SavedAdd your journal

Journals / Istanbul University Journal of Electrical and Electronics Engineering / 2006 / Cilt: 6 - Sayı: 1

Study on the driving model of ultrasonic motor

Gu CHENGLIN
Zhao CHUNSHENG
Li HUAFENG
Pages
1–6
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

And then the effects of the motor's parameters on its performance are investigated, which will be helpful to the design of the ultrasonic motor.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The interface contact model between the stator and the rotor of traveling wave ultrasonic motor is presented, assuming that the rigid stator contacts the flexible rotor over an area, and the frictional material is regarded as distributed linear spring and without shearing deformation, from which the mechanical characteristic of the motor and the interface transmission efficiency are derived.
📊
Key Findings & Data:The interface contact model between the stator and the rotor of traveling wave ultrasonic motor is presented, assuming that the rigid stator contacts the flexible rotor over an area, and the frictional material is regarded as distributed linear spring and without shearing deformation, from which the mechanical characteristic of the motor and the interface transmission efficiency are derived.
💡
Conclusion & Impact:And then the effects of the motor's parameters on its performance are investigated, which will be helpful to the design of the ultrasonic motor.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The interface contact model between the stator and the rotor of traveling wave ultrasonic motor is presented, assuming that the rigid stator contacts the flexible rotor over an area, and the frictional material is regarded as distributed linear spring and without shearing deformation, from which the mechanical characteristic of the motor and the interface transmission efficiency are derived. And then the effects of the motor's parameters on its performance are investigated, which will be helpful to the design of the ultrasonic motor.

🔖

Cite This Article

CHENGLIN, G., CHUNSHENG, Z., HUAFENG, L. (2022). Study on the driving model of ultrasonic motor. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 6 - Sayı: 1, 1–6. https://ajindex.com/articles/543813

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. R. F. Fung, C. M. Yao, D. G. Chang. “Dynamic and Contact Analysis of a Bimodal Ultrasonic Motor”. IEEE Trans. on Ultrasonics, Ferroelectrics, and Frequency Control, 1999(1): 47-60 [2] Lu F, Lee H.P, Lim S.P. “Contact modeling of viscoelastic friction layer of traveling wave ultrasonic motors”. Smart Materials and Structures, 2001(2): 314- 320 [3] Takashi Maeno, David B. Bogy. “Effect of the Rotor/Stator Interface Condition Including Contact Type, Geometry, and Material on the Performance of Ultrasonic Motors”. Journal of Tribology, October 1994: 726-732 [4] Takashi Maeno, Takayuki Tsukimoto. “Finite-element analysis of the rotor/stator contact in a ring-type ultrasonic motor”. IEEE. Ultrasonics, Ferroelectrics and Frequency Ccontrol. 1992(6): 668-674 [5] Takashi Maeno, David B. Bogy. “Effect of the hydrodynamic bearing on rotor/stator contact in a ring-type ultrasonic motor”. IEEE. Ultrasonics, Ferroelectrics and Frequency Ccontrol. 1992(6): 675-682 [6] Takashi Maeno, David B. Bogy. “FE Analysis and LDA Measurement of the Dynamic Rotor/Stator Contact in a RingType Ultrasonic Motor”. Journal of Tribology, October 1993: 625-631 [7] Wen shizhu. Tribology. Press of Peking university, 1990