Journals / Istanbul University Journal of Electrical and Electronics Engineering / 2007 / Cilt: 7 - Sayı: 1

A study on the insulation capacity of polymeric composite materials blended with boron minerals

Pages
367–371
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

At the next stage before the test rocess similar sampleshave been aged artificially by usingDC vibration motor according to results the mean breakdown time increase with boron concentration.However lateral vibration has reduced the service life of composite samples up to 50 %

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Boron minerals which are widely found in Turkey and U.S.A. has become quite popular during recentyears due to their superior flame reatardance capabilities in electric systems.
📊
Key Findings & Data:Inthe first part of the study polyester samples blended with different type and concentration of boronminerals has been tested in laboratory conditions according to ASTM D 2303 surface tracking testmethod.
💡
Conclusion & Impact:At the next stage before the test rocess similar sampleshave been aged artificially by usingDC vibration motor according to results the mean breakdown time increase with boron concentration.However lateral vibration has reduced the service life of composite samples up to 50 %
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Boron minerals which are widely found in Turkey and U.S.A. has become quite popular during recentyears due to their superior flame reatardance capabilities in electric systems. In this study fourdifferent types of boron minareals such as tincal, ulexite, colemanite and boric acid has been used. Inthe first part of the study polyester samples blended with different type and concentration of boronminerals has been tested in laboratory conditions according to ASTM D 2303 surface tracking testmethod. At the next stage before the test rocess similar sampleshave been aged artificially by usingDC vibration motor according to results the mean breakdown time increase with boron concentration.However lateral vibration has reduced the service life of composite samples up to 50 %

🔖

Cite This Article

GÜNEŞ, İ., UGUR, M., ERSOY, A., KUNTMAN, A. (2022). A study on the insulation capacity of polymeric composite materials blended with boron minerals. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 7 - Sayı: 1, 367–371. https://ajindex.com/articles/543796

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. T.G.Gustavsson., S.M.Gubanski, H.Hillborg, S.Karlsson and U.W.Gedde, “Aging of Silicone Rubber under AC or DC Voltages in a Coastal Enviroment”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol.8, No.6, pp.1029- 1039, 2001
  2. Aysel ERSOY, Ayten KUNTMAN, Mukden UĞUR, “Improvement of flame reterdant properties in polyester insulators”, 8th International Conference on Solid Dielectrics (ICSD 2004), pp.336-338, 5-9 Temmuz 2004, Tolouse, Fransa
  3. C.Martin, J.C.Ronda, V.Cnoliz, “Boron- containing novolac resins as flame retardant materials”, Polymer Degradation and Stability, 2005
  4. V. I. Kodolov, S. G. Shuklin, A. P. Kuznetsov, L. G. Makarova, S. G. Bystrov, O. V. Demicheva, T. A. Rudakova, “Formation and investigation of epoxy ıntumescent compositions modified by active additives”, Journal of Applied Polymer Science, Vol.85, pp.1477-1483, 2002
  5. C. Tian, H. Wang, X. Liu, Z. Ma, H. Guo, J. Xu, “Flame retardant flexible poly (vinyl chloride) compound for cable application”, Journal of Apllied Polymer Science, Vol.89, pp.3137-3142, 2003
  6. B.Garba, “Effect of zinc borate as flame retardant formulation on some tropical woods”, Polymer Degradation and Stability, Vol.64, pp.517-522, 1999
  7. Aysel ERSOY, Ayten KUNTMAN, Mukden UĞUR, İbrahim GÜNEŞ, "Bor Katkısının Yorulmaya Maruz Bırakılmış Polyester Yalıtkanların Servis Ömrü Üzerine Etkileri", III. Ege Enerji Sempozyumu Ve Sergisi, 24-26 Mayıs 2006, Muğla. [8] “Standard test methods for liquid contaminant, inclined plane tracking and erosion of insulating materials”, ASTM D (2303), pp.258-270, 1983.