Journals / Mugla Journal of Science and Technology / 2022 / Cilt: 8 - Sayı: 1

PREPARATION OF YB-DOPED SRCEO3 SPUTTER TARGETS FOR PROTONIC SOLID OXIDE FUEL CELLS

Pages
1–7
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

A relative density of 0.95 was achieved in SrCe0.95Yb0.05O3-δ targets as a result of the procedure in question without the use of a sintering aid.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A comprehensive study was carried out starting from powder synthesis to sintering procedure in order to produce a phase-pure SrCe0.95Yb0.05O3-δ sputter target.
📊
Key Findings & Data:In the powder synthesis, the effect of chelating and polymerization agents on the formation of single-phase SrCe0.95Yb0.05O3-δ was investigated in detail.
💡
Conclusion & Impact:A relative density of 0.95 was achieved in SrCe0.95Yb0.05O3-δ targets as a result of the procedure in question without the use of a sintering aid.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Yb-doped SrCeO3 · Deformable compaction die · Sintering

Abstract

A comprehensive study was carried out starting from powder synthesis to sintering procedure in order to produce a phase-pure SrCe0.95Yb0.05O3-δ sputter target. In the powder synthesis, the effect of chelating and polymerization agents on the formation of single-phase SrCe0.95Yb0.05O3-δ was investigated in detail. In this regard, citric acid, EDTA, and their combinations in different ratios were evaluated as chelating agents. The calcination temperature, ranging from 1000 °C to 1300 °C, was also investigated to reveal its effect on the formation of possible secondary phases. Following the powder synthesis, SrCe0.95Yb0.05O3-δ sputter target with dimensions of ~50 mm diameter and ~3 mm thickness was produced by powder pressing with deformable compaction die and the subsequent sintering at 1300 °C for 10 hours. A relative density of 0.95 was achieved in SrCe0.95Yb0.05O3-δ targets as a result of the procedure in question without the use of a sintering aid.

🔖

Cite This Article

PİŞKİN, F. (2022). PREPARATION OF YB-DOPED SRCEO3 SPUTTER TARGETS FOR PROTONIC SOLID OXIDE FUEL CELLS. Mugla Journal of Science and Technology, Cilt: 8 - Sayı: 1, 1–7. https://ajindex.com/articles/581852

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Vøllestad, E., Strandbakke, R., Tarach, M., Catalán-Martínez, D., Fontaine, M.-L., Beeaff, D., Clark, D. R., Serra, J. M., and Norby, T., “Mixed proton and electron conducting double perovskite anodes for stable and efficient tubular proton ceramic electrolysers,” Nature Materials, vol. 18, no. 7, pp. 752–759, 2019.
  2. Choi, S., Davenport, T. C., and Haile, S. M., “Protonic ceramic electrochemical cells for hydrogen production and electricity generation: exceptional reversibility, stability, and demonstrated faradaic efficiency,” Energy & Environmental Science, vol. 12, no. 1, pp. 206–215, 2019.
  3. Hashim, S. S., Somalu, M. R., Loh, K. S., Liu, S., Zhou, W., and Sunarso, J., “Perovskite-based proton conducting membranes for hydrogen separation: A review,” International Journal of Hydrogen Energy, vol. 43, no. 32, pp. 15281–15305, 2018.
  4. Wang, H., Wang, X., Meng, B., Tan, X., Loh, K. S., Sunarso, J., and Liu, S., “Perovskite-based mixed protonic–electronic conducting membranes for hydrogen separation: Recent status and advances,” Journal of Industrial and Engineering Chemistry, vol. 60, pp. 297–306, 2018.
  5. Wei, Z., Wang, J., Yu, X., Li, Z., Zhao, Y., and Chai, J., “Study on Ce and Y co-doped BaFeO3-δ cubic perovskite as free-cobalt cathode for proton-conducting solid oxide fuel cells,” International Journal of Hydrogen Energy, vol. 46, no. 46, pp. 23868–23878, 2021.
  6. Cao, Y., Dhahad, H. A., Sun, Y.-L., Abdollahi Haghghi, M., Delpisheh, M., Athari, H., and Farouk, N., “The role of input gas species to the cathode in the oxygen-ion conducting and proton conducting solid oxide fuel cells and their applications: Comparative 4E analysis,” International Journal of Hydrogen Energy, vol. 46, no. 37, pp. 19569–19589, 2021.
  7. An, H., Lee, H.-W., Kim, B.-K., Son, J.-W., Yoon, K. J., Kim, H., Shin, D., Ji, H.-I., and Lee, J.-H., “A 5 × 5 cm2 protonic ceramic fuel cell with a power density of 1.3 W cm–2 at 600 °C,” Nature Energy, vol. 3, no. 10, pp. 870–875, 2018.
  8. Okuyama, Y., Okuyama, K., Mizutani, Y., Sakai, T., Lee, Y. S., and Matsumoto, H., “Proton transport properties of La0.9Sr0.1Yb0.8In0.2O3−δ and its application to proton ceramic fuel cell,” International Journal of Hydrogen Energy, vol. 39, no. 35, pp. 20829–20836, 2014.
  9. Souza, E. C. C. de and Muccillo, R., “Properties and applications of perovskite proton conductors,” Materials Research, vol. 13, no. 3, pp. 385–394, 2010.
  10. Mather, G. C., Poulidi, D., Thursfield, A., Pascual, M. J., Jurado, J. R., and Metcalfe, I. S., “Hyd