Journals / European Mechanical Science / 2022 / Cilt: 6 - Sayı: 3

Estimation of three-point bending behavior using finite element method for 3D-printed polymeric sandwich structures with honeycomb and reentrant core

Pages
196–200
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

A minimum equivalent stress value was found in the ABS material, while a maximum equivalent stress value was found in the PLA material.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Sandwich structures are known as ultra-light porous materials.
📊
Key Findings & Data:Because the structure has advantages in terms of acoustics, fatigue, and impact resistance that conventional stiffened plates cannot match, it has become a popular material in aerospace, automotive, marine, windmill, and architectural applications.
💡
Conclusion & Impact:A minimum equivalent stress value was found in the ABS material, while a maximum equivalent stress value was found in the PLA material.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Sandwich Structures · 3D printing · Finite Element Analysis

Abstract

Sandwich structures are known as ultra-light porous materials. Because the structure has advantages in terms of acoustics, fatigue, and impact resistance that conventional stiffened plates cannot match, it has become a popular material in aerospace, automotive, marine, windmill, and architectural applications. One promising method for decreasing production waste and enhancing flexural stress is to employ Additive Manufacture (AM) technologies for sandwich structure manufacturing. In this study, polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), and polyethylene terephthalate glycol (PETG) sandwich structures with reentrant and honeycomb cores were designed and then a finite element analysis (FEA) was carried out to compare the stress distributions in these sandwich composites. According to the findings, higher flexure stresses and specific energy absorption were obtained in the reentrant sandwich structures compared to honeycomb sandwich structures. A minimum equivalent stress value was found in the ABS material, while a maximum equivalent stress value was found in the PLA material.

🔖

Cite This Article

ERYILDIZ, M. (2022). Estimation of three-point bending behavior using finite element method for 3D-printed polymeric sandwich structures with honeycomb and reentrant core. European Mechanical Science, Cilt: 6 - Sayı: 3, 196–200. https://ajindex.com/articles/512367

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (3)

  1. Xie, S., Feng, Z., Zhou, H., & Wang, D. (2021). Three-point bending behavior of Nomex honeycomb sandwich panels: Experiment and simulation. Mechanics of Advanced Materials and Structures, 28(18): 1917-1931, DOI:10.1080/15376494.2020.1712751 Sarvestani, H. Y., Akbarzadeh, A. H., Mirbolghasemi, A., & Hermenean, K. (2018). 3D printed meta-sandwich structures: Failure mechanism, energy absorption and multi-hit capability. Materials & Design, 160: 179-193, DOI:10.1016/j.matdes.2018.08.061 Pollard, D., Ward, C., Herrmann, G., & Etches, J. (2017). The manufacture of honeycomb cores using Fused Deposition Modeling. Advanced Manufacturing: Polymer & Composites Science, 3(1): 21-31, DOI:10.1080/20550340.2017.1306337 de Castro, B. D., Magalhães, F. D. C., Panzera, T. H., & Campos Rubio, J. C. (2021). An assessment of fully integrated polymer sandwich structures designed by additive manufacturing. Journal of Materials Engineering and Performance, 30(7): 5031-5038, DOI:10.1007/s11665-021-05604-8
  2. Qi, C., Remennikov, A., Pei, L. Z., Yang, S., Yu, Z. H., & Ngo, T. D. (2017). Impact and close-in blast response of auxetic honeycomb-cored sandwich panels: experimental tests and numerical simulations. Composite structures, 180: 161-178, DOI: 10.1016/j.compstruct.2017.08.020 Zaharia, S. M., Enescu, L. A., & Pop, M. A. (2020). Mechanical performances of lightweight sandwich structures produced by material extrusion-based additive manufacturing. Polymers, 12(8): 1740, DOI: 10.3390/polym12081740 Ingrole, A., Hao, A., & Liang, R. (2017). Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement. Materials & Design, 117: 72-83, DOI:10.1016/j.matdes.2016.12.067 Li, T., & Wang, L. (2017). Bending behavior of sandwich composite structures with tunable 3D-printed core materials. Composite Structures, 175: 46-57, DOI:10.1016/j.compstruct.2017.05.001 Essassi, K., Rebiere, J. L., El Mahi, A., Souf, M. A. B., Bouguecha, A., & Haddar, M. (2020). Experimental and analytical investigation of the bending behaviour of 3D-printed bio-based sandwich structures composites with auxetic core under cyclic fatigue tests. Composites Part A: Applied Science and Manufacturing, 131: 105775, DOI:10.1016/j.compositesa.2020.105775 Yang, S., Qi, C., Guo, D. M., & Wang, D. (2012). Energy absorption of an re-entrant honeycombs with negative Poisson’s ratio. In Applied Mechanics and Materials (Vol. 148, pp. 992-995).
  3. Trans Tech Publications Ltd., DOI:10.4028/www.scientific.