega yığını ve patlatma sonrası oluşan yığın üzerinde parça boyutu dağılımı analizi gerçekleştirilmiştir. Tane boyu analizi; yığından yersel lazer tarayıcı yardımıyla nokta bulutu verilerinin alınması, bu verilerle yığının üç boyutlu modelinin bilgisayar ortamında oluşturulması, geliştirilen bir algoritma ile yığını oluşturan parçaların tanımlanması ve boyut dağılımlarının belirlenmesini içermektedir. LiDAR teknolojisinin patlatma sonuçlarının analizinde etkin bir şekilde kullanılabileceği sonucuna varılmıştır

🔖

Cite This Article

ENGİN, İ. C., MAERZ, N. (2016). THE USE OF TERRESTRIAL LASER SCANNING (LiDAR) FOR THE ANALYSIS OF BLASTING RESULTS. Bilimsel Madencilik Dergisi, Cilt: 55 - Sayı: 1, 35–44. https://ajindex.com/articles/58590

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Abellán A., Vilaplana J.M., Martínez J., 2008. Application of a long-range terrestrial laser scanner to a detailed rockfall study at Vall de Nşria (Eastern pyrenees, Spain), Eng Geol 88, 136-148.
  2. Aksoy, H., Ercanoglu, M., 2006. Determination of the rockfall source in an urban settle-ment area by using a rule-based fuzzy evaluation. Natural Hazards and Earth System 6, 941-954.
  3. Bauer A., Paar G., Kaltenböck A., 2005. Mass movement monitoring using terrestrial laser scanner for rock fall management. In: Proc first international symposium on geo-information for disaster management, 393-406. Decker J., 2008. Laser scanning techniques in Devil's Slide tunnels. In: Proceedings of the 42nd US rock mechanics symposium, San Francisco. Deliormanlı A.H., Maerz N., Otoo J.N.A., 2014. Using terrestrial 3D laser scanning and optical methods to determine orientations of discontinuities at a granite quarry, International Journal of Rock Mechanics and Mining Sciences, 66, 41-48.
  4. Fekete S., Diederichs M., 2013. Integration of three- dimensional laser scanning with discontinuum modelling for stability analysis of tunnels in blocky rock masses. International Journal of Rock Mechanics & Mining Sciences 57, 11-23.
  5. Feng, Q.H., Röshoff, K., 2004. In-situ mapping and documentation of rock faces using full-coverage 3D laser scanning techniques. International Journal of Rock Mechanics and Mining 41, 379. Gümüş K., 2008. Yersel Lazer Tarayıcılar Ve Konum Doğruluklarının Araştırılması, Yüksek Lisans Tezi, Yıldız Teknik Üniversitesi Fen Bilimleri Enstitüsü, İstanbul, 134 s. Ingensand H., 2006. Methodological aspects in terrestrial laser-scanning technology. InProceedings of the 3rd IAG Symposium of Geodesy for Geotechnical and Structural Engineeringand 12th FIG Symposium on Deformation Measurements. Kemeny, J., Turner, K., and Norton, B. 2006. LiDAR for Rock Mass Characterization: hardware, software, accuracy, and best practices. Laser and Photogrammetric Methods for Rock Face Characterization workshop, Golden Colorado, June 17-18, 2006, pp. 49-62.
  6. Lato M., Kemeny J., Harrap R.M., Bevan G., 2013. Rock bench: Establishing a common repository and standards for assessing rockmass characteristics using LiDAR and photogrammetry. Computers & Geosciences 50, 106-114.
  7. Maerz, N. H., Youssef, A. M., Otoo, J. N., Kassebaum, T. J., and Duan, Y. 2012. A simple method for measuring discontinuity orientations from terrestrial LiDAR images. Sub. to J. of Environmental and Engineering Geoscience. Feb. 2