SavedAdd your journal

Journals / International Journal of 3D Printing Technologies and Digital Industry / 2022 / Cilt: 6 - Sayı: 2

FUNCTIONALIZATION OF WOVEN FABRICS BY 3D PRINTED STRUCTURES IN FUSED FILAMENT FABRICATION (FFF): EFFECTS OF INFILL PATTERNS ON TENSILE STRENGTH

Murat DEMİR
Pages
329–337
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results showed that greater adhesion between 3D parts and fabrics were obtained for plain-woven fabrics.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Three-dimensional (3D) printing has an increasing popularity in recent years with easy availability and the wide range of applications in many fields.
📊
Key Findings & Data:While producing textile-like structures with 3D technology is still a challenging problem, combining textiles with 3D printed structures enables the manufacture of many alternative structures in the field of textile applications.
💡
Conclusion & Impact:Results showed that greater adhesion between 3D parts and fabrics were obtained for plain-woven fabrics.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:3D printing · woven fabrics · additive manufacturing

Abstract

Three-dimensional (3D) printing has an increasing popularity in recent years with easy availability and the wide range of applications in many fields. While producing textile-like structures with 3D technology is still a challenging problem, combining textiles with 3D printed structures enables the manufacture of many alternative structures in the field of textile applications. This study investigates the effect of 3D parts with different infill patterns printed onto the cotton woven fabric for tensile strength. For this purpose, 3D parts with concentric, grid and triangle infill patterns were printed onto plain and twill woven fabrics with polylactic acid (PLA) filaments in the Fused Filament Fabrication technique. Adhesion between fabric and 3D parts and tensile strengths of produced structures were measured to assess the effectiveness of 3D printing. Results showed that greater adhesion between 3D parts and fabrics were obtained for plain-woven fabrics. The infill patterns were also found effective for the tensile strength performance.

🔖

Cite This Article

DEMİR, M. (2022). FUNCTIONALIZATION OF WOVEN FABRICS BY 3D PRINTED STRUCTURES IN FUSED FILAMENT FABRICATION (FFF): EFFECTS OF INFILL PATTERNS ON TENSILE STRENGTH. International Journal of 3D Printing Technologies and Digital Industry, Cilt: 6 - Sayı: 2, 329–337. https://ajindex.com/articles/539734

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Sitotaw, D.B., Ahrendt, D., Kyosev, Y. and Kabish, A.K., “Additive manufacturing and textiles-state-of-the-art”, Applied Sciences, Vol.10, Issue 15, Pages 1-22, 2020
  2. American Society of Testing and Materials, “Guide for additive manufacturing-design-directed energy deposition” (Standard N: ASTM F3413-19, 2019
  3. Goncu-Berk, G., Karacan, B. and Balkis, I., “Embedding 3D printed filaments with knitted textiles: investigation of bonding parameters”, Clothing and Textiles Research Journal, Vol. 40, Issue 3, Pages 171-186, 2020
  4. Chakraborty, S. and Biswas, M.C., “3D printing technology of polymer-fiber composites in textile and fashion industry: A potential roadmap of concept to consumer”, Composite Structures, Vol. 248, Pages 1-14, 2020
  5. Chakraborty, S. and Biswas, M.C., “Fused deposition modelling 3D printing technology in textile and fashion ındustry: materials and innovation” Modern Concepts in Material Science Vol. 2, Issue1, Pages 1-5,2019
  6. Sabantina, L., Kinzel, F. and Ehrmann, A., Finsterbusch, K., “Combining 3D printed forms with textile structures –mechanical and geometrical properties of multi-material systems”, IOP Conference Series: Materials Science and Engineering, Vol. 87, Issue 1, Pages 1-5, 2015
  7. Korger, M., Bergschneider, J., Lutz, M., Mahltig, B., Finsterbusch, K. and Rabe, M., “Possible applications of 3D printing technology on textile substrates”, IOP Conference Series: Materials Science and Engineering, Vol. 141, Issue 1, Pages 1-6, 2016
  8. Ahrendt, D., Karam, A.R. and Krzywinski, S., “CAE-supported process for additive manufacturing of orthopaedic devices”, International Textile Conference, Pages 28-29, Dresden, 2019
  9. Spahiu, T., Canaj, E. and Shehi, E., “3D printing for clothing production”, Journal of Engineered Fibers and Fabrics, Vol. 15, Pages 1-8, 2020
  10. Korger, M., Glogowsky, A., Sanduloff, S., Steinem, C., Huysman, SW., Horn, B., Ernst, M. and Rabe, M.,“Testing thermoplastic elastomers selected as flexible three-dimensional printing materials for functional garment and technical textile applications”, Journal of Engineered Fibers and Fabrics, Vol. 15, Pages 1-10, 2020
  11. Melnikova, R., Ehrmann, A. and Finsterbusch, K., “3D printing of textile-based structures by fused deposition modelling (FDM) with different polymer materials”, IOP Conference Series: Materials Science and Engineering, Vol. 62, Issue 1, Pages 1-7, 2014
  12. Grothe, T., Brockhagen, B. and Storck, J.L., “Three-dimensional printing resin