Journals / İstanbul Üniversitesi Mühendislik Fakültesi Yerbilimleri Dergisi / 2003 / Cilt: 16 - Sayı: 2

Evaluation of the limestones from the point of aggregate quality in İstanbul

İstanbul' da kireçtaşlarının agrega kalitesi yönünden değerlendirilmesi

Pages
61–70
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Hence, they can be used for many special purposes.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Developments in the construction sector in Turkey and increasing demand for good quality concrete have resulted in that demand for good quality crushed stone is also increased.
📊
Key Findings & Data:Limestones are the major source of crushed rocks for use in concrete in Istanbul, where the construction activity improved remarkable.
💡
Conclusion & Impact:Hence, they can be used for many special purposes.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Developments in the construction sector in Turkey and increasing demand for good quality concrete have resulted in that demand for good quality crushed stone is also increased. Limestones are the major source of crushed rocks for use in concrete in Istanbul, where the construction activity improved remarkable. In this study, the use of limestone in different composition and I texture as aggregates were investigated and evaluated from the point of their quality. The results were compared with each other and with the typical acceptance limits in international standards. According to petrographical and chemical characteristics, to quality and aggregate properties, the limestone aggregates are generally similar, with most values being within or very close to acceptable limits. Hence, they can be used for many special purposes.

Özet

İnşaat sektöründeki kaliteli betona olan ihtiyacın artması, iyi nitelikli kırmataşın da önemini arttırmıştır. Yapılaşmanın hızla geliştiği İstanbul'da kireçtaşları, agregaların ana kaynağını oluşturmaktadır. İstanbul ve yakın çevresindeki kireçtaşlarının bileşim ve dokusal olarak farklılıkları bulunmaktadır. Bu çalışmada, farklı bileşim ve dokudaki kireçtaşlarının, agrega olarak kullanılabilirliği araştırılmış ve kalite yönünden değerlendirilmesi yapılmıştır. Petrografik ve kimyasal özelliklerinin yanı sıra, kaliteleri ve agrega özellikleri nedeniyle İstanbul'daki tüm kireçtaşlarının özelliklerinin standartlarda belirtilen kabul edilebilir limitler içinde bulunması veya bu limit değerlere çok yakın olması nedeniyle birçok alanda kullanılmaları uygundur.

🔖

Cite This Article

ZARİF, İ. H., DURSUN, G., TUĞRUL, A. (2022). Evaluation of the limestones from the point of aggregate quality in İstanbul. İstanbul Üniversitesi Mühendislik Fakültesi Yerbilimleri Dergisi, Cilt: 16 - Sayı: 2, 61–70. https://ajindex.com/articles/554140

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. Arıoğlu, E. and Manzak, O., 1991, İstanbul çevresindeki bazı taş ocaklarında üretilen “beton iri agrega”ların mühendislik özelliklerinin irdelenmesi, Prefabrik Birliği, No: 20, 17-23. ASTM C 33-81, 1986, Standard specifications for concrete aggregates, Annual Book of ASTM Standards. ASTM C 88-83, 1989, Standard test for soundness of aggregates by use of sodium sulphate or magnesium sulphate, Annual Book of ASTM Standards. ASTM C127-88, 1989, Standard test method for density, relative density (specific gravity), and absorption of coarse aggregate, Annual Book of ASTM Standards. ASTM C128-88, 1989, Standard test method for density, relative density (specific gravity), and absorption of fine aggregate, Annual Book of ASTM Standards. ASTM C289-94, 1994, Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method), Annual Book of ASTM Standards. ASTM C131-96, 1996, Standard test method for resistance to abrasion of small size coarse aggregate by use of the Los Angeles machine, Annual Book of ASTM Standards. ASTM C1260-94, 1994, Standard method for potential alkali-silica reactivity of aggregates (mortar bar method), Annual Book of ASTM Standards. ASTM C586-99, 1992, Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks for Concrete Aggregates (Rock Cylinder Method), Annual Book of ASTM Standards. Bell, F.G., 1998,
  2. Engineering Geology, Blackwell Science, Third edition, 359 p. BS 812: Part 1, 1975,
  3. Testing Aggregates, Methods for determination of particle size and shape, British Standards Institution. BS 812: Part 2, 1975,
  4. Testing Aggregates, Methods for determination of physical properties, British Standards Institution. BS 812: Part 105-1, 1985, Testing aggregates, methods for determination of particle shape, Flakiness index, British Standards Institution. BS 812: Part 105-2, 1985, Testing aggregates, methods for determination of particle shape, Elongation index of coarse aggregate, British Standards Institution. BS 812: Part 117-2, 1988, Testing aggregates. Method for determination of water-soluble chloride salts, British Standards Institution. BS 812: Part 118-2, 1988, Testing aggregates. Method for determination of sulphate content, British Standards Institution. BS 8007, 1987, Code of practice for design of concrete structures for retaining aqueous liquids, British Standards Institution. CAN/CSA-A23.2-14A-M90, 1994, Test Methods for potential expansivity of Cement-Aggregate Combination (Concrete Prism Expansi