SavedAdd your journal

Journals / Düzce Üniversitesi Bilim ve Teknoloji Dergisi / 2021 / Cilt: 9 - Sayı: 2

Obtaining Maximum Electrical Energy with PV Panel Layout Optimization in Space Truss Roof Systems

Uzay Kafes Çatı Sistemlerinde PV Panel yerleşim optimizasyonu ile Maksimum Elektrik Enerjisi Elde Edilmesi

Okan BİNGÖL
Berkay KİRİŞ
Onur Mahmut PİŞİRİR
Pages
568–580
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

That the angle of solar radiation is different in curved space truss system affects the amount of voltage and current of the solar panels and overall system efficiency.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Solar panel is mostly applied in many roof types on buildings.
📊
Key Findings & Data:That the angle of solar radiation is different in curved space truss system affects the amount of voltage and current of the solar panels and overall system efficiency.
💡
Conclusion & Impact:Based on the simulation results, the highest efficiency will be obtained from the PV panels if PV panels application is made on the curved space truss roof system.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Fotovoltaik Paneller(PV) · Solar dizi · Uzay Kafes Sistemleri

Abstract

Solar panel is mostly applied in many roof types on buildings. That the angle of solar radiation is different in curved space truss system affects the amount of voltage and current of the solar panels and overall system efficiency. In this study, meteorological information of Isparta city, technical data of various solar panels, intra-year random shadow effect calculations are analyzed. The technic of genetic algorithm is applied, and the process of computerized simulation is performed in order to find the optimal solar panel combination. Based on the simulation results, the highest efficiency will be obtained from the PV panels if PV panels application is made on the curved space truss roof system.

Özet

Güneş paneli uygulaması genellikle çalışmalarda teras çatı, eğik çatı, cephe üzerine yapılmıştır. Eğimli uzay kafes sistemlerinde güneş ışınım açısının farklı olması, güneş panelleri üzerinde oluşan gerilim ve akım miktarını, toplam sistem verimini daha fazla etkilemektedir. Bu çalışmada; Isparta ilinin meteorolojik bilgileri, çeşitli güneş panellerinin teknik verileri, yıl içi rastlantısal gölge etkisi hesapları kullanılarak en uygun güneş paneli diziliminin bulunabilmesi için genetik algoritma tekniği uygulanmış bilgisayar ortamında simülasyon işlemi gerçekleştirilmiştir. Bu sonuçlara bağlı olarak, eğimli uzay kafes çatı sistemlerine PV panel uygulaması yapılırsa en yüksek verim elde edilebileceği sonucuna ulaşılmıştır.

🔖

Cite This Article

BİNGÖL, O., KİRİŞ, B., PİŞİRİR, O. M. (2022). Obtaining Maximum Electrical Energy with PV Panel Layout Optimization in Space Truss Roof Systems. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Cilt: 9 - Sayı: 2, 568–580. https://ajindex.com/articles/493955

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. O. M. Pisirir and O. Bingol, “Industrial PC based heliostat control for solar power towers,” Acta Physica Polonica A, vol. 130, no. 1, pp. 36–40, 2016
  2. O. Bingol and B. Ozkaya, “Analysis and comparison of different PV array configurations under partial shading conditions,” Solar Energy, vol. 160, no. 15, pp. 336–343, 2018
  3. S. K. Sahoo, “Renewable and sustainable energy reviews solar photovoltaic energy progress in India: A review,” Renew. Sustain. Energy Rev., vol. 59, pp. 927–939, 2016
  4. V. Khare, S. Nema, and P. Baredar, “Solar-wind hybrid renewable energy system: A review,” Renew. Sustain. Energy Rev., vol. 58, pp. 23–33, 2016
  5. L. Tripathi, A. K. Mishra, A. K. Dubey, C. B. Tripathi, and P. Baredar, “Renewable energy: An overview on its contribution in current energy scenario of India,” Renew. Sustain. Energy Rev., vol. 60, pp. 226–233, 2016
  6. O. Ellabban, H. Abu-Rub, and F. Blaabjerg, “Renewable energy resources: Current status, future prospects and their enabling technology,” Renew. Sustain. Energy Rev., vol. 39, pp. 748–764, 2014
  7. N. Kannan and D. Vakeesan, “Solar energy for future world: - A review,” Renew. Sustain. Energy Rev., vol. 62, pp. 1092–1105, 2016
  8. Y. Wu and Y. Xiao, “Steel and glubam hybrid space truss,” Eng. Struct., vol. 171, no. February, pp. 140–153, 2018
  9. B. Gül, G. Uzunboz, Z. Duran, Ş. Kaya, M. F. Çelik ve U. Aydar, “Çatı kafes si̇stemlerini̇n lazer tarayıcı yardımı i̇le modellenmesi̇,” 5.Uzaktan Algılama ve Coğrafi Bilgi Sistemleri Sempozyumu, İstanbul, Türkiye, 2014. [Çevrimiçi]. Erişim:
  10. A. Firatoglu and B. Yesilata, “Investigation of optimum design and operation conditions of photovoltaic systems with MPPT,” DEU Journal of Science and Engineering, vol. 5, no. 1, pp. 147–158, 2003
  11. E. Karatepe, M. Boztepe, and M. Colak, “Development of a suitable model for characterizing photovoltaic arrays with shaded solar cells,” Solar Energy, vol. 81, no. 8, pp. 977–992, 2007
  12. A. Mutlu, “Fotovoltaik çatı sistemlerinin tasarımı için bir model önerisi,” Yüksek Lisans tezi, Mimarlık Bölümü, İstanbul Teknik Üniversitesi, İstanbul, Türkiye, 2010
  13. Y. J. Wang and P. C. Hsu, “Analytical modelling of partial shading and different orientation of photovoltaic modules,” IET Renew. Power Gener., vol. 4, no. 3, pp. 272–282, 2010
  14. C. Deline, A. Dobos, S. Janzou, J. Meydbray, and M. Donovan, “A simplified model of uniform shading in large phot