SavedAdd your journal

Journals / Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2019 / Cilt: 12 - Sayı: 1

Variation of the viscosity of (2-phenyl-1,3 Dioxane-4-yl) methyl methacrylate-co-ethyl methacrylate polymer with temperature and concentration

(2-Fenil-1,3 Dioksalan -4-il) Metilmetakrilat-Ko-EtilmetakrilatPolimer ÇözeltilerininViskozitesinin Sıcaklık ve Konsantrasyon ile Değişim

Zülfiye İLTER
Filiz KAR
Pages
358–366
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The activation energy is ranges between 4.07-11.87 kJ / mol.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the effects of temperature and concentration on the viscosity of (2-Phenyl-1,3 Dioxane-4-yl) methylmethacrylate-co-ethylmethacrylate (PDMMA-co-EMA) co-polymer, presented in another study the synthesis data, examined at five different temperatures..
📊
Key Findings & Data:For this, viscosity values were measured using the Ubbelohde type viscometer (capillary no: Ic, ID: 0.84 mm and k: 0.03005).
💡
Conclusion & Impact:The activation energy is ranges between 4.07-11.87 kJ / mol.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the effects of temperature and concentration on the viscosity of (2-Phenyl-1,3 Dioxane-4-yl) methylmethacrylate-co-ethylmethacrylate (PDMMA-co-EMA) co-polymer, presented in another study the synthesis data, examined at five different temperatures.. For this, viscosity values were measured using the Ubbelohde type viscometer (capillary no: Ic, ID: 0.84 mm and k: 0.03005). Densities of solutions were measured using Gay–Lussac type pycnometer. The effects of temperature was described by an Arrhenius-type equation and the effect of concentration was described by two types of equation, power-law and exponential. Equations were derived which describes the combined effects of temperature and concentration on the viscosity for two different models in the rang of temperatures and concentrations studied. The activation energy is ranges between 4.07-11.87 kJ / mol.

Özet

Bu çalışmada sentezleme verileri başka bir çalışmada sunulan (2-Fenil-1,3 Dioksalan-4-il) metilmetakrilat-koetilmetakrilat (PDMMA-ko-EMA) polimer çözeltilerinin viskozitesine sıcaklık ve konsantrasyonun etkileri beşfarklı sıcaklıkta araştırıldı. Bunun için Ubbelohde tipi viskozimetre (kılcal no: Ic, ID: 0.84 mm ve k: 0.03005)kullanılarak viskozite değerleri, Gay-Lussac tipi piknometre kullanılarak yoğunluk değerleri ölçülmüştür.Sıcaklığın etkisi Arrhenius tipi bir denklem ile konsantrasyonun etkisi ise iki tür denklem, power ve üstel modelile tanımlanmıştır. Sıcaklık ve konsantrasyonun etkisini birlikte ifade eden denklemler türetilmiştir. Aktivasyonenerjisi 4.07-11.87 kJ/mol arasında değişmektedir.

🔖

Cite This Article

İLTER, Z., KAR, F. (2022). Variation of the viscosity of (2-phenyl-1,3 Dioxane-4-yl) methyl methacrylate-co-ethyl methacrylate polymer with temperature and concentration. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 12 - Sayı: 1, 358–366. https://ajindex.com/articles/505473

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Açıkbaş Y., Çankaya N., Capan R., Erdogan M., Soykan C., 2016. “Swelling behavior of the 2-(4- methoxyphenylamino)-2-oxoethyl methacrylate monomer LB thin film exposed to various organic vapors by quartz crystal microbalance technique”, Journal of Macromolecular Science, Part A:Pure and Applied Chemistry, 53 (1), 18–25.
  2. Balaji, R., Subramanian, K., Nanjundan, S., Rami Reddy, A. V., 2000. “Copolymers of 4-(4′- chlorocinnamoyl)phenyl methacrylate and methyl methacrylate: Synthesis, characterization and determination of reactivity ratios”, Journal of Appl. Polymer Science, 78, 1412- 1418. Barım G., Coşkun M., 2012. “(2,3-Difenil1,3-oksazolidin-5-il) metil metakrilat’ın metil metakrilat ile kopolimerlerinin sentezi, karakterizasyonu ve termal özellikleri”, Adıyaman Üniversitesi, Fen Bilimleri Dergisi, 2 (2), 75- 85. Brar, A.S., Malhotra, M. 1996. “Compositional assignments and sequence distribution of vinylidene chloride-methyl acrylate copolymers using one- and two- dimensional NMR spectroscopy”, Macromolecules, 29, 7470-7476.
  3. Coşkun, M., İlter, Z., 2002. “Copolymerization of (2‐phenyl‐1,3‐dioxolane‐4‐yl)methyl methacrylate with alkyl methacrylates: Reactivity ratios and copolymer characterization”, Journal of Polymer Science:Part A:Polymer Chemistry,40,1184–1191
  4. Demirelli, K., Kurt, A., Coşkun, M., 2004. “Atom transfer radical polymerization of 1-phenoxycarbonyl ethyl methacrylate monomer”, European Polymer Journal, 40, 451–457.
  5. Erol, I., Kolu, S., 2010. “Copolymers of a new methacrylate monomer bearing oxime ester and ether with methyl methacrylate: Synthesis, characterization, monomer reactivity ratios, and biological activity”, Journal of Applied Polymer Science, 120, 279– 290. Huggins, M.L., 1942. Journal of American Chemical Society, 64, 2716-2720.
  6. Ibarz, A., Vincente, M., Graelle,S., 1987. “Reological behaviour of apple juice and pear juice and their concentrates”, Journal of Food Engineering, 6, 257- 267. İlter, Z., Alhanlı, F., Doğan, F., Kaya,İ., 2012.” Synthesis and Characterization of an Arcylate Polymer Containing Chlorin 1-3 Dioxalane Groups in Side Chains”. Chinese Journal of Polymer Science, 30,642-651
  7. İlter, Z., Alhanlı, F., Yılmaz, S., 2017. “Poli [2 – (p – Brom Fenil) 1,3 – Dioksalan – 4 – il] Metil Akrilat Kopolimerlerinin Sentezi, Karakterizasyonu ve Fiziksel Özellikleri”, Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 10(1), 23- 37. Jone Selvamalar, C. S., Vijayanand, P. S., Penlidis, A., Nanjundan, S., 2004.“Homopolymer and cop