It is evaluated that in automotive applications lamps using LEDs could be successfully utilized depending on the optical efficacy of the LED used, the designs of the LED driver and the reflecto
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In this study a working lamp used on the offroad working machines and vehicles is designed by using the LED diodes instead of a halogen bulb.
📊
Key Findings & Data:In the design, firs tly a LED array is determined and a proper driver circuit that can provid e the required optical power is designed, and the working lamp developed is tested under various conditions.
💡
Conclusion & Impact:It is evaluated that in automotive applications lamps using LEDs could be successfully utilized depending on the optical efficacy of the LED used, the designs of the LED driver and the reflecto
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters
Abstract
In this study a working lamp used on the offroad working machines and vehicles is designed by using the LED diodes instead of a halogen bulb. In the design, firs tly a LED array is determined and a proper driver circuit that can provid e the required optical power is designed, and the working lamp developed is tested under various conditions. The luminous output values of the designed LED working lamp are compared with those of a commercial working lamp, which uses a halogen bulb. It is evaluated that in automotive applications lamps using LEDs could be successfully utilized depending on the optical efficacy of the LED used, the designs of the LED driver and the reflecto
🔖
Cite This Article
YAKIŞIR, B., ÇİL, C. Z. (2022). Desıgnıng an off-road workıng lamp wıth leds. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 11 - Sayı: 1, 1291–1298. https://ajindex.com/articles/543704
E. Musayev, Semiconductor Light Sources Connection and Biasing Methods, Uludağ University, Journal of Engineering and Architecture, Vol. 10, No.2, pp. 63-78, 2005
E. Musayev, Investigation of Homogeneity of the LED Light, Illumination, Electronic, Automation, Energy, Journal of Machine and Control Systems, No. 118, 190-195, 2004
S. Winder, Power Supplies for LED Driving, Elsevier Science, Boston, MA, USA, 2008
Edixeon Dx, Ex Series LEDs, Application Notes, Edison Opto Corporation, USA, 2008
M. Hansen, LED lighting: more energy efficient than CFL, Energy-efficient lighting lifecycle-white paper, Cree Inc., USA, 2009
B. Weir, Trends and Tradeoffs in Powering LED Luminaire, LED Journal, pp.8-11, Nov-Dec 2008
E. Hoyt, Driving LEDs in the Automotive World, LED Journal, pp.15-17, Nov-Dec 2008
E. Uiga, Prentice Hall, Optoelectronics, New Jersey Colombus, OH, USA, 1995
M. Calvert, LED Driver Applications for Portable Products, AN-23 Microsemi Integrated Products, USA, 2000
K. Curtis, Buck Configuration High-Power LED Driver, AN874, Microchip Technology Inc, USA, 2003
Constant, Off-time, Buck-based, LED Drivers Using the HV9910B, Application Note, AN-H50, 2009
Luxeon Star, Basic Driver Circuits for Evaluating Luxeon LEDs. Application Notes, Electrical Drive Information Luxeon Emitter, App. Notes AB11L, 2004
A. Mednik, Automotive LED Lighting Needs Special Driver, Supertex Inc. Sunnyvale, CA, USA, 2005
G. Held, Introduction to Light Emitting Diode Technology and Applications, CRC Press, Boca Raton, FL, USA, 2009
CIE Statement on Energy Conservation and Lighting, Publication CIE, No.29, 1975
A.K. TÜRKOĞLU, F. SAMADOV, M. DURAK, U. KÜÇÜK, Otomotiv Sektöründe Optik Test ve Ölçümün Yeri, III. Ölçüm Bilim Kongresi Bildiri Kitapçığı, EskiĢehir, 1999, s. 140- 145