Journals / Metalurji / 1999 / Cilt: 23 - Sayı: 119

High strain rate deformation behavior of metal matrix composites

Metal matrisli kompozitlerin yüksek deformasyon hızlarında davranışları

Journal
Metalurji
Pages
20–28
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that reinforcement size and orientation, matrix alloy type and heat treatment had affected strain rate dependent flow stress behavior of the the tested metal matrix composites.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Discontinuous fiber reinforced Aluminum Metal Matrix Composites have been compression tested at quasi-static and high strain rates.
📊
Key Findings & Data:Quasi-static $(10^{-3}/s)$ compression tests were conducted using an instron machine.
💡
Conclusion & Impact:It was found that reinforcement size and orientation, matrix alloy type and heat treatment had affected strain rate dependent flow stress behavior of the the tested metal matrix composites.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Discontinuous fiber reinforced Aluminum Metal Matrix Composites have been compression tested at quasi-static and high strain rates. Quasi-static $(10^{-3}/s)$ compression tests were conducted using an instron machine. Split Hopkinson Pressure Bar technique was used to test composites at strain rates higher than 100/s. Tested composites were paniculate, whisker and short fiber reinforced and contained different aluminum matrix alloys. In order to investigate effect of reinforcement on the strain rate dependent flow stress, unreinforced matrix alloys of the composites were also tested at similar strain rate regimes. It was found that reinforcement size and orientation, matrix alloy type and heat treatment had affected strain rate dependent flow stress behavior of the the tested metal matrix composites.

Özet

Süreksiz katkılarla kuvvetlendirilmiş Alüminyum Metal Matris Kompozit'lere düşük ve yüksek deformasyon hızlarında basma deneyleri uygulanmıştır. Düşük hızlarda $(10^{-3}/s)$ basma deneyleri instron makinası ile yapılmıştır. Split Hopkinson Pressure Bar tekniği yüksek hızlarda (>100 /s) basma deneylerinde kullanılmıştır. Parçacık, whisker ve kısa fiberlerle kuvvetlendirilmiş farklı matris (alüminyum) alaşımlı kompozitler test edilmiştir. Kuvvetlendiricinin deformasyon hızına bağlı gerilmeye etkilerini araştırmak için kompozitlerin kuvvetlendirilmemiş matris alaşımlarıda benzer deformasyon hızlarında test edilmiştir. Kuvvetlendiricinin boyutu ve dağılımının, matris alaşımı ve uygulanan ısıl işlemin test edilen kompozitlerde deformasyon hızına bağlı gerilmeleri etkilediği bulunmuştur.

🔖

Cite This Article

GÜDEN, M., HALL, I. W. (2022). High strain rate deformation behavior of metal matrix composites. Metalurji, Cilt: 23 - Sayı: 119, 20–28. https://ajindex.com/articles/580372