Journals / International Journal of Automotive Science and Technology / 2022 / Cilt: 6 - Sayı: 1

A 0/1-Dimensional Numerical Analysis of Performance and Emission Characteristics of the Conversion of Heavy-Duty Diesel Engine to Spark-Ignition Natural Gas Engine

Pages
1–8
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

However, with the parametric studies in NG use, an improvement of 84.5% was achieved in NOX emission without any performance loss compared to diesel use.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Increasing air pollution has brought about the search for alternative fuels instead of conventional fuels.
📊
Key Findings & Data:In this study, it was aimed to minimize the dependence on petroleum-based fuels by enabling an existing compression ignition (CI) engine to operate with spark ignition with NG.
💡
Conclusion & Impact:However, with the parametric studies in NG use, an improvement of 84.5% was achieved in NOX emission without any performance loss compared to diesel use.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:compression ignition · Natural gas · Numerical simulation

Abstract

Increasing air pollution has brought about the search for alternative fuels instead of conventional fuels. It is aimed to make existing internal combustion engines work with alternative fuels with the least structural changes. Natural gas (NG) is one of the most recent alternative fuel studies because it is both cheaper and more environmen-tally friendly. In this study, it was aimed to minimize the dependence on petroleum-based fuels by enabling an existing compression ignition (CI) engine to operate with spark ignition with NG. For this reason, in heavy-duty diesel engine; It was modeled as 0/1-dimensional with spark plug assembly instead of diesel injector and low-pressure NG fuel injector mounted on the intake manifold. Afterwards, the perfor-mance, combustion characteristics, and emission values of the engine, which were converted to NG, were compared with the experimentally validated diesel model. In addition to the comparisons made under similar conditions, the effects of start of combustion (SOC) time and Air/Fuel (A/F) ratio changes in NG use were performed parametrically. In the same conditions, it was observed that the power, fuel con-sumption, and efficiency of the engine increased in NG fuel use compared to diesel fuel use. However, with the parametric studies in NG use, an improvement of 84.5% was achieved in NOX emission without any performance loss compared to diesel use.

🔖

Cite This Article

Aktas, F. (2022). A 0/1-Dimensional Numerical Analysis of Performance and Emission Characteristics of the Conversion of Heavy-Duty Diesel Engine to Spark-Ignition Natural Gas Engine. International Journal of Automotive Science and Technology, Cilt: 6 - Sayı: 1, 1–8. https://ajindex.com/articles/540411

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Liu J, Dumitrescu C E. 3D CFD simulation of a CI engine convert-ed to SI natural gas operation using the G-equation. Fuel, 2018;232: 833-844
  2. Reitz RD, Ogawa H, Payri R, Fansler T, Kokjohn S, Moriyoshi Y, Zhao H. The future of the internal combustion engine. International Journal of Engine Research, 2019;21: 3-10
  3. BP Magazine 2020. Statistical Review of World Energy. 2020;69th edition
  4. Özer S, Bahtiyar B. Investigation of the Effects of Liquid LPG Use in a Gasoline Injection Turbocharged Engine. Int J Automot Sci Technol 2021;5:172–8.
  5. Reyes M, Tinaut FV, Giménez B, Pérez A. Characterization of cycle-to-cycle variations in a natural gas spark ignition engine. Fuel, 2015;140: 752-761
  6. Liu J, Bommisetty HK, Dumitrescu C E. Experimental Investiga-tion of a Heavy-Duty Compression-Ignition Engine Retrofitted to Natural Gas Spark-Ignition Operation. Journal of Energy Re-sources Technology, 2019;141: 11-23
  7. U.S. Energy Information Administration, [Online]. Available: https://www.eia.gov/energyexplained/?page=us_energy_transportation [Accessed: 24/6/2021]
  8. Liu J, Dumitrescu CE. Combustion partitioning inside a natural gas spark ignition engine with a bowl-in-piston geometry. Energy Conversion and Management, 2019;183: 73-83
  9. Liu J, Szybist J, Dumitrescu C. Choice of Tuning Parameters on 3D IC Engine Simulations Using G-Equation. SAE Technical Pa-per. 2018-01-0183
  10. Yontar AA, Doğu Y. Experimental and numerical investigation of effects of CNG and gasoline fuels on engine performance and emissions in a dual sequential spark ignition engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2018;40: 2176-2192
  11. Liu J, Dumitrescu CE. Flame development analysis in a diesel optical engine converted to spark ignition natural gas operation. Applied Energy, 2018;230: 1205-1217
  12. Stocchi I, Liu J, Dumitrescu CE, Battistoni M, Grimaldi CN. Effect of Piston Crevices on the Numerical Simulation of a Heavy-Duty Diesel Engine Retrofitted to Natural-Gas Spark-Ignition Op-eration. Journal of Energy Resources Technology, 2019;141: 11-19
  13. Liu J, Dumitrescu CE. Methodology to separate the two burn stages of natural-gas lean premixed-combustion inside a diesel ge-ometry. Energy Conversion and Management, 2019;195: 21-31
  14. Ambrogi L, Liu J, Battistoni M, Dumitrescu C, Gasbarro, L. CFD Investigation of the Effects of Gas’ Methane Number on the Per-formance of a Heav