Journals / Istanbul University Journal of Electrical and Electronics Engineering / 2014 / Cilt: 14 - Sayı: 2

CURRENT FED FULL-BRIDGE CONVERTER WITH VOLTAGE DOUBLER FOR PHOTOVOLTAIC SYSTEM APPLICATIONS

Pages
1779–1789
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The effectiveness of the system is also verified by using the hardware implementation

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this paper Maximum Power Point Tracking (MPPT) algorithm for photovoltaic (PV) system with current fed DC-DC converter is proposed.
📊
Key Findings & Data:For getting the high output voltage, Proportional Integral (PI) controller is used to control the DC-DC converter and Zero Voltage Switching (ZVS) is also implemented for all switches to improve the performance of converter.
💡
Conclusion & Impact:The effectiveness of the system is also verified by using the hardware implementation
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this paper Maximum Power Point Tracking (MPPT) algorithm for photovoltaic (PV) system with current fed DC-DC converter is proposed. Various techniques have been proposed for tracking the maximum power from the photovoltaic (PV) cell to obtain the high efficiency and to protect the systems from the variations of the temperature and irradiance. In this paper Incremental Conductance (IC) MPPT algorithm is used to track maximum output power. For getting the high output voltage, Proportional Integral (PI) controller is used to control the DC-DC converter and Zero Voltage Switching (ZVS) is also implemented for all switches to improve the performance of converter. Additionally voltage doubler is connected in the secondary side which results in twice the amount of output voltage with reduced components. The simulation is carried out by using the MATLAB/Simulink software tools to demonstrate the working of the proposed system. The effectiveness of the system is also verified by using the hardware implementation

🔖

Cite This Article

BALAMURUGAN, R., KAMSALA, V., NITHYA, R. (2022). CURRENT FED FULL-BRIDGE CONVERTER WITH VOLTAGE DOUBLER FOR PHOTOVOLTAIC SYSTEM APPLICATIONS. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 14 - Sayı: 2, 1779–1789. https://ajindex.com/articles/543655

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. 1] R., Senani “Active Simulation of Inductors Using Current Conveyors,” Electronics Lett., vol. 14, pp. 483-484, 1978. [2] A.N., Paul and D., Patranabis “Active Simulation of Grounded Inductors Using a Single Current Conveyor,” IEEE Trans. on Circuits and Systems, vol. 28, pp. 164-165, 1981. [3] W.,Surakampontorn and P., Thitimajshima “Integrable Electronically Tunable Current Conveyors,” IEE Proc., Pt. G, vol. 135, pp. 71-77, 1988. [4] I.A., Khan, M.T., Ahmed and N., Minhaj “Novel Technique for Immitance Simulation–Realisation of Some All-Active Simulators,” Int’l J. of Electronics, vol. 72, pp. 431-441, 1992. [5] C.L., Hou, R.D., Chen, Y.P., Wu, and P.C., Hu “Realization of Grounded and Floating Immitance Function Simulators Using Current Conveyors,” Int’l J. of Electronics, vol. 74, pp. 917-923, 1993. [6] C.M., Chang, H.Y., Wang and C.C., Chien “Realization of Series Impedance Functions Using one CCII+,” Int’l J. of Electronics, vol. 76, pp. 83- 85, 1994. [7] S.I., Liu and C.Y., Yang “Higher-Order Immitance Function Synthesis Using CCIIIs,” Electronics Lett., vol. 32, pp. 2295-2296, 1996. [8] A., Fabre, H., Amrani and O., Saaid “CurrentMode Bandpass Filters with Q Magnification,” IEEE Trans. on Circuits and Systems-II, vol. 43, pp. 839-842, 1996. [9] O., Çiçekoğlu “Active Simulation of Grounded Inductors with CCII+s and Grounded Passive Elements,” Int’l J. of Electronics, vol. 85, pp. 455- 462, 1998. [10] H., Kuntman, M., Gülsoy and O., Çiçekoğlu “Actively Simulated Grounded Lossy Inductors Using Third Generation Current Conveyors,” Microelectronics J., vol. 31, pp. 245-250, 2000 [11] H.Y., Wang and C.T., Lee, “Systematic Synthesis of R-L and C-D Immitances Using CCIII, Int’l J. of Electronics, vol. 87, pp. 293-301, 2000. [12] G., Ferri and N., Guerrini “High-Valued Passive Element Simulation Using Low-Voltage LowPower Current Conveyors for Fully Integrated Applications,” IEEE Trans. on Circuits and Systems-II, vol. 48, pp. 405-409, 2001. [13] E., Yuce “Grounded inductor simulators with improved low frequency performances”, IEEE Transactions on Instrumentation and Measurement, 57(5), 1079–1084, 2008. [14] M., Incekaraoglu and U.Cam, “Realization of series and parallel R-L and C-D impedances using single differential voltage current conveyor”, Analog Integrated Circuits and Signal Processing, 43, 101–104, 2005. [15] E., Yuce and S., Minaei “A modified CFOA and its applications to simulated inductors, capacitance multipliers, and analog filters”, IEEE Tra