Journals / Istanbul University Journal of Electrical and Electronics Engineering / 2017 / Cilt: 17 - Sayı: 1

A POWER RESOLUTION FOR COST EFFECTIVE COMPENSATION AND HARMONIC SOURCE DETECTION IN SMART POWER GRIDS

Pages
3155–3168
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

To show that the proposed resolution attains its goals, the simulation and experimental based analysis are presented in this paper

📌 3 Key Takeaways

🎯
Objective & Hypothesis:It is seen from the preliminary work [1] of this paper that in the literature there is a need for a power resolution, which can be utilized for (i) the direct provision of the optimum compensation capacitor’s power and (ii) obtaining meaningful information on the detection of the harmonic producing loads.
📊
Key Findings & Data:This paper proposed a power resolution that can be used to achieve both goals under nosinusoidal and unbalanced conditions in the smart power grids.
💡
Conclusion & Impact:To show that the proposed resolution attains its goals, the simulation and experimental based analysis are presented in this paper
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

It is seen from the preliminary work [1] of this paper that in the literature there is a need for a power resolution, which can be utilized for (i) the direct provision of the optimum compensation capacitor’s power and (ii) obtaining meaningful information on the detection of the harmonic producing loads. This paper proposed a power resolution that can be used to achieve both goals under nosinusoidal and unbalanced conditions in the smart power grids. First goal is important for cost effective unity power factor compensation including a basic capacitor and an active compensator. The second goal is required for the practical detection of harmonic producing loads by using the demand meters, which are employed to measure the powers for the energy billing of the consumers. The proposed power resolution is based on the separation of load current into orthogonal components as active, reactive, scattered conductance, scattered susceptance, unbalanced conductance and unbalanced susceptance currents, which are all related to the conductance and susceptance parameters of the load. To show that the proposed resolution attains its goals, the simulation and experimental based analysis are presented in this paper

🔖

Cite This Article

BALCI, M. E., HOCAOGLU, M. H. (2022). A POWER RESOLUTION FOR COST EFFECTIVE COMPENSATION AND HARMONIC SOURCE DETECTION IN SMART POWER GRIDS. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 17 - Sayı: 1, 3155–3168. https://ajindex.com/articles/543611

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. M. E. Balci, M. H. Hocaoglu, “A power resolution for nonsinusoidal and unbalanced systems — Part I: Literature overview and motivation”, ELECO 2011, Bursa, Turkey, 1-4 December 2011, pp. I-167 - I-172
  2. M. E. Balci, A. E. Emanuel, “Apparent power definitions: A comparison study”, IREE Journal, vol. 6, no. 6, pp. 2713-2722, November 2011
  3. M. E. Balci, M. H. Hocaoglu, “Quantitative comparison of power decompositions”, Electric Power Systems Research, vol. 78, no. 3, pp. 318-329, March 2008
  4. M. E. Balci, M. H. Hocaoglu, “Comparative review of multi-phase apparent power definitions”, ELECO 2009, Bursa, Turkey, 5-8 November 2009, pp.I-144,I-148
  5. M. E. Balci, M. H. Hocaoglu, “A current decomposition-based method for computationally efficient implementation of power resolution meters in non- sinusoidal single-phase systems”, Metrology and Measurement Systems, vol. 20, no. 2, pp. 263-274, June 2013
  6. M. E. Balci, M. H. Hocaoglu, ‘‘New power decomposition for sinusoidal and nonsinusoidal conditions’’, IEEE ICHQP 2006, Cascais, Portugal, September 2006
  7. M. E. Hocaoglu, M. H. Hocaoglu, “An analysis on the nonactive powers for nonsinusoidal conditions”, Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 26, no. 2, pp. 307-313, June 2011 (in Turkish)
  8. M. E. Balci, M. H. Hocaoglu, “A power resolution for nonsinusoidal and unbalanced systems — Part II: Theoretical backgorund”, ELECO 2011, Bursa, Turkey, 1-4 December 2011, pp. I-173 - I-178
  9. M. E. Balci, M. H. Hocaoglu, “Addendum to a power resolution for nonsinusoidal and unbalanced systems: Evaluation examples”, ELECO 2011, Bursa, Turkey, 1-4 December 2011, pp. I-179 - I-182
  10. AC Quantities- Part 1: Single-Phase Circuits, Part 2: Polyphase Circuits, DIN Std. 40110, 1994 and 2002. (in German)
  11. IEEE Standard Definitions for the Measurement of Electric Power Quantities under Sinusoidal, Nonsinusoidal, Balanced or Unbalanced Conditions, IEEE Std. 1459, 2010
  12. J. L. Willems, J. A. Ghijselen, A. E. Emanuel, ‘‘The apparent power concept and the IEEE Standard 1459- 2000’’, IEEE Trans. on Power Deliv., vol. 20, no. 2, pp. 876-884, April 2005
  13. J. L. Willems, J. A. Ghijselen, A. E. Emanuel, ‘‘Addendum to the apparent power concept and the IEEE Standard 1459-2000’’, IEEE Trans. on Power Deliv., vol. 20, no. 2, pp. 885-886, April 2005
  14. L. S. Czarnecki, ‘‘Physical reasons of currents RMS value increase in power systems with nonsinusoidal voltage’’,