Journals / European Mechanical Science / 2019 / Cilt: 3 - Sayı: 4

Gray based Fuzzy Gain-Scheduling PID Controller Design for AirFuel System Under Variable Engine Operating Conditions

Pages
125–132
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results, Gray GS_PID is more powerfulthan optimally adjusted PID in terms of reducing the amount of deviation of AFR from stoichiometric valueunder variable engine operating conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the problem of regulation of air-fuel ratio (AFR) in gasoline engines under different engine operatingconditions is discussed.
📊
Key Findings & Data:Then,two different approaches named with classical proportional-integral-derivative (PID) and a fuzzy logic gainscheduling PID controller combined with gray system modelling approach (Gray GS-PID)have been used toimprove the performance of the engine to monitor stoichiometric conditions.
💡
Conclusion & Impact:According to the results, Gray GS_PID is more powerfulthan optimally adjusted PID in terms of reducing the amount of deviation of AFR from stoichiometric valueunder variable engine operating conditions.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the problem of regulation of air-fuel ratio (AFR) in gasoline engines under different engine operatingconditions is discussed. Firstly, the mean value mathematical model of the AFR system has been created. Then,two different approaches named with classical proportional-integral-derivative (PID) and a fuzzy logic gainscheduling PID controller combined with gray system modelling approach (Gray GS-PID)have been used toimprove the performance of the engine to monitor stoichiometric conditions. The parameters of classical PIDparameters are determined by the pattern search algorithm. The design procedures for both controllers havebeen presented in detail. In order to evaluate the performance analysis for both of the proposed controllers,variable conditions were established based on engine speed and throttle opening ratios in the US06 and UDDSdriving conditions and validated by simulation results. According to the results, Gray GS_PID is more powerfulthan optimally adjusted PID in terms of reducing the amount of deviation of AFR from stoichiometric valueunder variable engine operating conditions. The most important contribution of this study is that, unlikeconventional AFR regulation, the prediction of future error value relative to the previous AFR error values usingthe gray prediction algorithm, and the design of the control algorithm that determines the control action for thenext step depending on the predicted error value before the error occurs and sets the gain parameters.

🔖

Cite This Article

KALELİ, A. (2022). Gray based Fuzzy Gain-Scheduling PID Controller Design for AirFuel System Under Variable Engine Operating Conditions. European Mechanical Science, Cilt: 3 - Sayı: 4, 125–132. https://ajindex.com/articles/512457

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Manzie, C., Palaniswami, M., Ralph, D., Watson, H., Yi, X., (2002). Model Predictive Control of a Fuel Injection System with a Radial Basis Function Network Observer. Journal of Dynamic Systems, Measurement, and Control, Doi: 10.1115/1.1515328
  2. Franceschi, E.M., Muske, K.R., Peyton Jones, J.C., Makki, I., (2007). An Adaptive Delay-Compensated PID Air Fuel Ratio Controller, Doi:
  3. Pace, S., Zhu, G.G., (2014). Transient air-to-fuel ratio control of an spark ignited engine using linear quadratic tracking. Journal of Dynamic Systems, Measurement, and Control 136(2): 21008
  4. Ebrahimi, B., Tafreshi, R., Masudi, H., Franchek, M., Mohammadpour, J., Grigoriadis, K., (2012). A parameter-varying filtered PID strategy for air-fuel ratio control of spark ignition engines. Control Engineering Practice 20(8): 805–15, Doi: 10.1016/j.conengprac.2012.04.001
  5. Hendricks, E., Chevalier, A., Jensen, M., Sorenson, S.C., Trumpy, D., Asik, J., (1996). Modelling of the Intake Manifold Filling Dynamics, Doi:
  6. Jones, V.K., Ault, B.A., Franklin, G.F., Powell, J.D., (1995). Identification and air-fuel ratio control of a spark ignition engine. Control Systems Technology, IEEE Transactions On 3(1): 14–21, Doi: 10.1109/87.370705
  7. Tseng, T.-C., Cheng, W.K., (1999). An Adaptive Air/Fuel Ratio Controller for SI Engine Throttle Transients, Doi: https://doi. org/10.4271/1999-01-0552
  8. Al-Olimat, K.S., Ghandakly, A.A., Jamali, M.M., (2000). Adaptive Air-Fuel Ratio Control of an SI Engine Using Fuzzy Logic Parameters Evaluation, Doi: 10.4271/2000-01-1246
  9. Wang, S.W., Yu, D.L., Gomm, J.B., Page, G.F., Douglas, S.S., (2006). Adaptive neural network model based predictive control for air–fuel ratio of SI engines. Engineering Applications of Artificial Intelligence 19(2): 189–200, Doi:
  10. Suzuki, K., Tielong, S., Kako, J., Yoshida, S., (2009). Individual A/F Estimation and Control With the Fuel–Gas Ratio for Multicylinder IC Engines. Vehicular Technology, IEEE Transactions On 58(9): 4757–68, Doi: 10.1109/TVT.2009.2025862
  11. Ljung, L., (1998). System Identification: Theory for the User. Pearson Education
  12. Han, P., Liu, H.-J., Meng, L.-M., Wang, N., (2005). Research of grey predictive fuzzy controller for large time delay system. 2005 International Conference on Machine Learning and Cybernetics, vol
  13. IEEE p. 829–33
  14. Kayacan, E., Kaynak,