SavedAdd your journal

Journals / International Journal of Innovative Engineering Applications / 2021 / Cilt: 5 - Sayı: 2

Investigate of Microhardness and Microstructure of Ti-Ni-Nb-X (Ta and V) Shape Memory Alloys

Ti-Ni-Nb-X (Ta and V) Şekil Hatırlamalı Alaşımların Mikroyapısı ve Mikrosertliklerinin Araştırılması

Fethi DAĞDELEN
Esra BALCI
Pages
131–135
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The microhardness results shown that when V and Ta elements were added to SMAs, the microhardness of the alloys was significantly increased.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, based on designed Ti-50Ni, Ti-27Ni-23Nb, and Ti-27Ni-19Nb-4X (Ta and V) SMAs were prepared using arc melting.
📊
Key Findings & Data:The microhardness results shown that when V and Ta elements were added to SMAs, the microhardness of the alloys was significantly increased.
💡
Conclusion & Impact:By the addition of Ta into the Ti-Ni-Nb alloy, the microhardness value was enhanced to approximately 380HV, additionally, moreover, by adding Vanadium element to the ternary alloy, the microhardness was increased to about 500 HV.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:TiNiNbV · TiNiNbTa · Şekil hatırlamalaı alaşımlar

Abstract

In this study, based on designed Ti-50Ni, Ti-27Ni-23Nb, and Ti-27Ni-19Nb-4X (Ta and V) SMAs were prepared using arc melting. The microhardness and microstructure of the prepared alloys were examined. The optical microscope (OM) and Scanning Electron Microscopy (SEM) images can be noted that Nb, Ta, and V addition in substitution to nickel causes a change in the microstructure morphology of TiNi Shape Memory Alloy at room temperature. The microhardness results shown that when V and Ta elements were added to SMAs, the microhardness of the alloys was significantly increased. The microhardness value of equal atomic Ti-Ni SMA was found to 243 HV0.3. This value was determined to 354 HV0.3 in the Ti-27Ni-23Nb ternary SMA. By the addition of Ta into the Ti-Ni-Nb alloy, the microhardness value was enhanced to approximately 380HV, additionally, moreover, by adding Vanadium element to the ternary alloy, the microhardness was increased to about 500 HV.

Özet

Bu çalışmada hazırlanan Ti-50Ni, Ti-27Ni-23Nb, ve Ti-27Ni-19Nb-4X (Ta ve V) şekil hatırlamalı alaşımlar ark ergitme metodu kullanılarak oluşturuldu. Hazırlanan alaşımların mikrosertlik ve mikroyapıları incelendi. Optik mikroskop ( OM ) ve taramalı elektron mikroskop ( SEM ) görüntüleri, TiNi bazlı şekil hatırlamalı alaşımlara ilave olarak katkılanmış Ta, V ve Nb elementleri ile oda sıcaklığında alınan analizleri ile mikro yapı morfolojilerinde değişiklikler gözlendi. Mikrosertlik sonuçları, şekil hatırlamalı alaşımlara V ve Ta elementleri katkılandığında bu sonuçların değerini artırdığı tespit edilmiştir. Atomikçe eşit olan Ti-Ni ikili şekil hatırlamalı alaşımlarda bulunan mikrosertlik ölçüm sonucu 243 HV olarak bulundu. Bu değer Ti-27Ni-23Nb üçlü şekil hatırlamalı alaşımlar için 354 HV bulundu. Ti-Ni-Nb alaşımına Ta ilavesi ile mikrosertlik değeri yaklaşık 380 HV ye yükselmiştir. Ayrıca, üçlü şekil hatırlamalı alaşıma V elementi katkılanması sonucunda mikrosertlik ölçüm değeri 500 HV olmuştur

🔖

Cite This Article

DAĞDELEN, F., BALCI, E. (2022). Investigate of Microhardness and Microstructure of Ti-Ni-Nb-X (Ta and V) Shape Memory Alloys. International Journal of Innovative Engineering Applications, Cilt: 5 - Sayı: 2, 131–135. https://ajindex.com/articles/541215

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Stöckel, D., The shape memory effect-phenomenon, alloys and applications. Proceedings: Shape Memory Alloys for Power Systems EPRI, 1995. 1: p. 1-13
  2. Sathiya, P. and T. Ramesh, Experimental investigation and characterization of laser welded NiTinol shape memory alloys. Journal of Manufacturing Processes, 2017. 25: p. 253-261
  3. Jani, J.M., et al., A review of shape memory alloy research, applications and opportunities. Materials & Design (1980-2015), 2014. 56: p. 1078-1113
  4. Buehler, W.J., J.V. Gilfrich, and R. Wiley, Effect of low‐temperature phase changes on the mechanical properties of alloys near composition TiNi. Journal of applied physics, 1963. 34(5): p. 1475-1477
  5. Kauffman, G.B. and I. Mayo, The story of nitinol: the serendipitous discovery of the memory metal and its applications. The chemical educator, 1997. 2(2): p. 1-21
  6. Zhao, D., et al., Preparation and selective laser sintering of bamboo flour/copolyester composite and post-processing. Journal of Thermoplastic Composite Materials, 2017. 30(8): p. 1045-1055
  7. Richman, R., A. Rao, and D. Hodgson, Cavitation erosion of two NiTi alloys. Wear, 1992. 157(2): p. 401-407
  8. Kaya, I., et al., Shape memory behavior of [111]-oriented NiTi single crystals after stress-assisted aging. Acta Metallurgica Sinica (English letters), 2016. 29(3): p. 282-286
  9. Wu, S., H. Lin, and C. Yeh, A comparison of the cavitation erosion resistance of TiNi alloys, SUS304 stainless steel and Ni-based self-fluxing alloy. Wear, 2000. 244(1-2): p. 85-93
  10. Sui, J., et al., A study on NiTiNbCo shape memory alloy. Materials Science and Engineering: A, 2009. 508(1-2): p. 33-36
  11. Piao, M., S. Miyazaki, and K. Otsuka, Characteristics of deformation and transformation in Ti44Ni47Nb9 shape memory alloy. Materials Transactions, JIM, 1992. 33(4): p. 346-353
  12. Zhang, C., et al., Effects of deformation on the transformation hysteresis and shape memory effect in a Ni47Ti44Nb9 alloy. Scripta Metallurgica et Materialia, 1990. 24(9): p. 1807-1812
  13. Zhang, C., et al., The study of constitutional phases in a Ni47Ti44Nb9 shape memory alloy. Materials Chemistry and Physics, 1991. 28(1): p. 43-50
  14. He, X., et al., Temperature memory effect of Ni47Ti44Nb9 wide hysteresis shape memory alloy. Scripta materialia, 2005. 53(12): p. 1411-1415
  15. Otsuka, K. and C.M. Wayman, Shape memory materials. 1999: Cambridge university press
  16. Bradley, T.G., W.A. Brantley, and B.M. Culbertson, Differential scanning calorimetry (D