SavedAdd your journal

Journals / European Mechanical Science / 2018 / Cilt: 2 - Sayı: 1

Analysis and Joining of Al–Cu Plates Using Friction-Stir Welding Technique

Ahmet ÇAKAN
Mustafa UĞURLU
Hatice ATMACA
Pages
1–8
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The effects of tool rotational speeds on plate temperatures were determined using such welding parameters of three tool rotational speeds of 660, 920 and 1500 rpm at a constant welding speed of 32 mm/min.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The scope of the study focused on tool speeds-plate temperatures at joining aluminium alloy and copper plates.
📊
Key Findings & Data:The AA7075-T6 aluminium alloy and pure copper were welded using friction-stir welding (FSW) technique.
💡
Conclusion & Impact:The effects of tool rotational speeds on plate temperatures were determined using such welding parameters of three tool rotational speeds of 660, 920 and 1500 rpm at a constant welding speed of 32 mm/min.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Welding · joining · friction

Abstract

The scope of the study focused on tool speeds-plate temperatures at joining aluminium alloy and copper plates. The AA7075-T6 aluminium alloy and pure copper were welded using friction-stir welding (FSW) technique. The temperature variations of plates from stirred zone were detected using thermocouples installed at equal distance on both sides of the axis of the pin linear displacement. The temperature distribution in the surroundings of the welded zone was investigated. The effects of tool rotational speeds on plate temperatures were determined using such welding parameters of three tool rotational speeds of 660, 920 and 1500 rpm at a constant welding speed of 32 mm/min.

🔖

Cite This Article

ÇAKAN, A., UĞURLU, M., ATMACA, H. (2022). Analysis and Joining of Al–Cu Plates Using Friction-Stir Welding Technique. European Mechanical Science, Cilt: 2 - Sayı: 1, 1–8. https://ajindex.com/articles/512493

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Khan N.Z., Siddiquee A.N., Khan Z.A. and Mukhopadhyay A.K., (2017) "Mechanical and microstructural behavior of friction stir welded similar and dissimilar sheets of AA2219 and AA7475 aluminium alloys", Journal of Alloys and Compounds,Vol: 695, pp.2902-2908
  2. Cam G.,Gucluer S., Cakan A. and Serindag H.T., (2009) "Mechanical properties of friction stirbutt-welded Al-5086 H32 plate", Materialwissenschaft und Werkstofftech, Vol:40, pp.638-642
  3. Shojaei Zoeram A., Mousavi Anidjan S.H., Jafarianb H.R. and Bhattacharjee T., (2017) "Welding parameters analysis and microstructural evolution of dissimilar joints in Al/Bronze processed by friction stir welding and their effect on engineering tensile behavior", Materials Science & Engineering A, Vol:687, pp.288–297
  4. Mehta K. P. and Badheka V. J., (2016) "A review on dissimilar friction stir welding of copper to aluminum: process, properties, and variants", Materials and Manufacturing Processes, Vol:31, pp.233–254
  5. Dorbane A., Mansoor B., Ayoub G., Shunmugasamy V.C. and Imad A., (2016) "Mechanical, microstructural and fracture properties of dissimilar welds produced by friction stir welding of AZ31B and Al6061", Materials Science & Engineering A, Vol:651, pp.720–733
  6. Lee W.B., Schmuecker M., Mercardo U.A., Biallas G. and Jung S.B., (2006) "Interfacial reaction in steel-aluminum joints made by friction stir welding", Scripta Materialia, Vol:55, pp.355–358
  7. Lambrakos S.G., Fonda R.W., Milewski J.O. and Mitchell J.E., (2003) "Analysis of friction stir welds using thermocouple measurements", Science and Technology of Welding and Joining, Vol:8(5), pp.385–390
  8. Al-Roubaiy A. O., Nabat S. M. and Batako A.D. L., (2014) "Experimental and theoretical analysis of friction stir welding of Al–Cu joints",The International Journal of Advanced Manufacturing Technology, Vol:71, pp.1631–1642
  9. Song M. and KovacevicR., (2003) "Thermal modeling of friction stirwelding in a moving coordinate system and its validation", International Journal of Machine Tools and Manufacture, Vol:43, pp.605–615
  10. Chao Y. J., Asme M., X. Qi. and Tang W., (2003) "Heat Transfer in Friction Stir Welding-Experimental and Numerical Studies", Journal of Manufacturing Science and Engineering, Vol:125, pp.138-145
  11. Verma S, Meenu, Misra J P., "Study on temperature distribution during Friction Stir Welding of 6082 aluminum alloy", 5th International Conference of Materials Processing and Characterization: Materials Today. Proce