SavedAdd your journal

Journals / Electrica / 2021 / Cilt: 21 - Sayı: 3

Printed Band-Stop Filter for Mitigation of Electromagnetic Interference

Anjini Kumar TIWARY
Nisha GUPTA
Journal
Electrica
Pages
298–304
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

A good agreement between the two is evident.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:A new printed microstrip band-stop filter is proposed and implemented.
📊
Key Findings & Data:Moreover, the filter configuration can be easily incorporated in the microstrip feed line connected with a radiating element to reject the signal at the desired band for mitigating the electromagnetic interference.
💡
Conclusion & Impact:A good agreement between the two is evident.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

A new printed microstrip band-stop filter is proposed and implemented. A systematic design approach is presented to realize the filter for a specific band of operation employing the concept of SIR and embedded stub. The proposed filter design is suitable for multiple stop band applications. Moreover, the filter configuration can be easily incorporated in the microstrip feed line connected with a radiating element to reject the signal at the desired band for mitigating the electromagnetic interference. A prototype model of the proposed design is developed, and characteristics are measured and compared with the simulation result. A good agreement between the two is evident.

🔖

Cite This Article

TIWARY, A. K., GUPTA, N. (2022). Printed Band-Stop Filter for Mitigation of Electromagnetic Interference. Electrica, Cilt: 21 - Sayı: 3, 298–304. https://ajindex.com/articles/499913

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. T. Hubing, “Printed circuit board EMI source mechanisms.” IEEE Symposium on Electromagnetic Compatibility, Symposium Record, vol.1,, pp. 1–3, 2003
  2. S. Wu and Y. Lin, “A wideband noise-isolation bandstop power distribution network using quarter-wavelength line-based structure,” IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 4, no. 6, pp. 1071–1081, 2014
  3. A. K. Tiwary and N. Gupta, “Compact wide band printed filter with improved out-of-band performance,” Applied Computational Electromagnetics Society Journal, vol. 29, pp. 224–230, 2014
  4. C.-W. Hsue, C.-W. Ling and W.-T. Hung, “Discrete-time notch filter and its application to microwave filter,” Microwave and Optical Technology Letters, vol. 50, no. 6, pp. 1596–1600, 2008
  5. M. Sagawa, M. Makimoto and S. Yamashita, “Geometrical structures and fundamental characteristics of microwave stepped-impedance resonators,” IEEE Transactions on Microwave Theory and Techniques, vol. 45, no. 7, pp. 1078–1085, 1997
  6. M. Makimoto and S. Yamashita, Microwave Resonators and Filters for Wireless Communication Theory, Design and Application. Germany: Springer-Verlag, 2001
  7. D. Li, Kai-Da. Xu and A. Zhang, “Single-ended and balanced bandpass filters using multiple pairs of coupled lines and steppedimpedance stubs,” IEEE Access, vol. 8, pp. 13541–13548, 2020
  8. Y. Cai, Kai-Da. Xu, Z. Ma and Y. Liu, “Compact bandstop filters using coupled lines and open/short stubs with multiple transmission poles,” IET Microwaves, Antennas & Propagation, vol. 13, no. 9, pp. 1368–1372, 2019
  9. X. Zuo and J. Yu, “A stepped-impedance bandstop filter with extended upper passbands and improved pass-band reflections,” AIP Advances, vol. 6, no. 9, pp. 1–7, 2016
  10. T. Lee, C. Kim, K. C. Son, K. S. Shin, B. Shrestha and K. Yoon, “A band-stop filter with wide stop band using T-shaped stepped impedance resonator and L-shaped open stub,” International Conference on Emerging Trends & Innovation in ICT (ICEI), Vol. 2017, 2017, pp. 154–156
  11. C. W. Hsue, Y. H. Tsai and C. Y. Wu, “Bandstop filters with variable upper passbands using embedded line, spur line and conventional microstrip,” Microwave and Optical Technology Letters, vol. 53, no. 8, pp. 1921–1924, 2011
  12. C. W. Hsue, R. Mittra, Y. Tsai and C. C. Hsu, “Microwave notch filters using embedded stubs,” Microwave and Optical Technology Letters, vol. 51, no. 12, pp. 2839–2842, 2009
  13. L. Kumar and M. S. Parihar, “A wide stopband low-pass filter with h