SavedAdd your journal

Journals / Istanbul University Journal of Electrical and Electronics Engineering / 2002 / Cilt: 2 - Sayı: 1

Yeni sentezlenen bir poliimidin dielektrik modeli üzerine bir çalışma

A study on dielectric modeling of a new synthesized polyimide

Hakan KUNTMAN
Ayten KUNTMAN
Pages
359–367
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, manufacturing a metal-polyimide-metal (MIM) structure and performing measurements on this MIM structure, changes observed in the complex permittivity of PI due to high temperature and humidity (RH) aging are modeled using a Debye-type function.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Polyimides (PI) have desirable properties for use in the electrical and electronics industry because they are a group of excellent high temperature heat-resistant organic polymers and have good planarization capability, excellent chemical resistance, low relative permitivity and electrical insulating properties.
📊
Key Findings & Data:A dielectric model for PI is required to understand the degradation due to various stresses such as high temperature and high humidity.
💡
Conclusion & Impact:In this study, manufacturing a metal-polyimide-metal (MIM) structure and performing measurements on this MIM structure, changes observed in the complex permittivity of PI due to high temperature and humidity (RH) aging are modeled using a Debye-type function.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Polyimides (PI) have desirable properties for use in the electrical and electronics industry because they are a group of excellent high temperature heat-resistant organic polymers and have good planarization capability, excellent chemical resistance, low relative permitivity and electrical insulating properties. A dielectric model for PI is required to understand the degradation due to various stresses such as high temperature and high humidity. In this study, manufacturing a metal-polyimide-metal (MIM) structure and performing measurements on this MIM structure, changes observed in the complex permittivity of PI due to high temperature and humidity (RH) aging are modeled using a Debye-type function.

Özet

Polimerler elektrik ve elektronik endüstrisinde elektriksel yalıtkanlık özellikleri nedeniyle yaygın olarak kullanılırlar. Özellikle poliimidler (PI), düşük dielektrik sabiti değeri, yüksek ısıl dayanıklık nedeniyle dielektrik ve izolatör olarak mikroelektronik ve sensor endüstrisinde yaygın bir kullanım alanı bulmaktadır. Bu çalışmada yeni sentez edilen bir poliimidin dielektrik özellikleri Debye modeli ile belirlenmiştir. Bu amaçla MİM yapısında kapasiteler oluşturulmuş ,bu yapı üzerinde yapılan ölçümlerden yararlanılarak sıcaklık ve nem etkilerine bağlı olarak ortaya çıkan kapasite değişimleri önerilen model yardımıyla hesaplanmıştır.

🔖

Cite This Article

KUNTMAN, H., KUNTMAN, A. (2022). Yeni sentezlenen bir poliimidin dielektrik modeli üzerine bir çalışma. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 2 - Sayı: 1, 359–367. https://ajindex.com/articles/543952

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Kuntman, A., Kuntman, H., “Study on dielectric properties of a new polyimide film suitable for interlayer dielectric material in microelectronics applications”, Microelectronics Journal, Vol. 31, 629-634, 2000
  2. Kuntman, A., Yýlmaz, T., Güngör, A., Baysal, B. “A New Polyimide Film for Very Large-Scale Integration (VLSI) and its Electrical Characterization ”IEEE Transactions on Dielectrics and Electrical Insulation, Vol.5, 296- 300, 1998
  3. Maier, G., Banerjee, S., “Polymers for low dielectric constant / high temperature applications in microelectronics”, Proceedings of IUPAC’99 Conference, 237, Berlin, Germany, 14-19 August 1999
  4. Kuntman, A., Yýlmaz, T., Güngör, A., Baysal, B.M., “Electrical Properties of a new polyimide film for Microelectronics Applications”, Chimia, Journal for Chemistry: Special Issue for Proc. of IUPAC’97, Nr.7, p.51, Geneva, Switzerland, 1997
  5. Lian, A., Martinu, L. and Wertheimer, M.R., “Electrical Conduction in Double-layer PSiO2/ Polymer Dielectric Structures”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol 2, No1, 62-73, 1995
  6. Hendricks, N.H., Lau, K.S.Y., Smith A.R. and Wan, W.B., “In low -Dielectric constant Materials -Synthesis and Application”, Microelectronics, Volume 381, 59 (Materials Research society, San Francisco, California, 1995
  7. Soone, D.S., Martynenko, Z., Polymer in Microelectronics, Fundamentals and Application, Elsevier, USA, 1989
  8. Ralston, A.R.K., Buncick, M.C., Denton, D.D., Boltshauser, T.E., Funk, J.M. and Baltes, H.P., “Effects of Aging on Polyimide. A model for dielectric Behavior”. IEEE, 91 CH 2817- 5/91/0000-0759, 759-763, 1991
  9. Ku, C.C. and Liepins, R., “Electrical Properties of Polymers”, Hanser Publishers, Munich, 1987
  10. Glenn, M.C. and Schuetz, J.A., “An IC Compatible Polymer Humidity Sensor”, Proc. Int. Conf. On Solid-State Sensors and Actuators, 217-220, 1985
  11. Denton, D.D., Ho, C. and Sen-gang, H., “A Solid State Relative Humidity Measurement System”, IEEE Trans. On Instr. And Meas. Vol.39, 508-511, 1990
  12. Sacher, E. and Susko, J.R., “Water Permeation of Polymer Films:3, High Temperature Polyimides”, J. Appl. Polym. Sci., Vol. 26, 679-686, 1981
  13. Denton, D.D., Buncick M.C. and Pranjoto, H., “Effects of Process History and Aging on the Properties of Polyimide Films”, J.Mat. Res., Vol.6, 2747-2754, 1991
  14. Jaafar, M.A.S., Ralston, A.R.K. and Denton, D.D., “The Long Term Reliability of a Switched- Capacitor Relative Humidity Sensor Sy