SavedAdd your journal

Journals / Istanbul University Journal of Electrical and Electronics Engineering / 2010 / Cilt: 10 - Sayı: 1

Design table formation of stepped impedance prototype filters

Metin ŞENGÜL
Pages
1129–1134
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Then a design example is given, to show the utilization of the formed table.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In literature, there exist some tables containing normalized element values, to design low-pass lumped-element prototype filters with several different responses like maximally flat or equal-ripple.
📊
Key Findings & Data:By using the proposed algorithm, a table for 0.5 dB equal-ripple stepped impedance prototype filter is formed.
💡
Conclusion & Impact:Then a design example is given, to show the utilization of the formed table.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In literature, there exist some tables containing normalized element values, to design low-pass lumped-element prototype filters with several different responses like maximally flat or equal-ripple. In this work, an algorithm is presented, to form such tables for stepped impedance prototype filters. By using the proposed algorithm, a table for 0.5 dB equal-ripple stepped impedance prototype filter is formed. Then a design example is given, to show the utilization of the formed table.

🔖

Cite This Article

ŞENGÜL, M. (2022). Design table formation of stepped impedance prototype filters. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 10 - Sayı: 1, 1129–1134. https://ajindex.com/articles/543721

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Pozar DM, Microwave Engineering, John Wiley & Sons, Inc., 3rd ed., 2005
  2. Matthaei GL, Young L, Jones EMT, Microwave filters, impedance-matching networks and coupling structures: Dedham, Mass.: Artech House, 1980
  3. Carlin HJ, Distributed circuit design with transmission line elements, Proc. IEEE 1971; 59(7): 1059-1081
  4. Richards PI, Resistor-termination-line circuits, Proc. IRE 1948; 36: 217-220
  5. Belevitch V, Classical Network Theory: San Francisco, CA: Holden Day, 1968
  6. Aksen A, Design of lossless two-port with mixed lumped and distributed elements for broadband matching, Ph.D. dissertation, Bochum, Ruhr University, 1994
  7. Ikeno N, A design theory of distributed constant filters, J Elec Comm Eng Japan 1952; 35: 544-549
  8. Carlin HJ, Friedenson RA, Gain bandwidth properties of a distributed parameter load, IEEE Trans. Circuit Theory 1968; 15: 455- 464
  9. Fettweis A, Cascade synthesis of lossless two ports by transfer matrix factorization, in R. Boite, Network Theory, Gordon&Breach, 1972
  10. Şengül M, Synthesis of cascaded lossless commensurate lines, IEEE Trans. CAS-II 2008; 55(1): 89-91
  11. Şengül M, Explicit Synthesis Formulae for Cascaded Lossless Commensurate Lines, Frequenz Journal of RF Engineering and Telecommunications 2008; 62(1-2): 16-17
  12. Yarman BS, A simplified real frequency technique for broadband matching complex generator to complex loads, RCA Review 1982; 43: 529-541
  13. Yarman BS, Carlin HJ, A simplified real frequency technique applied to broadband multi-stage microwave amplifiers, IEEE Trans. Microwave Theory and Tech. 1982; 30: 2216-2222
  14. AWR: Microwave Office of Applied Wave Research Inc., AWR, El Segundo, CA, 2007 [Online]. Available: www.appwave.com.