SavedAdd your journal

Journals / Düzce Üniversitesi Bilim ve Teknoloji Dergisi / 2019 / Cilt: 7 - Sayı: 2

PI Controller Design for Second Order Plus Time Delay Plants

İkinci Derece Zaman Gecikmeli Sistemler için PI Denetleyici Tasarımı

Bilal ŞENOL
Pages
27–37
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is observed that the tuning method satisfies desired gaincrossover frequency and phase margin specifications.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Analytical design scheme of a Proportional Integral controllers for the stability and performance of time delaysystems in the second order is presented in this paper.
📊
Key Findings & Data:The method proposed in the study achieves generalcomputation equations for mentioned systems.
💡
Conclusion & Impact:It is observed that the tuning method satisfies desired gaincrossover frequency and phase margin specifications.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Analytical design scheme of a Proportional Integral controllers for the stability and performance of time delaysystems in the second order is presented in this paper. The method proposed in the study achieves generalcomputation equations for mentioned systems. Inspired from the Bode’s ideal transfer function characteristics,gain crossover frequency and phase margin specifications are considered for the system. Then, thesespecifications are used to obtain the parameters of the controller. Analytically derived formulas by the proposedmethod are tested on some existing second order plus time delay plants in the literature and the results aregraphically given in the illustrative examples section. It is observed that the tuning method satisfies desired gaincrossover frequency and phase margin specifications.

Özet

Bu çalışmada ikinci dereceden zaman gecikmeli sistemlerin kararlılığı ve performansı için oransal integral denetleyicilerin analitik tasarımı verilmiştir. Çalışmada önerilen yöntem söz konusu sistemler için genelleştirilmiş hesaplama eşitliklerini elde etmektedir. Bode’nin ideal transfer fonksiyonunun karakteristiğinden esinlenerek, kazanç kesim frekansı ve faz payı şartları göz önüne alınmıştır. Daha sonra, bu şartlar denetleyicinin parametrelerini elde etmek için kullanılmıştır. Önerilen yöntemle analitik olarak türetilen formüller literatürde var olan bazı ikinci derece zaman gecikmeli sistemler üzerinde test edilmiş ve sonuçlar grafiksel olarak açıklayıcı örnekler bölümünde sergilenmiştir. Parametre ayarlama yönteminin istenen kazanç kesim frekansı ve faz payı şartlarını sağladığı gözlemlenmiştir.

🔖

Cite This Article

ŞENOL, B. (2022). PI Controller Design for Second Order Plus Time Delay Plants. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Cilt: 7 - Sayı: 2, 27–37. https://ajindex.com/articles/494354

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. W. K. Ho, C. C. Hang and L. S. Cao, "Tuning of PI controllers based on gain and phase margin specifications," IEEE International Symposium on Industrial Electronics, Xian, China, 1992, pp. 497-502
  2. Z. Ibrahim and E. Levi, "A comparative analysis of fuzzy logic and PI speed control in high performance AC drives using experimental approach," IEEE Industry Applications Conference, Rome, Italy, 2000, pp. 1210-1218
  3. M. Cheng, Q. Sun and E. Zhou, "New self-tuning fuzzy PI control of a novel doubly salient permanent-magnet motor drive," IEEE Transactions on Industrial Electronics, vol. 53, no. 3, pp. 814- 821, 2006
  4. Z. Miao, T. Han, J. Dang and M. Ju, “FOPI/PI controller parameters optimization using PSO with different performance criteria,” IEEE 2nd Information Technology, Networking, Electronic and Automation Control Conference (ITNEC), Chengdu, China, 2017, pp. 250-255
  5. B. Kar and P. J. Roy, “A Comparative Study Between Cascaded FOPI–FOPD and IOPI– IOPD Controllers Applied to a Level Control Problem in a Coupled Tank System,” Journal of Control Automation and. Electrical. Systems, vol. 29, no. 3, pp. 340-349, 2018
  6. C. Onat, S. E. Hamamci and S. Obuz, ”A Practical PI Tuning Approach For Time Delay Systems,” IFAC Proceedings, vol. 45, no. 14, pp. 102-107, 2012
  7. C. R. Madhuranthakam, A. Elkamel and H. Budman, “Optimal tuning of PID controllers for FOPTD, SOPTD and SOPTD with lead processes,” Chemical Engineering and Processing: Process Intensification, vol. 47, no. 2, pp. 251-264, 2008
  8. V. Ramakrishnan and M. Chidambaram, “Estimation of a SOPTD transfer function model using a single asymmetrical relay feedback test,” Computers & Chemical Engineering, vol. 27, no. 12, pp. 1779-1784, 2003
  9. C. Rajapandiyan and M. Chidambaram, “Closed-Loop Identification of Second-Order Plus Time Delay (SOPTD) Model of Multivariable Systems by Optimization Method,” Industrial & Engineering Chemistry Research, vol. 51, no. 28, pp. 9620-9633, 2012
  10. J. Lee, Y. Lee, D. R. Yang and T. F. Edgar, “Simple Proportional Integral Controller Tuning Rules for FOPTD and HOPTD Models Based on Matching Two Asymptotes,” Industrial & Engineering Chemistry Research, vol. 57, no. 8, pp. 2905-2916, 2018
  11. H. Liu, D. Li, J. Xi and Y. Zhong, “Robust attitude controller design for miniature quadrotors,” International Journal of Robust and Nonlinear Control, vol, 26, no. 4, pp. 681–696, 2016
  12. F. Tajaddodianfar, S. O. R. Moheimani, J. Owen and J. N. Randall, “