SavedAdd your journal

Journals / Mühendislik Bilimleri ve Tasarım Dergisi / 2019 / Cilt: 7 - Sayı: 1

CHARACTERIZATION AND EVALUTION OF REMOVAL CONDITIONS OF LEAD-ZINC-COPPER FLOTATION PLANT WASTE

KURŞUN-ÇİNKO-BAKIR İYİLEŞTİRME TESİSİ ATIĞININ KARAKTERİZASYON VE GİDERİM ŞARTLARININ DEĞERLENDİRİLMESİ

Emine SAYILGAN
Gözde KARACAN
Pages
175–181
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Experimental studies showed that about 30% iron and 85% sulphate removal yields were obtained with 4 M HCl concentration.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A large amount of mining waste occures due to the intensive mining activities in our country.
📊
Key Findings & Data:The lead-zinc-copper flotation waste was investigated in this study contains significantly calcium, iron, magnesium and sulfur elements.
💡
Conclusion & Impact:Experimental studies showed that about 30% iron and 85% sulphate removal yields were obtained with 4 M HCl concentration.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Maden atığı · Karakterizasyon · Demir

Abstract

A large amount of mining waste occures due to the intensive mining activities in our country. These wastes may contain different pollutants depending on the type of mining facilities. The lead-zinc-copper flotation waste was investigated in this study contains significantly calcium, iron, magnesium and sulfur elements. The presence of high concentrations of these elements has an environmental problem. For this reason, in this article, firstly, the mine waste was obtained from the Gümüştaş Mining Corporation, the Lead-Zinc-Copper Enhancement Plant. Then, characterization and iron and sulphate removal experiments were investigated under different inorganic acids. Experimental studies showed that about 30% iron and 85% sulphate removal yields were obtained with 4 M HCl concentration.

Özet

Ülkemizde yoğun madencilik çalışmaları neticesinde, fazla miktarda madencilik atığı ortaya çıkmaktadır. Bu atıklar, işletilen maden işletmesinin türüne göre farklı kirleticiler içerebilmektedir. Bu çalışma kapsamında araştırılmış olan kurşun-çinko-bakır flotasyon atığı önemli ölçüde kalsiyum, demir, magnezyum ve sülfür elementlerini içermektedir. Bu elementlerin yüksek konsantrasyonda bulunması çevresel açıdan tehdit oluşturmaktadır. Bu sebeple, bu makalede, Gümüştaş Madencilik İşletmesi, Kurşun-Çinko-Bakır İyileştirme Tesisi’nden temin edilen maden atığının karakterizasyonu neticesinde farklı inorganik asitlerle demir ve sülfat elementlerinin giderimleri değerlendirilmiştir. Deneysel çalışmalar neticesinde 4 M HCl konsantrasyonunda yaklaşık olarak %30 demir, %85 sülfat giderimi elde edilmiştir.

🔖

Cite This Article

SAYILGAN, E., KARACAN, G. (2022). CHARACTERIZATION AND EVALUTION OF REMOVAL CONDITIONS OF LEAD-ZINC-COPPER FLOTATION PLANT WASTE. Mühendislik Bilimleri ve Tasarım Dergisi, Cilt: 7 - Sayı: 1, 175–181. https://ajindex.com/articles/583686

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Ahmedna, M., Marshall, W.E.,Husseiny, A.A., Rao, R.M., & I. Goktepe, 2004. The use of nutshell carbons in drinking water filters for removal of trace metals, Water Res., 38, 1062-1068. Doi:10.1016/j.watres.2003.10.047 Al Aji, B., Yavuz, Y., & Koparal, A.S., 2012. Electrocoagulation of heavy metals containing model wastewater using monopolar iron electrodes, Separation and Purification Technology, 86, 248–254. https://doi.org/10.1016/j.seppur.2011.11.011 APHA, 2005. Standard Methods for the Examination of Water and Wastewater, 21st Ed., APHA, AWWA, WEF, Washington, DC. https://www.standardmethods.org Chuah,T.G. Jumasiah, A., Azni, I., Katayon, S., & Choong, S.Y.T., 2005. Rice husk as a potentially low-cost biosorbent for heavy metal and dye removal: an overview, Desalination, 175, 305-316. Doi:10.1016/j.desal.2004.10.014 Falagan, C., Grail, B.M,. & Johnson, D.B., 2017. New approaches for extracting and recovering metals from mine tailings, Minerals Engineering, 106, 71-78. https://doi.org/10.1016/j.mineng.2016.10.008
  2. Forjan, R., Asensio, V., Rodriguez-Vila, A. & Covelo, E.F. 2014. Effect of amendmends made of waste materials in the physical and chemical recovery of mine soil. Journal of Geochemical Exploration, 147, 91-97. https://doi.org/10.1016/j.gexplo.2014.10.004
  3. Fosso-Kankeu, E., Waanders, F., & W. Botes, W. 2015. Recovery of base metals from mine tailings dumps collected in the vicinity of Potchefstroom: leaching assisted by complexing agent. 7th International Conference on Latest Trends in Engineering & Technology (ICLTET’2015), Nov.26-27,
  4. Irene, Pretoria, South Africa. Gaber, S.E., Rizk, M.S., & Yehia, M.M., 2011. Extraction of certain heavy metals from sewage sludge using different types of acids. Biokemistri, 23, 41-48. https://www.ajol.info/index.php/biokem/article/view/77670
  5. Ghirişan, A.L., Drăgan, S., Pop, A., Simihăian, M., & Miclăuş, V., 2007. Heavy metal removal and neutralization of acid mine waste water - kinetic study. The Canadian Journal of Chemical Engineering, 85, 900-905. https://doi.org/10.1002/cjce.5450850611
  6. Jafaripour, A., Rowson, N.A., & Ghataora, G.S., 2015. Utilisation of residue gas sludge (BOS sludge) for removal of heavy metals from acid mine drainage (AMD), International Journal of Mineral Processing, 144, 90–96. https://doi.org/10.1016/j.minpro.2015.10.002
  7. Kachhap, S., 2009. Waste management in mining and allied industries, Bachelor of Technology degree in MiningEngineering, National Institute of Technology, Rourkela, Dee