SavedAdd your journal

Journals / Bilimsel Madencilik Dergisi / 2017 / Cilt: 56 - Sayı: 4

TECHNOLOGICAL CHARACTERIZATION AND COMPARISON OF TWO CERAMIC CLAYS USED FOR MANUFACTURING OF TRADITIONAL CERAMIC PRODUCTS IN TURKEY

TÜRKİYE’DE GELENEKSEL SERAMİK ÜRÜNLERİN İMALATINDA KULLANILAN İKİ SERAMİK KİLİNİN TEKNOLOJİK TANIMLAMASI VE KARŞILAŞTIRILMASI

Haluk ÇELİK
Pages
137–147
Publication Date
2017-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

On the evaluation of drying sensitivity of two ceramic muds, it was concluded that the KC has the less Drying Sensitivity Index (DSI) (0.75) value than the MC (0.84).

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the present investigation, two different clay samples from the region of Menemen (İzmir) and the region of Kınık (Bilecik) were characterized by mineralogical, chemical and thermal analyses and different technological tests.
📊
Key Findings & Data:The MC contains about 50% clay minerals and 35.71% quartz whereas the KC has about 41% clay minerals and 50% quartz.
💡
Conclusion & Impact:On the evaluation of drying sensitivity of two ceramic muds, it was concluded that the KC has the less Drying Sensitivity Index (DSI) (0.75) value than the MC (0.84).
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kil · Seramik · Seramik çamuru

Abstract

In the present investigation, two different clay samples from the region of Menemen (İzmir) and the region of Kınık (Bilecik) were characterized by mineralogical, chemical and thermal analyses and different technological tests. The drying sensitivity of the clay bodies was also studied bydetermining Drying Sensitivity Index. The results revealed that the Menemen Clay (MC) composed of kaolinite and muscovite clay minerals whereas Kınık Clay (KC) consists mostly of clinochlore and muscovite. The MC contains about 50% clay minerals and 35.71% quartz whereas the KC has about 41% clay minerals and 50% quartz. As a result of this composition, the firing shrinkage and total shrinkage values of the MC were higher than that of the KC. On the other hand, the KC presents a higher value of plasticity index (PI) than the MC. On the evaluation of drying sensitivity of two ceramic muds, it was concluded that the KC has the less Drying Sensitivity Index (DSI) (0.75) value than the MC (0.84).

Özet

Bu çalışmada, Menemen (İzmir) ve Kınık (Bilecik) bölgelerinden alınan iki farklı kil numunesinin mineralojik, kimyasal, ısıl ve teknolojik özellikleri belirlenerek tanımlaması yapılmıştır. Kil bünyelerinin kuruma hassasiyeti Kuruma Hassasiyeti İndeksi belirlenmek suretiyle çalışılmıştır. Sonuçlara göre Menemen Kili (MC) kaolinit ve muskovit minerallerinden oluşmakta iken, Kınık Kili (KC) çoğunlukla klinoklor ve muskovit içermektedir. MC %50 kil mineralleri ve %35.71 kuvars içerirken, KC %41 kil mineralleri ve %50 kuvars içeriğine sahiptir. Bunun bir sonucu olarak MC’nin pişirme küçülmesi ve toplam küçülme değerleri KC’den daha yüksek çıkmıştır. Diğer taraftan KC’nin plastisite indeksi (PI) MC’den daha yüksektir. İki seramik çamurunun kuruma hassasiyetlerinin değerlendirilmesi neticesinde KC’nin (0.75) MC’den (0.84) daha düşük Kuruma Hassasiyeti İndeksi (DSI) değerine sahip olduğu sonucuna ulaşılmıştır.

🔖

Cite This Article

ÇELİK, H. (2017). TECHNOLOGICAL CHARACTERIZATION AND COMPARISON OF TWO CERAMIC CLAYS USED FOR MANUFACTURING OF TRADITIONAL CERAMIC PRODUCTS IN TURKEY. Bilimsel Madencilik Dergisi, Cilt: 56 - Sayı: 4, 137–147. https://ajindex.com/articles/58567

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Ancey, C., 2007. Plasticity and Geophysical Flows: A Review. Journal of Non-Newtonian Fluid Mechanics 142 (1-3), 4-35.
  2. Atanasov, A., 2005. Drying Properties of a Ceramic Mass Resistible to Aggressive Environment. Journal of the University of Chemical Technology and Metallurgy, 40 (4), 311-314.
  3. Aungatichart, P., Wada, S. 2009. Correlation Between Bigot and Ratzenberger Drying Sensitivity Indices of Red Clay from Ratchaburi Province (Thailand). Applied Clay Science, 43, 182-185.
  4. Baccour, H., Medhioub, M., Jamoussi, F., Mhiri, T., Daoud, A., 2008. Mineralogical Evaluation and Industrial Applications of the Triassic Clay Deposits, Southern Tunisia. Materials Characterization, 59, 1613-1622.
  5. Baccour, H., Medhioub, M., Jamoussi, F.Mhiri, T., 2009. Influence of Firing Temperature on the Ceramic Properties of Triassic Clays from Tunisia. J. Materials Processing Technology, 209 (6), 2812-2817.
  6. Bergaya, F., Lagaly, G., 2006. General Introduction: Clays, Clay Minerals and Clay Science, in Handbook of Clay Science edited by F. Bergaya, B.K.G. Theng, G. Lagaly, Published by Elsevier, p.5-6.
  7. Can, M.M., Ozcan, S., Ceylan, A., Firat, T., 2010. Effect of Milling Time on the Synthesis of Magnetite Nanoparticles by Wet Milling. Materials Science and Engineering B. 172, 72-75.
  8. Carretero, M.I., Dondi, M., Fabbri, B., Raimondo, M., 2002. The Influence of Shaping and Firing Technology on Ceramic Properties of Calcareous and NonCalcareous Illitic-Chloritic Clays. Applied Clay Science, 20, 301- 306. Casagrande, A., 1947. Plasticity Chart for the Classification of Cohesive Soils. Trans. Am. Soc. Civ. Eng. 783-811.
  9. Celik, H., 2010. Technological Characterization and Industrial Application of Two Turkish Clays for the Ceramic Industry. Applied Clay Science, 50, 245-254.
  10. Celik, H., 2015. Recycling of Boron Waste to Develop Ceramic Wall Tile in Turkey. Transactions of The Indian Ceramic Society, 74 (2), 108-116.
  11. Colak, M., Aksu, G., 2001. Ceramic Raw Materials of Menemen (İzmir) Their Mineralogical and Chemical Properties. Proceedings Book of 10th National Clay Symposium, Konya, 228-234 (in Turkish). Diels, K., Jaeckel, R., 2013. Leybold Vacuum Handbook. Published by Pergamon Press Ltd., p.185. Fisher, P., 1984. Some Comments on the Color of Fired Clays. Ziegelindustrie International, 37, 475-483.
  12. Ford, R.W., 1986.
  13. Ceramics Drying. First ed. Pergamon, Oxford. Harvey, C.C., Murray, H.H. 2006. Clays: An Overview, in Industrial Minerals & Rocks: Commodities, Markets, and Uses 7th ed., edi