Journals / Fırat Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2005 / Cilt: 17 - Sayı: 4

Bituminous percent determination of compressed asphalt concrete

Sıkıştırılmış asfalt betonun bitüm yüzdesinin tayini

Pages
693–698
Publication Date
2022-10-17
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Experimental results of the two methods show that the greatest change of gradation of aggregates were occured between 1.18 mm and 2.36 mm sieves.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, extraction experiment of asphalt concrete specimens prepared according to Marshall and Superpave Design Methods was made.
📊
Key Findings & Data:Extraction experiment was applied to the compressed specimens in research laboratory of the 8.
💡
Conclusion & Impact:Experimental results of the two methods show that the greatest change of gradation of aggregates were occured between 1.18 mm and 2.36 mm sieves.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, extraction experiment of asphalt concrete specimens prepared according to Marshall and Superpave Design Methods was made. Specimens were prepared with both additive and non additive bituminous. Extraction experiment was applied to the compressed specimens in research laboratory of the 8. Local Directore of Highways. Experimental results of the two methods show that the greatest change of gradation of aggregates were occured between 1.18 mm and 2.36 mm sieves.

Özet

Bu çalışmada Marshall ve Superpave Tasarım Metodları'na göre hazırlanmış asfalt beton numunelerinin ekstraksiyonu yani ayrıştırma deneyi yapılmıştır. Numuneler hem katkısız hem de katkılı bitümle hazırlanmıştır. Sıkıştırılmış numunelere daha sonra Karayolları 8. Bölge Müdürlüğü Araştırma Laboratuvarı'nda ayrıştırma deneyi uygulanmıştır. Deney sonucunda her iki metod için agrega gradasyonu bakımından en büyük farklılık 1.18 mm ile 2.36 mm elekler arasında olmuştur.

🔖

Cite This Article

NAMLI, R. (2022). Bituminous percent determination of compressed asphalt concrete. Fırat Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 17 - Sayı: 4, 693–698. https://ajindex.com/articles/513571

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. E.T. Al, Asphalt Institute Handbook, 1996. 2.J. McGraw, D. Iverson, G. Schmidth, J. Olson, Selection of An Alternative Asphalt Extraction Solvent, 23 s., 2001 3.J. McGraw, D. Iverson, G. Schmidt, J. Olson, Selection of an Alternative Asphalt Extraction Solvent, Minnesota Department of Transportation Office of Materials and Road Research, 3-23 s., 2001 4.Summary of Final Report, Evaluation of an Alternative Solvent for Extraction of Asphalt to Reduce Health Hazards, BB-881,2000 5.A.F. Keçeciler, G. Akkol, A. Gümrükçüoğlu, A.F. Gökçe, Bitümlü Malzemeler Laboratuar El Kitabı, K.G.M. Matbaası, Ankara, 37-57 s., 1979