SavedAdd your journal

Journals / Kastamonu Üniversitesi Orman Fakültesi Dergisi / 2021 / Cilt: 21 - Sayı: 2

Investigation of Chemical and Morphological Properties of the Sapwood and Heartwoods of Stone Pine and Black Locust

Fıstıkçamı ve Yalancı Akasya Öz ve Diri Odunlarının Kimyasalve Morfolojik Özelliklerinin Araştırılması

Saniye ERKAN
İbrahim BEKTAŞ
Pages
183–195
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Highlights: To investigate the suitability of Stone Pine and Black Locust to pulp and paper production.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Aim of study: The chemical and morphological properties of sapwood and heartwood of stone pine and black locust were determined.
📊
Key Findings & Data:The chemical properties holocellulose, cellulose, lignin, alpha cellulose, ash, ether, cold and hot water and 1% NaOH solubility percentages were analysed.
💡
Conclusion & Impact:Highlights: To investigate the suitability of Stone Pine and Black Locust to pulp and paper production.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Aim of study: The chemical and morphological properties of sapwood and heartwood of stone pine and black locust were determined. Material and methods: Preparation of samples of stone pine and black locust sapwood and heartwood was carried out by adhering to the TAPPI Standard Methods. The chemical properties holocellulose, cellulose, lignin, alpha cellulose, ash, ether, cold and hot water and 1% NaOH solubility percentages were analysed. In order to determine the morphological properties of the woods, the fiber size of the maserated wood samples were measured under a screened visopane microscope. Using the data obtained from fiber sizes, felting ratio, stiffness coefficient, runkel ratio, elasticity classification, Mühlstep coefficient and F factor values were calculated. Main results: From the chemical analysis and morphological measurement results, significant differences were found according to the independent T Test statistical analysis between sapwoods and heartwoods. In addition, the solubility values of heartwoods were found to be lower than that of sapwoods, the chemical and morphological properties of all wood samples coincide with those specified in the literature. Highlights: To investigate the suitability of Stone Pine and Black Locust to pulp and paper production.

Özet

Çalışmanın amacı: Fıstıkçamı ve yalancı akasya diri ve öz odunlarının kimyasal ve morfolojik özellikleri tespit etmek. Materyal ve yöntem: Fıstıkçamı ile yalancı akasya diri ve öz odunu örneklerinin hazırlanması ve yapılan kimyasal analiz ve morfolojik ölçümler TAPPI standart yöntemine bağlı kalınarak gerçekleştirilmiştir. Çalışma kapsamında, kimyasal özelliklerinden holoselüloz, selüloz, lignin, alfa selüloz, kül oranı ile eter, soğuk su, sıcak su ile %1’lik NaOH çözünürlüğü oranı analiz edildi. Odunların morfolojik özelliklerini belirlemek için, masere edilen odun örneklerinin lif boyutları ekranlı vizopan mikroskopta ölçülmüştür. Lif boyutları ölçümlerinden elde edilen veriler kullanılarak keçeleşme oranı, rijidite katsayısı, runkel oranı, elastikiyet sınıflandırması, mühlstep katsayısı ve F faktörü değerleri hesaplanmıştır. Temel sonuçlar: Kimyasal analiz ve morfolojik ölçüm sonuçlarından, fıstıkçamı ile yalancı akasyanın diri ve öz odunları arasında yapılan bağımsız T Testi istatiktik analizine göre, önemli farklılıkların olduğu tespit edilmiştir. Ayrıca, diri odunlarının çözünürlük değerleri öz odunlara göre daha düşük bulunmuş ve tüm örneklerin kimyasal ve morfolojik özellikleri literatürdeki değerlerle örtüşmektedir. Araştırma vurguları: Fıstıkçamı ve Yalancı Akasya’nın kağıt hamuru ve kağıt üretimine uygunluğunu araştırmak

🔖

Cite This Article

ERKAN, S., BEKTAŞ, İ. (2022). Investigation of Chemical and Morphological Properties of the Sapwood and Heartwoods of Stone Pine and Black Locust. Kastamonu Üniversitesi Orman Fakültesi Dergisi, Cilt: 21 - Sayı: 2, 183–195. https://ajindex.com/articles/572687

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Akgün, H.C. (2005). Chemical composition of Anatolian chestnut wood and suitability for pulping. M. Sc. Thesis, Graduate School of Natural and Applied Sciences, Department of Forest Industrial Engineering, Zonguldak Karaelmas University, Bartın, Turkey. Alkan, Ç., Eroğlu, H. & Yaman, B. (2003). Fiber morphology of some natural Angiospermae taxa in Turkey, Zonguldak Karaelmas University, Bartın the Faculty of Forestry Journal, 5(5), 102-108.
  2. Ataç, Y. (2009). Examination of softwood and hardwood trees ın terms of paper properties of their sapwood and heartwood. Ph. D. Thesis, Graduate School of Natural and Applied Sciences, Department of Forest Industrial Engineering, Bartın University, Bartın, Turkey. Ataç, Y. & Eroğlu, H. (2013). The effects of heartwood and sapwood on kraft pulp properties of Pinus nigra J.F. Arnold and Abies bornmuelleriana Mattf. Turkish Journal of Agriculture and Forestry, 37, 243-248.
  3. Ay, N. & Şahin, H. (1998). An investigation of internal morphological properties of sapwood and heartwood of oriental spruce (Picea orientalis Link.). Turk J. Agric. For, 22, 203- 207. Bektaş, İ.,Tutuş, A. & Eroğlu, H. (1999). A study of the of Calabrian pine (Pinus brutia Ten.) for pulp and paper manufacture. Turkish journal of Agriculture and Forestry, 23, 589- 598. Bektaş, İ., Tutuş, A. & Gültekin, G. (2020). The Effect of Sapwood and Heartwood Differences on Mechanical Properties of FastGrowing Tree Species. Drvna industrija: Znanstveni časopis za pitanja drvne tehnologije, 71(3), 261-269.
  4. Bertaud, F. & Holmbom, B. (2004). Chemical composition of earlywood and latewoods in Norway Spruce heartwood, sapwood and transition wood. Wood Science Technology, 38, 245-256
  5. Bostancı, Ş. (1987). Pulp Production and Bleaching Technology. University Publication No.114, Faculty Publication No.13. Trabzon: Karadeniz Technical University Printing House. Bozkurt, Y. & Erdin, N. (1997).
  6. Wood Technology. İstanbul University, Publications of Faculty of Forestry, no. 445, İstanbul.
  7. Browning, B.L. (1967).
  8. Methods of Chemistry. I, New York, London, Sydney: Interscience Publishers.
  9. Casey, J.P. (1961). Cellulose and Paper Chemistry and Chemistry Technology. III. Edition, (2), 581-1249. New York: WileyInterscience Publishers Inc. Dadswell, H.E. & Watson, A.J. (1961). Influence of the Morphology of Wood Pulp Fibers on Paper Properties, In: Bloam, F., ed. Formation and Structure of Paper. (2), 537-564.
  10. London, England: Technical Section of the British Paper and Board Markers As