Journals / European Mechanical Science / 2020 / Cilt: 4 - Sayı: 4

A Simple Approach for Controlling an Open-Source Syringe Pump

Pages
166–170
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Simultaneous and adjustable flow control, and detailed characterization of the volume flow rates for different syringe volumes are also demonstrated.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Precise control of fluid flows in microfluidic applications is crucial for various applications in lab-on-a-chip and point-of-care diagnostics.
📊
Key Findings & Data:There are various open-sourced alternative syringe pump systems that can be fabricated and assembled using 3D printing, but they lack versatile control and flow rate characterization that are required for microfluidic applications.
💡
Conclusion & Impact:Simultaneous and adjustable flow control, and detailed characterization of the volume flow rates for different syringe volumes are also demonstrated.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:syringe pump · microfluidics · flow control

Abstract

Precise control of fluid flows in microfluidic applications is crucial for various applications in lab-on-a-chip and point-of-care diagnostics. Standard bench-top equipment for providing this capability are syringe pumps. However, high cost of these systems limit their availability in low resourced laboratories. There are various open-sourced alternative syringe pump systems that can be fabricated and assembled using 3D printing, but they lack versatile control and flow rate characterization that are required for microfluidic applications. We report a simple and cost-effective approach to control an open-source multi-channel syringe pump. Simultaneous and adjustable flow control, and detailed characterization of the volume flow rates for different syringe volumes are also demonstrated.

🔖

Cite This Article

Akkoyun, F., Ozcelik, A. (2022). A Simple Approach for Controlling an Open-Source Syringe Pump. European Mechanical Science, Cilt: 4 - Sayı: 4, 166–170. https://ajindex.com/articles/512427

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. Weibel, D., Whitesides, G. (2006). Applications of microfluidics in chemical biology. Current Opinion in Chemical Biology, 10(6): 584–91. doi: 10.1016/j.cbpa.2006.10.016. Whitesides, G.M. (2006). The origins and the future of microfluidics. Nature, 442(7101): 368–73. doi: 10.1038/nature05058. Rivet, C., Lee, H., Hirsch, A., Hamilton, S., Lu, H. (2011). Microfluidics for medical diagnostics and biosensors. Chemical Engineering Science, 66(7): 1490–507. doi: 10.1016/j.ces.2010.08.015. Tosun, E., Ozgur, T., Ozgur, C., Ozcanli, M., Serin, H., Aydin, K. (2017). Comparative analysis of various modelling techniques for emission prediction of diesel engine fueled by diesel fuel with nanoparticle additives. European Mechanical Science, 1(1): 15–23. doi: 10.26701/ems.320490. Kaleli, A.R. (2019). Gray based Fuzzy Gain-Scheduling PID Controller Design for Air-Fuel System Under Variable Engine Operating Conditions. European Mechanical Science, 3(4): 125–32. doi: 10.26701/ems.599452. Lu, M., Ozcelik, A., Grigsby, C.L.C.L. Zhao, Y., Guo, F., Leong, K.W.K.W., et al., (2016). Microfluidic hydrodynamic focusing for synthesis of nanomaterials. Nano Today, 11(6): 778–92. doi: 10.1016/j.nantod.2016.10.006. Li, Z., Mak, S.Y., Sauret, A., Shum, H.C. (2014). Syringe-pump-induced fluctuation in all-aqueous microfluidic system implications for flow rate accuracy. Lab on a Chip, 14(4): 744. doi: 10.1039/c3lc51176f. Wijnen, B., Hunt, E.J., Anzalone, G.C., Pearce, J.M. (2014). Open-Source Syringe Pump Library. PLoS ONE, 9(9): e107216. doi: 10.1371/journal.pone.0107216. Pearce, J.M. (2014). Cut costs with open-source hardware. Nature, 505(7485): 618–618. doi: 10.1038/505618d. Pearce, J.M. (2012). Building Research Equipment with Free, Open-Source Hardware. Science, 337(6100): 1303–4. doi: 10.1126/science.1228183. Juarez, A., Maynard, K., Skerrett, E., Molyneux, E., Richards-Kortum, R., Dube, Q., et al. (2016). AutoSyP: A Low-Cost, Low-Power Syringe Pump for Use in Low-Resource Settings. The American Journal of Tropical Medicine and Hygiene, 95(4): 964–9. doi: 10.4269/ajtmh.16-0285.
  2. Skerrett, E., Kommwa, E., Maynard, K., Juarez, A., Mataya, R., Richards-Kortum, R., et al. (2017). Evaluation of a low-cost, low-power syringe pump to deliver magnesium sulfate intravenously to pre-eclamptic women in a Malawian referral hospital. BMC Pregnancy and Childbirth, 17(1): 191. doi: 10.1186/s12884-017-1382-9.
  3. Zhang, P., Bachman, H., Ozcelik, A., Huang, T.J. (2020). Acoustic Microfluidics. Annual Re