Journals / European Mechanical Science / 2021 / Cilt: 5 - Sayı: 1

Design and Thermal Analysis of High Power LED Light

Pages
28–33
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Finally, the experimental studies were carried out to verify the feasibility of numerical solutions that they were in good agreement.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the development of lighting technologies, light emitting diode (LED) technology plays an important role due to its high efficiency.
📊
Key Findings & Data:On other hand, cooling of high power LED is crucial factor to utilize LED in high performance.
💡
Conclusion & Impact:Finally, the experimental studies were carried out to verify the feasibility of numerical solutions that they were in good agreement.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:LED · lighting · un-finned heat sink

Abstract

In the development of lighting technologies, light emitting diode (LED) technology plays an important role due to its high efficiency. LED lightening is the future of indoor and outdoor illumination solutions that all around of the world there is a widespread transition to save energy and have better quality illumination via LED-based solutions. On other hand, cooling of high power LED is crucial factor to utilize LED in high performance. In addition, finned heat sink could not be efficient based on the its geometry and usage areas due to the powder, the rain and the muds effects. In this study, an un-finned heat sink LED armature consisting of aluminum sheet metal was designed using a computer-aided-design (CAD) program. Furthermore, manufacturing of the heat sinks from sheet metal plates with bending machines enables to increase variety of LED armatures cheaply according to design requirements. Then, the thermal analysis of the system was conducted for the case of natural heat convection under different electrical powers and ambient temperatures by a commercial finite element analysis (FEA) program: SolidWorks Simulation. As a result of the thermal analysis, the ultimate heat sink sizes were obtained to minimize junction temperature of LED. Finally, the experimental studies were carried out to verify the feasibility of numerical solutions that they were in good agreement.

🔖

Cite This Article

Karaman, C., Karaman, O., Sümer, Y. (2022). Design and Thermal Analysis of High Power LED Light. European Mechanical Science, Cilt: 5 - Sayı: 1, 28–33. https://ajindex.com/articles/512400

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Zhang, J., Xu, L., Wu, X., & Qian, Z. (2011). A Precise Passive Current Balancing Method for Multioutput LED Drivers. IEEE Transactions on Power Electronics, 26(8), 2149–2159. https://doi.org/10.1109/tpel.2010.2104332
  2. Khan, T. Q.,Bodrogi, P., Vinh, Q. T., &Winkler, H. (Eds.). (2015). LED lighting: Technology and perception. John Wiley&Sons. Krames, M. R., Shchekin, O. B., Mueller-Mach, R., Mueller, G. O., Zhou, L., Harbers, G., &Craford, M. G. (2007). Status and Future of High-Power Light-Emitting Diodes for Solid-State Lighting. Journal of Display Technology, 3(2), 160–175. https://doi.org/10.1109/jdt.2007.895339
  3. Pimputkar, S., Speck, J. S., Den Baars, S. P., & Nakamura, S. (2009). Prospects for LED lighting. Nature Photonics, 3(4), 180–182. https://doi.org/10.1038/nphoton.2009.32
  4. Hui, S. Y., & Qin, Y. X. (2009). A General Photo-Electro-Thermal Theory for Light Emitting Diode (LED) Systems. IEEE Transactions on Power Electronics, 24(8), 1967–1976. https://doi.org/10.1109/tpel.2009.2018100
  5. Ye, H., & Zhang, G. (2011). A review of passive thermal management of LED module. Journal of Semiconductors, 32(1), 014008. https://doi.org/10.1088/1674-4926/32/1/014008
  6. Dong, T., & Narendran, N. (2009). Understanding heat transfer mechanisms in recessed LED luminaires. In I. T. Ferguson, C. Hoelen, J. Jiao, & T. Taguchi (Eds.), Ninth International Conference on Solid State Lighting. SPIE. https://doi.org/10.1117/12.829902
  7. Dong, T. (2010). An analysis of heat transfer in LED luminaires. Rensselaer Polytechnic Institute. Wang, R., & Li, J. (2010). A Cooling System with a Fan for Thermal Management of High-Power LEDs. Journal of Modern Physics, 01(03), 196–199. https://doi.org/10.4236/jmp.2010.13029
  8. Hou, F., Yang, D., & Zhang, G. (2011). Thermal analysis of LED lighting system with different fin heat sinks. Journal of Semiconductors, 32(1), 014006. https://doi.org/10.1088/1674-4926/32/1/014006
  9. Tang, Y., Chen, Q., Guan, W., Li, Z., Yu, B., & Yuan, W. (2017). Thermal analysis of an LED module with a novelly assembled heat pipe heat sink. Journal of Central South University, 24(4), 921–928. https://doi.org/10.1007/s11771-017-3494-9
  10. Moon, S. H., Park, Y. W., & Yang, H. M. (2017). A single unit cooling fins aluminum flat heat pipe for 100 W socket type COB LED lamp. Applied Thermal Engineering, 126, 1164-1169.
  11. Huang, D. S., Chen, T. C., Tsai, L. T., & Lin, M. T. (2019). Design of fins with a grooved heat pipe for dissipation of heat from high-powered automotive LED headlights.