Simulation resultsbased on MATLAB/SIMULINK are presented to verify the good performance
📌 3 Key Takeaways
🎯
Objective & Hypothesis:A double-source alternate backup type unified power quality conditioner (DS-UPQC) is proposed inthis paper, which consists of two shunt inverters and two series inverters, the shunt inverters areconnected alternately to the series inverters through the dc links, and a simple effective controlscheme is also proposed.
📊
Key Findings & Data:DS-UPQC can compensate harmonic voltage, voltage sag and swell, voltageinterruption, three-phase voltage unbalance, harmonic current and reactive power current.
💡
Conclusion & Impact:Simulation resultsbased on MATLAB/SIMULINK are presented to verify the good performance
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
A double-source alternate backup type unified power quality conditioner (DS-UPQC) is proposed inthis paper, which consists of two shunt inverters and two series inverters, the shunt inverters areconnected alternately to the series inverters through the dc links, and a simple effective controlscheme is also proposed. DS-UPQC can compensate harmonic voltage, voltage sag and swell, voltageinterruption, three-phase voltage unbalance, harmonic current and reactive power current. Theproposed system can realize the desired power alternate backup among different sources, and provideuninterrupted power supply $Box$ thereby improve power system reliability effectively. Simulation resultsbased on MATLAB/SIMULINK are presented to verify the good performance
🔖
Cite This Article
LIU, H., WANG, D., MAO, C., LU, J. (2022). Double-source alternate backup type unified power quality conditioner. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 9 - Sayı: 1, 887–894. https://ajindex.com/articles/543734
R. Arnold, “Solutions to the Power Quality Problem”, Power Engineering Journal, 2001, 15(2): 65-73
R. Lamedica, G. Esposito, “A Survey on Power Quality Cost in Industrial Loads”, IEEE Winter power meeting, 2001,Vol:2, pp. 938-943
M.M. Marcos, J.C. Gomez, “Electric power quality-the strong connection with power electronics”, IEEE Power and Energy Magazine, 2003, 1(5): 18-25
B. Singh, K. Al-Haddad, A. Chandra, “A Review of Active Power Filters for Power Quality Improvement”, IEEE Trans on Industrial Electronics, 1999, 45(5):960-971
Wang Qun, Yao Weizheng, Liu Jinjun, “Harmonics Source and Compensation Characteristics of Active Power Filters”, Proceedings of the CSEE, 2001, 21(2):16- 20
Wu Weimin, Tonf Liqing, Qian Zaoming, “A Research on New Control Strategy for Series type Active Power Filter”, Proceedings of the CSEE, 2005, 25(3):38- 43
A. Chandra, B. Singh, B.N. Singh, K. AI- Haddab, ”An Improved Control Algorithm of Shunt Active Filter for Voltage Regulation, Harmonic Elimination, Power Factor Correction, and Balancing of Nonlinear Loads”, IEEE Trans. on Power Electronics, 2000, 15(3):495-507
B.A. Renz, A. Keri, A. Mehraban, “AEP Unified Power Flow Controller Perfor- mance”, IEEE Trans. Power Delivery, 1999, 14(9):1374- 1381
Farrukh Kamron, “Combined Deadbeat Control of Series-parallel Converter Combination Used as a Universal Power Filter”, IEEE Power Electronics Specialists Conf., 1995, pp. 196-201
M.T. Haque, T. Ise, S.H. Hosseini, “A Novel Control Strategy for Unified Power Quality Conditioner”, IEEE Power Electronics Specialists Conf., June, 2002, Vol:1, pp. 94-98
B. Han, B. Bae, S. Baek, “New Configuration of UPQC for Medium- Voltage Application”, IEEE Trans. on power delivery, 2005
A. Elnady, M.M.A. Salama, “New Functi- onalities of the Unified Power Quality Conditioner”, Transmission and Distribution Conference and Exposition, 2001 IEEE/PES, 2001, Vol: 1, pp. 415-420.