SavedAdd your journal

Journals / European Journal of Technique / 2020 / Cilt: 10 - Sayı: 1

MECHANICAL PROPERTIES OF COMPOSITE PLATES AT DIFFERENT CONDITIONS

Kadir TURAN
Gurbet ÖRÇEN
Sedat BİNGÖL
Pages
13–24
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

At the end of the study, it was determined that the mechanical properties of the composite plates changed when the thermal aging temperature and temperature increased.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study; the effects of thermal aging on the mechanical properties of composite materials were investigated.
📊
Key Findings & Data:The time changes were 1, 3 and 5 hours, and 50 0C, 100 0C, and 150 0C were used for temperature changes.
💡
Conclusion & Impact:At the end of the study, it was determined that the mechanical properties of the composite plates changed when the thermal aging temperature and temperature increased.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study; the effects of thermal aging on the mechanical properties of composite materials were investigated. In study, eight layered woven glass fiber reinforced epoxy composite plates were used. Thermal aging was performed in an electric furnace using time and temperature change parameters. The time changes were 1, 3 and 5 hours, and 50 0C, 100 0C, and 150 0C were used for temperature changes. Thermally aged composite plates, at specified time and temperature values; modulus of elasticity, poisson ratio, tensile strength, compression strength, shear modulus and shear strength were determined in fiber reinforcement direction. The results obtained were compared with the results obtained from the specimens waited at room temperature. At the end of the study, it was determined that the mechanical properties of the composite plates changed when the thermal aging temperature and temperature increased.

🔖

Cite This Article

TURAN, K., ÖRÇEN, G., BİNGÖL, S. (2022). MECHANICAL PROPERTIES OF COMPOSITE PLATES AT DIFFERENT CONDITIONS. European Journal of Technique, Cilt: 10 - Sayı: 1, 13–24. https://ajindex.com/articles/512031

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Mouzakis, D.E., Zoga, H., Galiotis, C., Accelerated Environmental Ageing Study of Polyester/Glass Fiber Reinforced Composites (GFRPCs), Composites: Part B, 39 (2008),pp. 467– 475
  2. Leveque, D., Schieffer, A., Mavel, A., Maire, J.F., Analysis of How Thermal Aging Affects The Long-Term Mechanical Behavior and Strength of Polymer–Matrix Composites, Composites Science and Technology,65 (2005), pp.395–401
  3. Tsotsis, T.K., Keller, S., Lee,K., Bardis, J., Bish J., Aging of Polymeric Composite Specimens for 5000 Hours at Elevated Pressure and Temperature, Composites Science and Technology, 61 (2001), pp. 75-86
  4. Muliana, A., Nair, A., Khan, KL.A., Wagner, S., Characterization of Thermo-Mechanical and Long-Term Behaviors of Multi-Layered Composite Materials, Composites Science and Technology, 66 (2006),pp. 2907–2924
  5. Alcock, B., Cabrera, N.O., Barkoula, N.M., Reynolds, C.T., Govaert, L.E., Peijs, T., The Effect of Temperature and Strain Rate on the Mechanical Properties of Highly Oriented Polypropylene Tapes and All-Polypropylene Composites, Composites Science and Technology, 67 (2007), pp. 2061–2070
  6. Brinson, L.C., Gates, T.S., Effects of Physical Aging on Long Term Creep of Polymers and Polymer Matrıx Composites, Inf. J. Solids Structures, 32( 1995 ), pp. 827-846
  7. Dlouhy, I., Chlup, Z., Boccaccini, D.N., Atiq, S., Boccaccini, A.R., Fracture Behaviour of Hybrid Glass Matrix Composites: Thermal Ageing Effects, Composites: Part A, 34 (2003), pp.1177–1185
  8. Ray, B.C., Thermal Shock on Interfacial Adhesion of Thermally Conditioned Glass Fiber/Epoxy Composites, Materials Letters, 58 (2004), pp.2175–2177
  9. Hu, H., Sun, C.T., The Characterization of Physical Aging in Polymeric Composites, Composites Science and Technology, 60 (2000), pp. 2693-2698
  10. Belaid, S., Chabira, S.F., Balland, S.P., Sebaa, M., Belhouideg, S., Thermal Aging Effect on The Mechanical Properties of Polyester Fiberglas Composites, J. Mater. Environ. Sci., 6 (2015),10, pp.2795-2803 [11] Cao, S., Wu, Z., Wang, X., Tensile Properties of CFRP and Hybrid FRP Composites at Elevated Tempertures, Journal of composite materials,43(2009), 4
  11. Cao, S., Wu, Z., Tensile Properties of FRP Composites at Elevated and High Temperatures, Journal of applied mechanics, 11(2008),pp. 963-970
  12. Sauder, C., Lamon, J., Paille, R., The Tensile Behavior of Carbon Fibers at High Temperatures up to 2400 0C, Carbon, 42 (2004),pp. 715–725
  13. Nikolaev, V.P., Myshenkova, E.V., Pichu