SavedAdd your journal

Journals / Gazi University Journal of Science / 2018 / Cilt: 31 - Sayı: 3

Optimization of Cutting Parameters in Drilling AISI P20 Die Mold Steel with Taguchi and GRA Methods

Mehmet SÜZGÜNOL
Yunus KAYIR
Pages
898–910
Publication Date
2022-10-19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Moreover, maximumcutting speed (17 m/min) and minimum feed rate (0.1 mm/rev) were optimum cuttingparameters.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:AISI P20 mold steels are widely used to manufacture die molding for plastic parts.
📊
Key Findings & Data:In thisarticle, AISI P20 steel was drilled by using uncoated HSS twist drills.
💡
Conclusion & Impact:Moreover, maximumcutting speed (17 m/min) and minimum feed rate (0.1 mm/rev) were optimum cuttingparameters.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

AISI P20 mold steels are widely used to manufacture die molding for plastic parts. In thisarticle, AISI P20 steel was drilled by using uncoated HSS twist drills. In drilling process, Ø8mm drill bit, three cutting speed (v:10, 13 and 17 m/min) and three feed rate (f: 0.1, 0.2 and 0.3mm/rev), and pecking drilling method were used. Taguchi L9 model was performed to designthe drilling tests. Cutting forces and torque were measured by a dynamometer in during theexperiments. The surface roughness and diameter of drilled holes were checked. Taguchi andANOVA analyses were done to determine effects of cutting parameters on the experimentalresults. Grey Relation Analysis (GRA) was used to optimize results of the tests. The resultsshowed that the feed rate was the main effective factor on test results. Moreover, maximumcutting speed (17 m/min) and minimum feed rate (0.1 mm/rev) were optimum cuttingparameters.

🔖

Cite This Article

SÜZGÜNOL, M., KAYIR, Y. (2022). Optimization of Cutting Parameters in Drilling AISI P20 Die Mold Steel with Taguchi and GRA Methods. Gazi University Journal of Science, Cilt: 31 - Sayı: 3, 898–910. https://ajindex.com/articles/521442

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Songmene, V., “Machinability testing of mould steels”, Industrial Research, 5: 12-17, (1999).
  2. Le Calvez C., Poulachon G., Coulon B., Ponsot A., Dessoly M., Moisan A., Rec J., “Gains achieved by using new generations of plastic injection mold steels.” CIRIP Annals, 52: 69-72, (2003).
  3. Rech, J., “A new approach for the characterization of machinability application to steels for plastic injection moulds”, Journal of Materials Processing Technology, 152: 66–70, (2004).
  4. Thompson S., Handbook of mould, tool and die repair welding, William Andrew Publishing, London, (1999). Vedani M., “Microstructural evolution of tool steels after Nd-YAG laser repair welding,” J. Mater. Sci., Milan, 39: 241–249, (2004).
  5. Wilson, P., ve Carlos, E., “Repair welding of polymer injection moulds manufactured in AISI P20 and VP50IM steels.”, Journal of Materials Processing Technology, 179: 244–250, (2006).
  6. Ateş, S., “The effect of feed rate on tool life and surface roughness in milling AISI P20 with CBN cutting tools”, Research & Development, 5-8, (2009).
  7. Luis, A. and Helleno Schützer, K., “Investigation of tool path interpolation on the manufacturing of die and molds with HSC technology”, Journal of Materials Processing Technology, 179: 178–184, (2006).
  8. Fallböhmer, B., ve Rodriguez, A., “High-speed machining of cast iron and alloy steels for die and mould manufacturing”, Journal of Materials Processing Technology, 98: 104-115, (2000). Süzgünol M. and Kayır Y., “Machinability of the DIN 1.2311 and 1.2738 alloy Steel”, 3th National Metal Cutting and Machining Symposium, Ankara, (2012).
  9. Köse, S., “Investigation of hardenability of AISI/SAE 1040-2738-304 Alloy steels with jominy test” Master Thesis, Afyon Kocatepe University Institute of Science and Technology, Afyon, (2008).
  10. Köse, S., Said, G., Günes, Erdogan, M., “The Investigation of the hardening ability of AISI 1040- 2738 Steels with Jominy Test”, IMSP 12th International Materials Symposium, 64-72,
  11. Denizli, Turkey, (2008).
  12. Hossein, A. ve Kadirgama, K., “Prediction of cutting force in end-milling operation of modified AISI P20 tool steel”, 2nd National CAD/CAM and Analysis Conference, 4-8, (2010).
  13. Kayır Y., Aslan S. and Aytürk A., “Analysing the Effects of Cutting Tools Geometry on Turning of AISI 316 Ti Stainles Steel with Taguchi Method”, Journal of the Faculty of Engineering and Architecture of Gazi University, 28: 363-372, (2013).
  14. Kivak, M., ve Çakir, O., “Examination of machining parameters on surface roughness in EDM of tool stee