SavedAdd your journal

Journals / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2017 / Cilt: 7 - Sayı: 4

Havuz Kaynama Şartlarında Su-bazlı Cerium Oksit Nano-süspansiyonunun Termal Davranışı

Thermal Behavior of Aqueous Cerium Oxide Nano-Suspension under the Pool Boiling Conditions

Doğan ÇİLOĞLU
Pages
181–188
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Also, the results show that the critical heat flux for cerium oxide nanofluid having 0.1 vol.% nanoparticle concentration improves up to 103% compared with the deionized water

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The present paper focuses on an experimental study of pool boiling characteristics of cerium oxide (CeO, ceria) nano-suspension on a horizontal flat copper surface at atmospheric pressure.
📊
Key Findings & Data:The nanofluid suspension is prepared by a two-step method and stabilized using Na-citrate, pH setting and ultrasonic vibration as well.
💡
Conclusion & Impact:Also, the results show that the critical heat flux for cerium oxide nanofluid having 0.1 vol.% nanoparticle concentration improves up to 103% compared with the deionized water
🔬Design:Lab & Field Experiment
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The present paper focuses on an experimental study of pool boiling characteristics of cerium oxide (CeO, ceria) nano-suspension on a horizontal flat copper surface at atmospheric pressure. The nanofluid suspension is prepared by a two-step method and stabilized using Na-citrate, pH setting and ultrasonic vibration as well. The effect of applied heat flux to the boiling surface on pool boiling heat transfer coefficient (HTC) of cerium oxide nanofluid is experimentally examined and briefly discussed. The results illustrate that the pool boiling HTC increases with using cerium oxide nanofluid as working fluid. Also, the results show that the critical heat flux for cerium oxide nanofluid having 0.1 vol.% nanoparticle concentration improves up to 103% compared with the deionized water

Özet

Bu çalışma, atmosfer basıncı altında yatay bir bakır plaka üzerinde cerium oksit (CeO, ceria) nanosüspansiyonunun havuz kaynama karakteristiklerinin deneysel olarak incelenmesi üzerine gerçekleştirilmiştir. Nano akışkan süspansiyonu iki adım metodu ile hazırlanmıştır ve Na-citrate ilavesi, pH ayarı ve ultrasonik titreşim uygulanarak kararlı hale getirilmiştir. Cerium oksit nano akışkanının havuz kaynama ısı transfer katsayısı üzerine kaynama yüzeyine uygulanan ısı akısının etkisi deneysel olarak incelenmiş ve sonuçlar tartışılmıştır. Deneysel sonuçlar, iş yapan akışkan olarak cerium oksit nano akışkanının kullanılması ile havuz kaynama ısı transfer katsayısının arttığını göstermiştir. Ayrıca elde edilen sonuçlar, de-iyonize su ile karşılaştırıldığında, %0.1 hacimsel konsantrasyona sahip cerium oksit nano akışkanı için kritik ısı akısında %103 artış olduğunu göstermiştir

🔖

Cite This Article

ÇİLOĞLU, D. (2022). Havuz Kaynama Şartlarında Su-bazlı Cerium Oksit Nano-süspansiyonunun Termal Davranışı. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 7 - Sayı: 4, 181–188. https://ajindex.com/articles/538584

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Ahmed O, Hamed MS, 2012. Experimental investigation of the effect of particle deposition on pool boiling of nanofluids. Int. J. Heat Mass Transf., 55: 3423-3436.
  2. Alayli GA, Demir Y, Demir N, 2008. Purification of peroxidase from latex of Euphorbia (Euphorbia amygdaloides) and investigation of kinetic properties. Asian J. Chem., 20: 477-482.
  3. Bang IC, Chang SH, 2005. Boiling heat transfer performance and phenomena of Al2 O3 -water nano-fluids from a plain surface in a pool. Int. J. Heat Mass Transfer, 48: 2407-2419.
  4. Barton LE, Auffan M, Bertrand M, Barakat M, Santaella C, Masion A, Borschneck D, Olivi L, Roche N, Wiesner MR, Bottero JY, 2014. Transformation of pristine and citrate-functionalized CeO2 nanoparticles in a laboratory-scale activated sludge reactor. Environ. Sci. Technol., 48: 7289-7296.
  5. Bindhu MR, Umadevi M, 2013. Synthesis of monodispersed silver nanoparticles using Hibiscus cannabinus leaf extract and its antimicrobial activity. Spectrochim. Acta Part A: Mol. Biomol. Spectrosc., 101: 184-190.
  6. Buchanan JL, Turner PR, 1992. Numerical Methods and Analysis. McGraw-Hill, New York. Cicek S, Gungor AA, Adiguzel A, Nadaroglu H, 2015. Biochemical evaluation and green synthesis of nano silver using peroxidase from Euphorbia (Euphorbia amygdaloides) and its antibacterial activity. J. Chem., 486948: 7. Ciloglu D, 2017. An experimental investigation of nucleate pool boiling heat transfer of nanofluids from a hemispherical surface. Heat Transfer Eng., http://dx.doi.org/10.1080/01457632.2016.1212571.
  7. Ciloglu D, Bolukbasi A, 2015. A comprehensive review on pool boiling of nanofluids. Applied Thermal Engineering, 84: 45-63.
  8. Ciloglu D, Bolukbasi A, Cifci H, 2015. Experimental investigation of pool boiling heat transfer in nanofluids around spherical surfaces. Journal of the Faculty of Engineering and Architecture of Gazi University, 30: 405-415.
  9. Collin B, Auffan M, Johnson AC, Kaur I, Keller AA, Lazareva A, Lead JR, Ma X, Merrifield RC, Svendsen C, White JC, Unrine J.M., 2014. Environmental release, fate and ecotoxicological effects of manufactured ceria nanomaterials. Environ. Sci.: Nano, 1: 533-548.
  10. Harish G, Emlin V, Sajith V, 2011. Effect of surface particle interactions during pool boiling of nanofluids. Int. J. Therm. Sci., 50: 2318-2327. Herna´ndez BA, Gonza´lez R, Viesca JL, Ferna´ndez JE, Di´az FJM, Machado A, Chou R, Riba J, 2008.
  11. CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants. Wear, 265: 422-428.
  12. Keller A, McFerran S, Lazareva