Journals / Fırat Tıp Dergisi / 2022 / Cilt: 27 - Sayı: 2

Evaluation of Repair Bond Strenght of Different Repair Methods and Systems to Zirconia Based Ceramics

Zirkonya Esaslı Seramiklerin Tamir Bağlanma Dayanımlarının Farklı Tamir Yöntemleri ve Sistemleri Kullanılarak Değerlendirilmesi

Pages
131–139
Publication Date
2022-10-18
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results: Clearfil and Cimara Zircon systems significantly increased the bond strength for composite resin method when compared with the Bisco system (respectively p

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Objective: The purpose of this study is to evaluate the bond strength of different repair systems by using composite resin and ceramic cementation repair methods to zirconia-based ceramics.
📊
Key Findings & Data:Material and Method: All-ceramic blocks (IPS Empress II; Ivoclar Vivadent, Schaan, Liechtenstein) sized 4.00 mm in length, 5.4 mm in width, and 3.00 mm in height were fabricated by dental laboratory as thirty specimens.
💡
Conclusion & Impact:Results: Clearfil and Cimara Zircon systems significantly increased the bond strength for composite resin method when compared with the Bisco system (respectively p
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Objective: The purpose of this study is to evaluate the bond strength of different repair systems by using composite resin and ceramic cementation repair methods to zirconia-based ceramics. Material and Method: All-ceramic blocks (IPS Empress II; Ivoclar Vivadent, Schaan, Liechtenstein) sized 4.00 mm in length, 5.4 mm in width, and 3.00 mm in height were fabricated by dental laboratory as thirty specimens. CAD/CAM zirconia blocks (n =40) (Prozir; SeramDent, Turkey) sized 5.00 mm in length, 5.4 mm in width and 13.0 mm in height by CEREC System were fabricated from fully sintered Y-TZP core. Zirconia specimens were randomly divided into seven groups for the following different intraoral repair systems(Clearfil, Cimara Zircon, Bisco) and a control group. Every ten specimens were repaired as same sized. Control group was fabricated by conventional firing as unbroken solid zirconia ceramic samples. Each specimen underwent 5000 cycles of thermocycling. The SBSt (Shear bond strength test) was performed by loading force on the repaired piece to record load-to-failure. Failure mode was evaluated using a digital microscope and SEM. SBSt data were analyzed using one-way ANOVA and Tukey’s HSD test. Results: Clearfil and Cimara Zircon systems significantly increased the bond strength for composite resin method when compared with the Bisco system (respectively p

Özet

sistemlerinin bağlanma dayanımını değerlendirmektir. Gereç ve Yöntem: 4.00 mm boyunda, 5.4 mm eninde ve 3.00 mm yüksekliğinde tam seramik bloklar (IPS Empress II; Ivoclar Vivadent, Schaan, Lihtenştayn), dental laboratuarda otuz adet olarak üretilmiştir. CEREC Sistemi ile 5.00 mm uzunluğunda, 5.4 mm genişliğinde ve 13.0 mm yüksekliğinde yetmiş (n=40) CAD/CAM zirkonya blok(Prozir; SeramDent, Türkiye) tamamen sinterlenmiş Y-TZP çekirdeğinden üretilmiştir. Zirkonya örnekleri farklı ağız içi tamir sistemleri (Clearfil, Cimara Zircon, Bisco) ve bir kontrol grubu olarak rastgele yedi gruba ayrıldı. Her on numune aynı boyutta tamir edilmiştir. Kontrol grubu, kırılmamış katı zirkonya seramik numuneleri olarak geleneksel fırınlama ile üretilmiştir. Her numuneye 5000 termal döngü uygulandı. SBSt (Kesme bağ mukavemeti testi), yüklemeden kopma oluncaya kadar olan durumu kaydetmek için onarılan parçaya kuvvet uygulanarak gerçekleştirilmiştir. Başarısızlık tipi, bir dijital mikroskop ve SEM kullanılarak değerlendirildi. SBSt verileri, tek yönlü ANOVA ve Tukey'in HSD testi kullanılarak analiz edildi. Bulgular: Clearfil ve Cimara Zircon sistemleri, Bisco sistemi ile karşılaştırıldığında kompozit rezin yöntemi için bağlanma gücünü önemli ölçüde artırdı (sırasıyla p

🔖

Cite This Article

ALTINTAŞ, E., AYNA, E., İZGİ, A. D. (2022). Evaluation of Repair Bond Strenght of Different Repair Methods and Systems to Zirconia Based Ceramics. Fırat Tıp Dergisi, Cilt: 27 - Sayı: 2, 131–139. https://ajindex.com/articles/513382

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Burke FJ, Crisp RJ, Cowan AJ, Lamb J, Thompson O, Tulloch N. Five-year clinical evaluation of zirconia-based bridges in patients in UK general dental practices. J Dent 2013; 41: 992- 9
  2. Guess PC, Kulis A, Witkowski S, Wolkewitz M, Zhang Y, Strub JR. Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater 2008; 24: 1556-67
  3. Cristoforides P, Amaral R, May LG, Bottino MA, Valandro LF. Composite resin to yttria stabilized tetragonal zirconia polycrystal bonding: comparison of repair methods. Oper Dent 2012; 37: 263-71
  4. Thompson JY, Stoner BR, Piascik JR, Smith R. Adhesion/cementation to zirconia and other nonsilicate ceramics: where are we now? Dent Mater 2011; 27: 71-82
  5. Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 2013; 29: 419-26
  6. Ustun O, Buyukhatipoglu IK, Secilmis A. Shear Bond Strength of Repair Systems to New CAD/CAM Restorative Materials. J Prosthodont 2018; 27: 748-54
  7. Tan K, Pjetursson BE, Lang NP, Chan ES. A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years: III. Conventional FPDs. Clin Oral Implants Res 2004; 15: 654-66
  8. Sailer I, Pjetursson BE, Zwahlen M, Hämmerle CH. A systematic review of the survival and complication rates of all ceramic and metal– ceramic reconstructions after an observation period of at least 3 years. Part II: fixed dental prostheses. Clin Oral Implants Res 2007; 18: 86-96
  9. Lorente MC, Scherrer SS, Richard J, Demellayer R, Amez-Droz M, Wiskott HA. Surface roughness and EDS characterization of a Y-TZP dental ceramic treated with the CoJet™ Sand. Dent Mater 2010; 26: 1035-42
  10. Comlekoglu M, Dundar M, Özcan M, Gungor M, Gokce B, Artunc C. Influence of cervical finish line type on the marginal adaptation of zirconia ceramic crowns. Oper Dent 2009; 34: 586-92
  11. Fischer J, Grohmann P, Stawarczyk B. Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites. Dent Mater J 2008; 27: 448-54
  12. Inokoshi M, Kameyama A, De Munck J, Minakuchi S, Van Meerbeek B. Durable bonding to mechanically and/or chemically pre-treated dental zirconia. J Dent 2013; 41: 170-9
  13. Kokubo Y, Tsumita M, Kano T, Fukushima S. The influence of zirconia coping designs on the fracture load of all-ceramic molar crowns. Dent Mater J 2011; 30: 281-5
  14. Lughi V