Journals / Isı Bilimi ve Tekniği Dergisi / 2012 / Cilt: 32 - Sayı: 1

Isıtma sürecinde farklı ısıtma modlarının otomobil kabini içerisindeki sıcaklık ve bağıl neme olan anlık etkileri

Transient effects of different heating modes on temperature and humidity inside the automobile cabin during heating period

Pages
101–107
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The obtained results can be used to improve otherthermal comfort studies inside automobiles and also CFD analyses can be validated under transient conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of this study is to investigate the transient effects of heater on temperature and humidity in anautomobile cabin under transient heating period.
📊
Key Findings & Data:In the experiments only plane vents were operated with three different air velocity levels.Temperature and relative humidity differences between air velocity levels were obtained, relations between time,temperature and relative humidity were calculated.
💡
Conclusion & Impact:The obtained results can be used to improve otherthermal comfort studies inside automobiles and also CFD analyses can be validated under transient conditions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The aim of this study is to investigate the transient effects of heater on temperature and humidity in anautomobile cabin under transient heating period. Interior volume of an automobile is relatively small to other indoorenvironments, so that temperature and humidity values can rapidly change under highly transient conditions. Studiesthat are investigating the effects of heater on automobile cabin environment in real car conditions are restricted.Experiments were carried out in a parked car inside a laboratory at nights to prevent the possible wind and solarirradiation effects. In the experiments only plane vents were operated with three different air velocity levels.Temperature and relative humidity differences between air velocity levels were obtained, relations between time,temperature and relative humidity were calculated. From this study it is understood that temperature and relativehumidity values inside a car vary directly from air velocity values. The obtained results can be used to improve otherthermal comfort studies inside automobiles and also CFD analyses can be validated under transient conditions.

Özet

Bu çalışmanın amacı ısıtıcının bir otomobil kabini içerisindeki sıcaklık ve bağıl neme olan anlık etkilerininincelenmesidir. Otomobil kabini diğer iç ortamlara göre daha küçük olduğundan sıcaklık ve bağıl nem değerlerigeçici rejim koşullarında çok hızlı bir biçimde değişmektedir. Isıtıcının otomobil kabini içerisindeki etkilerini gerçekkabin ortam koşullarında inceleyen çalışmalar oldukça sınırlıdır. Deneyler olası rüzgar ve güneş ışınımı etkileriniönlemek için laboratuarda park edilmiş bir otomobil içerisinde gerçekleştirilmiştir. Deneylerde üç ayrı hava hızdüzeyi olan konsol menfezleri çalıştırılmıştır. Sıcaklık ve bağıl nem değerlerini hava hız düzeylerine göre farklılıklarıve zamana göre sıcaklık, bağıl nem değerleri arasındaki bağıntılar elde edilmiştir. Bu çalışmadan anlaşıldığı üzerearaba kabini içerisindeki sıcaklık ve bağıl nem değerleri hava hızı değerlerinden doğrudan etkilenmektedir. Buçalışmadan elde edilen sonuçların, otomobillerdeki ısıl konfor çalışmalarının geliştirilmesinde ve geçici rejimkoşullarında gerçekleştirilen sayısal hesaplamalı akışkanlar dinamiği analizlerinin doğrulanmasında kullanılabilir.

🔖

Cite This Article

KILIÇ, M., KORUKÇU, M. Ö. (2022). Isıtma sürecinde farklı ısıtma modlarının otomobil kabini içerisindeki sıcaklık ve bağıl neme olan anlık etkileri. Isı Bilimi ve Tekniği Dergisi, Cilt: 32 - Sayı: 1, 101–107. https://ajindex.com/articles/542562

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Akyol, Ş.M., Kılıç, M., Dynamic Simulation of HVAC System Thermal Loads in an Automobile Compartment., Int. J. of Vehicle Design, Vol.52, Nos.1/2/3/4, pp,177-198, 2010.
  2. Ambs, R., Improved Passenger Thermal Comfort Prediction in the Preprototype Phase by Transient Interior CFD Analysis Including Mannequins, SAE World Congress Detroit, Michigan, 2002. Aroussi, a. and Aghil, S., Characterisation of the flow Field in a Passenger Car Model, Optical Diagnostics in Engineering, Vol. 4(1), 1-15, 2000.
  3. Bhatti M. S., Riding in comfort: Part 1. ASHRAE J. September, 51-57, 1999a.
  4. Bhatti M. S., Riding in comfort: Part 2. ASHRAE J. August, 44-52, 1999b.
  5. Cascetta F., Musto, M., Assessment of thermal comfort in a car cabin with sky-roof, Journal of Automobile Engineering, 264, 2007.
  6. Cisternino M., Thermal climate in cabs and measurement problems, Proceedings of CABLI Seminar on Assessment of Thermal Climate in Operator’s Cabs, Florence (Uppsala: JTI – Swedish Institute of Agriculture and Environmental Engineering), pp. 16– 23, 1999.
  7. Daanen H. A. M., Vliert E. v. d. and Huang X., Driving Performance in Cold, Warm and Thermoneutral Environments, Applied Ergonomics. 34, 597-602, 2003.
  8. Guan Y., Hosni M.H., Jones B.W. and Gielda, T.P., Investigation of human thermal comfort under highly transient conditions for automotive applications—Part 1: experimental design and human subject testing implementation, ASHRAE Trans. 109, 885–897, 2003a.
  9. Guan Y., Hosni M.H., Jones B.W. and Gielda, T.P., Investigation of human thermal comfort under highly transient conditions for automotive applications—Part 2: thermal sensation modeling, ASHRAE Trans. 109, 898–907, 2003b.
  10. Guan Y., Hosni M.H., Jones B.W. and Gielda, T.P., 2003c. Literature review of the advances in thermal comfort modeling. ASHRAE Trans. 109, 908–916.
  11. Hodder S.G. and Parsons K., The effects of solar radiation on thermal comfort, International Journal of Biometeorology, Vol. 51, 233-250, 2007. ISO 9920 Ergonomics: Estimation of the Thermal Characteristics of a Clothing Ensemble, International Standards Organisation, Geneva, 1993.
  12. Jones B.W., Capabilities and limitations of thermal models for use in thermal comfort models, Energy and Buildings, 34, 653–659, 2002.
  13. Kaynakli O., Unver U. and Kilic M., Simulation of thermal comfort heating and cooling periods in an automobile compartment, Proceedings of the Automotive Technologies Congress, 24–26
  14. June, Bursa, Turkey, pp. 127–135 (in Turkish), 2002.
  15. Kaynakli O. and Kilic M., An inve