SavedAdd your journal

Journals / International Journal of Environment and Geoinformatics / 2021 / Cilt: 8 - Sayı: 1

Anode Performance of Sustainable, Hemp-derived, Flexible, Binder-free, CarbonFabrics in Lithium-Ion Batteries

Ozan TOPRAKCI
H. Aylin KARAHAN TOPRAKCI
Pages
28–32
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Electrochemical results showed that 800 °C is the optimum condition in terms of carbon yield and cell performance if the reversible capacity, cycling stability and rate capability values are considered.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Fabrication of sustainable products are of significance from many aspects recently.
📊
Key Findings & Data:While the stabilization step was performed at 220 °C for all samples, carbonization was carried out at 600, 700, 800 and 900 °C in order to optimize the carbonization process.
💡
Conclusion & Impact:Electrochemical results showed that 800 °C is the optimum condition in terms of carbon yield and cell performance if the reversible capacity, cycling stability and rate capability values are considered.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Fabrication of sustainable products are of significance from many aspects recently. Industrial hemp as one of the most sustainable, environment friendly plant can be used for many applications. In this study, various sustainable, hemp-derived, binder free, flexible anode materials were prepared by the two-step carbonization method. Plain woven hemp fabric was used as a starting material. Fabrication of hemp-derived anode materials were carried out in two steps known as stabilization and carbonization. While the stabilization step was performed at 220 °C for all samples, carbonization was carried out at 600, 700, 800 and 900 °C in order to optimize the carbonization process. Morphological, electrical and electrochemical characterization of the hemp-based carbon fabric anodes were carried out. Electrical resistance of the hemp-based carbon fabric anodes showed differences depending on the carbonization temperature. Electrochemical results showed that 800 °C is the optimum condition in terms of carbon yield and cell performance if the reversible capacity, cycling stability and rate capability values are considered.

🔖

Cite This Article

TOPRAKCI, O., TOPRAKCI, H. A. K. (2022). Anode Performance of Sustainable, Hemp-derived, Flexible, Binder-free, CarbonFabrics in Lithium-Ion Batteries. International Journal of Environment and Geoinformatics, Cilt: 8 - Sayı: 1, 28–32. https://ajindex.com/articles/540941

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., Bresser, D. (2020). The success story of graphite as a lithium-ion anode material – fundamentals, remaining challenges, and recent developments including silicon (oxide) composites. Sustainable Energy Fuels. Brosius, D. J. (2006). Natural fiber composites slowly take root. Composites Technology, 12(1), 32-37.
  2. Dumanlı, A. G., Windle, A. H. J. (2012). Carbon fibres from cellulosic precursors: a review. Journal of Materials Science, 47(10), 4236-4250.
  3. Guan, Z., Guan, Z., Li, Z., Liu, J., Yu, K. (2019). Characterization and Preparation of Nano-porous Carbon Derived from Hemp Stems as Anode for Lithium-Ion Batteries. Nanoscale Research Letters, 14(1), 1-9.
  4. Horne, M. R. (2020). Bast fibres: hemp cultivation and production. In Handbook of Natural Fibres (pp. 163- 196): Elsevier. Hossain, M. Z., Wu, W., Xu, W. Z., Chowdhury, M. B., Jhawar, A. K., Machin, D., Charpentier, P. A. (2018). High-surface-area mesoporous activated carbon from hemp bast fiber using hydrothermal processing. Journal of Carbon Research, 4(3), 38. Huang, X. (2009). Fabrication and properties of carbon fibers. Materials, 2(4), 2369-2403.
  5. Ishida, O., Kim, D.-Y., Kuga, S., Nishiyama, Y., Brown, R. M. J. C. (2004). Microfibrillar carbon from native cellulose. Cellulose, 11(3-4), 475-480.
  6. Kwon, J. H., Park, S. B., Ayrilmis, N., Oh, S. W., Kim, N. H. (2013). Effect of carbonization temperature on electrical resistivity and physical properties of wood and wood-based composites. Composites Part B: Engineering, 46, 102-107.
  7. Liu, S., Ge, L., Gao, S., Zhuang, L., Zhu, Z., Wang, H. (2017). Activated carbon derived from bio-waste hemp hurd and retted hemp hurd for CO2 adsorption. Composites Communication, 5, 27-30. Mijailović, D. M., Vukčević, M. M., Stević, Z. M., Kalijadis, A. M., Stojanović, D. B., Panić, V. V., Uskoković, P. S. (2017). Supercapacitive performances of activated highly microporous natural carbon macrofibers. Journal of The Electrochemical Society, 164(6), A1061. Rosas, J. M., Bedia, J., Rodríguez-Mirasol, J., Cordero, T. (2008). Preparation of hemp-derived activated carbon monoliths. Adsorption of water vapor. Ind. Eng. Chem. Res., 47(4), 1288-1296.
  8. Shi, Z., Yue, L., Wang, X., Lei, X., Sun, T., Li, Q. (2019). 3D mesoporous hemp-activated carbon/Ni3S2 in preparation of a binder-free Ni foam for a high performance all-solid-state asymmetric supercapacitor. Journal of Alloys and Compounds, 791, 665-673.
  9. Striebel, K. A., Sierr